Product Specifications: Dreamfly RC-G473 AIO 3-6S Ø MCU: STM32G473 Ø IMU: ICM-42688 Ø DJI 03 Air Unit Supported Ø BlackBox: 16Mb onboard Flash Ø Type-C USB interface Ø OSD: 7456E Ø Baro：SPL06 Ø BEC Output: 5V BEC Ø Firmware: BETAFLIGHT Ø Mounting hole sizes: 25.5-26.5mm Ø Continuous current: 35A Ø Peak current: 40A Ø Power input: 3-6S LiPo (11.4v-22.2V) Ø Signal support: Dshot300/Dshot600 Ø ESC firmware: Blue-jay B_X_40 48Khz

Product Introduction： MCU:STM32F722 IMU:ICM42688 OSD:AT7456E Baro：DPS310 BlackBox：16MB INPUT：11-30v 5v-BEC:5V/2.5A 10V-BEC:10V/2A UART:UART1,2,3,4,5,6 HD:UART1 SIZE:36X41MM HOLE:30.5X30.5MM Power input: 3-6S LiPo(11.1V-26V) Ø Support I2C be used to switch cameras Ø Motor signals: 8 PWM signals, S1-4 supports 8pin direct plug Ø Dual camera: cam1 interface is used by default, and USER1 can Dreamfly RC-F722 Ø PINIO: I01 is used to switch cameras, and I02 pad is reserved

Product Specifications of F722: Ø MCU: STM32F722 Ø IMU: ICM42688-P Ø DJI 03 Air Unit Supported Ø BlackBox: 16Mb onboard Flash Ø Type-C USB interface Ø OSD: AT7456E Ø Baro：SPL06 Ø BEC Output: 5V, 12V BEC Ø Firmware: BETAFLIGHT DREAMFLY F722 Ø Mounting hole sizes: 30.5×30.5mm，φ4mm Ø Power input: 3-6S LiPo(11.1V-26V) Ø Support I2C be used to switch cameras Ø Motor signals: 8 PWM signals, S1-4 supports 8pin direct plug Ø Dual camera: cam1 interface is used by default, and USER1 can Ø…

Mpu:efm8bb21 Firmware:BLHeli S Inputvoltage:3-6S(11.1-) steady-state current:60A peak current:65A(10S) pitch-row:30.5mmX30.5mm Aperture:Φ4mm

Mpu:efm8bb21 Firmware:BLHeli S Inputvoltage:3-4S(11.1-) steady-state current:50A peak current:60A(10S) pitch-row:30.5mmX30.5mm Aperture:Φ4mm