Custom FPV quad or fixed-wing build estimate in India
TechHobby in Jaipur specs custom FPV multirotors and RC airplanes, then confirms a compatible parts list on WhatsApp. The wizard is an estimate — not a checkout invoice.
Choose quad or fixed-wing, answer use, budget, and video questions, and see a package range based on kits we actually stock and build. You pay only after we agree the bill of materials. You remain responsible for DGCA and local flying rules. Jaipur workshop page
What TechHobby custom builds cover
TechHobby is an Indian FPV and RC electronics shop with a workshop in Jaipur. This page is for pilots who want a specified kit — not a mystery “complete drone” add-to-cart. We match a package from the catalog (whoop, cinewhoop, 5" freestyle or race, 7" long range, foam trainer, FPV wing, or mapping airframe), then confirm motors, stack, video, and radio on WhatsApp so the parts actually work together.
The rupee range is typical parts cost from stock we sell. Assembly labour is listed separately when you pick an assembled build. HD digital, GPS, and camera-drone RTF kits sit at the top of the range. A first analog 5" or a foam trainer sits lower.
Quad vs fixed-wing
A multirotor and a wing are different aircraft. Pick the airframe in step 1 so the wizard does not mix a 5" freestyle BOM with a trainer airplane.
| Question |
Multirotor / FPV quad |
Fixed-wing / RC airplane |
| How it flies |
Hover, punch, and crash-rebuild. Freestyle, race, or long-range explorer. |
Needs airspeed. Trainer, sport, FPV wing, cruise, or mapping. |
| First aircraft |
Indoor whoop or a gentle analog 5" after simulator time. |
Foam high-wing trainer, usually line-of-sight before FPV. |
| Typical extra parts |
4 motors, 4-in-1 ESC, props, frame. |
Servos, wing/fuse, often a single motor and a different CG check. |
| Photography / family flying |
Usually a ready-to-fly camera drone, not a custom FPV quad. |
Mapping / survey is a payload wing, not a DJI Mini. |
Analog vs HD vs line-of-sight
Video is a separate choice from the airframe. A trainer can stay LOS. An FPV wing or 5" needs analog or digital goggles that match the air unit.
| System |
Best for |
Trade-off |
| Line of sight (LOS) |
First foam trainer or sport airplane. |
No goggles. You watch the plane, not a camera. |
| Analog FPV |
First 5", racing, and lighter FPV wings. |
Cheaper and easier to repair. Softer image than digital. |
| HD digital (DJI O4 / HDZero / Walksnail) |
Clearer freestyle, cinematic, or HD wings. |
Higher kit cost. Goggles and air unit must match the brand family. |
Assembled vs DIY vs ready-to-fly
| You choose |
What TechHobby does |
What you do |
| Assembled custom build |
Confirm the BOM, then build and set it up. Labour is shown on the estimate. |
Pay after the WhatsApp parts list. Bind radio and fly legally. |
| DIY kit |
Confirm the plan on WhatsApp. We do not auto-pick catalog parts here. |
Solder, flash, and tune after we agree the kit. |
| Ready-to-fly recommendation |
Point at a stocked kit or camera drone when a custom airframe is the wrong tool. |
Buy from the product page. No custom frame. |
Custom FPV quad builds
TechHobby helps pilots specify a custom FPV multirotor — tiny whoop, cinewhoop, 5" freestyle, racing, or 7" long range — then talk through parts and assembly on WhatsApp. The number you see is a range based on typical kits we build and stock, not a checkout total.
| Package |
Frame |
Parts range |
Assembly |
Tiny whoop / indoor
Safe indoor trainer for first flights.
|
65–75mm |
₹8,000.00 – ₹18,000.00 |
₹1,500.00 |
Cinewhoop 2–3"
Ducted cinewhoop for close-proximity video.
|
2–3" |
₹18,000.00 – ₹35,000.00 |
₹2,000.00 |
5" analog freestyle
The classic first custom 5 inch freestyle quad.
|
5" |
₹22,000.00 – ₹40,000.00 |
₹2,500.00 |
5" HD freestyle
O4 / HDZero-class digital freestyle.
|
5" |
₹40,000.00 – ₹75,000.00 |
₹3,000.00 |
7" long range analog
Efficient 7 inch analog long-range explorer.
|
7" |
₹35,000.00 – ₹60,000.00 |
₹3,500.00 |
7" long range HD
Digital HD long-range explorer.
|
7" |
₹55,000.00 – ₹95,000.00 |
₹3,500.00 |
5" racing
Lightweight 5 inch race setup.
|
5" |
₹25,000.00 – ₹50,000.00 |
₹2,500.00 |
10" long range / cinelifter
10 inch analog explorer or HD cinelifter-style payload.
|
10" |
₹45,000.00 – ₹120,000.00 |
₹4,500.00 |
Camera drone (ready to fly)
DJI Mini / Air class — buy ready, do not custom-build.
|
RTF |
₹35,000.00 – ₹150,000.00 |
— |
Custom fixed-wing / RC airplane builds
The same workshop also specs foam trainers, sport airplanes, analog FPV wings, HD digital wings, long-range cruise wings, and mapping / survey airframes. Radio, CG, payload, and video are confirmed on WhatsApp. A trainer is usually line-of-sight; an FPV wing is a different aircraft from a 5" quad.
| Package |
Airframe |
Parts range |
Assembly |
Foam trainer airplane
Stable high-wing trainer for first landings.
|
1.0–1.4 m foam |
₹9,000.00 – ₹22,000.00 |
₹2,000.00 |
Sport / aerobatic airplane
Faster sport airframe once landings are consistent.
|
1.2–1.6 m |
₹18,000.00 – ₹45,000.00 |
₹3,000.00 |
FPV wing (analog)
Flying wing with analog video and ELRS.
|
600–900 mm wing |
₹16,000.00 – ₹32,000.00 |
₹2,500.00 |
FPV wing (HD digital)
O4 / HDZero / Walksnail flying wing.
|
700–1000 mm wing |
₹32,000.00 – ₹70,000.00 |
₹3,500.00 |
Long-range FPV wing
Efficient cruise wing with GPS and link margin.
|
900–1300 mm wing |
₹28,000.00 – ₹65,000.00 |
₹4,000.00 |
Mapping / survey wing
Straight-line endurance airframe with a camera or mapping mount.
|
1.2–2.0 m mapping airframe |
₹35,000.00 – ₹85,000.00 |
₹4,500.00 |
Anatomy of a custom build
A typical quad is a frame, motors, ESC, flight controller, video system, radio receiver, props, and a LiPo. A typical wing adds servos and a different airframe. The wizard does not suggest a shopping cart — the workshop confirms the kit on WhatsApp.
| Part |
Role on the aircraft |
Shop |
| Frames |
Airframe that holds motors, stack, and camera. Wings use a foam or composite plane instead. |
Frames |
| Motors |
Spin the props. Size and kV must match the frame and battery. |
Motors |
| Propellers |
Convert motor RPM into thrust. Pitch and diameter change feel and current draw. |
Propellers |
| Flight controllers |
The brain: gyro, firmware, and UART ports for video and radio. |
Flight controllers |
| ESCs |
Drive the motors. 4-in-1 stacks are common on 5" quads. |
ESCs |
| FPV cameras |
The camera the pilot sees. Analog, HDZero, Walksnail, or DJI O4. |
FPV cameras |
| VTX / air units |
Sends the camera image to the goggles. Separate from a radio receiver. |
VTX / air units |
| Radio & ELRS |
Control link. ExpressLRS is the usual choice on modern FPV kits. |
Radio & ELRS |
| GPS |
Position hold and return-to-home on long-range quads and wings. |
GPS |
| LiPo batteries |
Power source. Cell count (S) must match motors, ESC, and video system. |
LiPo batteries |
| FPV goggles |
What you fly in. Analog and digital goggles are not interchangeable. |
FPV goggles |
| Ready-to-fly |
Stocked kits and camera drones when a custom airframe is the wrong tool. |
Ready-to-fly |
Build vs ready-to-fly vs DJI
Custom FPV is for pilots who want to repair, tune, and crash-rebuild. A DJI Mini or Air is usually better for photography and family flying. If that is you, pick Photography on a quad path and we will recommend a ready-to-fly camera drone from the catalog.
Need a canopy, GPS mount, or GoPro adapter? Use our 3D printing service.
Broken ESC, FC, or O4 after a crash? Drone part repairing · ESC repair · O4 repair.
Talk to a builder
Named builders at the Jaipur workshop. WhatsApp or a link only appears when that person has one in admin.
Custom builder
- Multirotor UAV
- Fixed-Wing UAV
Our technical skills cover end-to-end UAV development, including multirotor and fixed-wing configuration, flight controller setup and tuning, firmware configuration, PID tuning, ESC and motor selection, ELRS and RC communication systems, GPS and telemetry integration, digital and analog FPV systems, UAV electronics and wiring, sensor integration, flight testing and performance optimization, CAD modeling, 3D printing and rapid prototyping, hardware troubleshooting, system integration, and custom UAV modification and upgrades.
Custom Builder
- Fixed-Wing UAVs
- Multirotor Drones
Specialized in Fixed-Wing UAVs, Multirotor Drones, Hybrid VTOL Aircraft, and Flight Dynamics & Testing, with strong expertise in aircraft design, aerodynamic performance, flight control, system integration, and experimental flight testing.
Builder & Technician
- FC & ESC Repair
- SMD/PCB Repair
FPV Drone Builder & Electronics Repair Technician – FPV Drone Assembly, FC/ESC Repair, Soldering, PCB/SMD Rework, Circuit Troubleshooting, Firmware Configuration, Motor/Power System Diagnostics, VTX/GPS/Receiver Installation & Component-Level Electronics Repair.
Meet our team
Frequently asked questions — quads
How much does a custom FPV quad cost in India?
At TechHobby, most custom 5" analog freestyle builds land around ₹22,000–₹40,000 for parts, plus assembly if you want it built in Jaipur. HD digital (DJI O4, HDZero, Walksnail) and 7" long-range kits cost more. The wizard on this page gives a range from typical stocked kits — not a final invoice.
Is the quote a checkout price?
No. TechHobby confirms a compatible bill of materials on WhatsApp before you pay. The number is an estimate so you can compare analog vs HD and assembled vs DIY.
Analog vs DJI O4 / HD for a 5" freestyle quad?
Analog is cheaper and easier to repair after a crash. Digital HD looks clearer and costs more; the goggles must match the air unit. Choose analog if this is your first custom 5" from TechHobby.
Can TechHobby assemble my quad?
Yes. Pick “Assembled custom build” after Multirotor. Assembly labour is shown separately on the estimate and confirmed on WhatsApp with the parts list.
Should I buy a DJI camera drone instead of a custom quad?
If you want photography, family flying, or obstacle avoidance, a ready-to-fly camera drone from the TechHobby catalog is usually the better first purchase. Custom FPV is a different sport: you repair, tune, and crash-rebuild.
Frequently asked questions — fixed-wing
Do you build fixed-wing and RC airplanes, not only quads?
Yes. TechHobby uses the same wizard: choose Fixed-wing on the first step. We estimate foam trainers, sport planes, analog FPV wings, HD wings, long-range wings, and mapping / survey airframes from the Jaipur workshop.
How much does a custom FPV wing cost in India?
A simple analog FPV wing through TechHobby often lands around ₹16,000–₹32,000 for parts. HD digital, long-range, and mapping wings cost more. Trainers can start under ₹15,000. The number is still an estimate until WhatsApp confirms the BOM.
Do I need FPV goggles for a trainer airplane?
No. A first foam trainer is usually line-of-sight. Add analog or HD FPV later when landings are consistent. Goggles are a separate catalog purchase.
Can you assemble a foam trainer or FPV wing?
Yes. Pick assembled in the last step. Servos, CG, and radio setup are confirmed on WhatsApp — not auto-checked-out.
Do you spec mapping or survey wings?
Yes. Choose Mapping / survey on the fixed-wing path. That is a camera-mount endurance airframe, not a 5" freestyle quad. Payload and autopilot are confirmed on WhatsApp.
Do I need a licence for a custom wing or quad in India?
You are responsible for DGCA rules and local flying restrictions. TechHobby can point you at official resources during the consult. We do not sell a licence or a legal exemption.
