SIYI ZR30 4K 8MP Ultra HD 180X Hybrid 30...
Overall Model: ZR30 Video Output Port: Ethernet, Micro-HDMI Control Signal Input Port: S.Bus, UART, Ethernet UDP Working Voltage: 11 to 25.2 V Power Consumption: – Average: 5 W – Summit: 12 W Working Temperature: -10 ~ 50 ℃ Dimension: 132*100*159 mm (including the quick release board) Weight: 628 g (including the quick release board) ZR30 Quick Release Board Dimension: 82*65*18 mm Weight: 38 g Gimbal Angular Vibration Range: ±0.01° Controllable Pitch Angle: -90° to +25° C…
SIYI ZR10 2K 4MP QHD 30X Hybrid Zoom Gim...
Overall Model: ZR10 Video Output Port: Ethernet Control Signal Input Port: S.Bus / PPM / UART / UDP Working Voltage: 11 to 25.2 V Power Consumption: 3 W Working Temperature: -10 ~ 50 ℃ Waterproof Level: IP4X Dimension: 121*101*78 mm Weight: 381 g Gimbal Angular Vibration Range: ±0.01° Controllable Pitch Angle: -90° to +25° Mechanical Pitch Angle: -135° to +45° Controllable Yaw Angle: -45° to +45° Mechanical Yaw Angle: -90° to +90° Camera Lens: 10X Optical Zoom (30X Hy…
iFlight iPower GBM2804H-100T Gimbal Moto...
Description of GBM2804H-100T The GBM2804H-100T motor by iPower Motors are the ultimate brushless gimbal motor for GoPro Cameras.This motor is designed for small multi-rotor platforms looking to lift GoPro sized gear – 0.5-1KG/cm Torque.The principle of the camera stabilization using brushless direct drive motors In fact, gimbal based on BLDC motors is very similar to regular gimbal based on hobby servo. Specifications of GBM2804H-100T Model: GBM2804 Motor Out Diameter: Ф35±0.05mm …
IFLIGHT GM3506 Encoder Combo Set
Description Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency. What’s encoder technology in brushless gimbal control system? The 3 axis stabilization gimbal system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization relies on the principles of inertia (the tende…
IFLIGHT GM110-8 Encoder Combo Set
Description Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency. What’s encoder technology in brushless gimbal control system? The 3 axis stabilization gimbal system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization relies on the principles of inertia (the tende…
iFlight Gimbal Motor Slipring - OD 7.9mm
Description A gimbal assembly comprising, an outer gimbal having a longitudinal axis, an inner gimbal pivotally supported by the outer gimbal coaxially therewith, a motor mounted on the inner gimbal with the motor having motor leads, a pivot unit pivotally connecting the inner gimbal to the outer gimbal coaxially therewith at one end thereof, and a slip ring unit pivotally connecting the inner gimbal to the outer gimbal coaxially therewith at the other end thereof with the slip ring …
AlexMos 32 BIT Extended BGC with GM110-1...
PRODUCT DESCRIPTION Encoders in the SimpleBGC project Using encoders with SimpleBGC board gives the following advantages: 1. Prevents motors from losing synchronization and skipping steps. 2. Provides the information about frame angle and angle of the camera relative to the frame, that can be important for some kind of applications. 3. Can significantly decrease power consumption by using field-oriented control strategy to drive motors. 4. Increases instant torque in the same w…
