Compact and lightweight GPS module with fast positioning and stable connection, ideal for FPV, RC airplanes, and quadcopters.

The VIFLY GPS-mate is an external power module for your GPS. This power module is equipped with an on/off switch and a built-in VIFLY Finder 2 lost drone alarm. The GPS never loses power until the switch is turned off, so pilots never need to complete another fix for the whole flying session. Why did we design GPS-mate? Most drone pilots have a problem when using the GPS on their drones. GPS modules are slow and get interference. For this to be fixed, a pilot must wait many minutes for a GPS…

After searching and testing a large number of beepers, VIFLY has come up wi that e Finder Mini, which features one of the loudest buzzers in a tiny size. The VIFLY Finder Mini is a smaller version of the VIFLY Finder 2. Weighs only 2.7g making it the perfect drone buzzer for the compact build! The Finder Mini can reach a volume up to 100 dB. Video Includes 1 x VIFLY Finder Mini Drone Buzzer

Buzzers are a great safeguard to add on any drone. This small investment can save you hundreds of dollars. The super loud alarm will alert you to where you lost your quad Advanced ViSense Technology With ViSense-based technology, the VIFLY Finder 2 can power itself to beep even the quad battery has been ejected. Even more, the built-in light sensor can detect light intensity and then smartly control the LED light to flash. Besides, it enables the buzzer to automatically enter into sleep mode…

Features Lost Drone Alarm by Motion Sensor Some drones like DJI models are installed with GPS that only provide you the draft location, with the sound help, you can find your lost drone precisely. With the built-in motion sensor and lipo battery, VIFLY Beacon can detect the drone crash automatically and make the alarm to help you locate the lost drone. Wireless, No Soldering Required The mechanism of VIFLY Beacon is based on the motion sensor, attach it anywhere on the drone to detect th…

Precision GPS / Glonass module for betaflight or pixhawk. SPECIFICATION Chipset – ublox UBX-M8030 Flash memory for saving configuration. Frequency – L1, 1575.42MHz ; L2,1561.10MHZ；L3,1602.00MHZ Baud Rate – 4800bps-921600bps (Default – 9600bps) Channel – 72ch Sensitivity – (Tracking: -164dBm) | (Capture: -159dBm) | (Cold Start – 147dBm) Cold start – Average 26 seconds Warm start – Average 24 seconds Hot start – Average 1 second Accuracy – (HorizontalPosition:Autonomous<2m …

Note: This GPS mount is fixed by a M3*8mm half-round head screw with a non-slip nut, please make sure to tighten the screw to prevent the fixing base from loosening. Product Description: ·Full CNC precision machining using 6061T6 process aluminum alloy ·Suitable for use with all types of multi-axis aircraft GPS installed with Φ16mm pipe diameter ·Metal base locked and mounted securely ·Prevent vibration from affecting antenna performance ·Quick-fold design makes GPS easy to carry when fol…

Product Description: ·Full CNC precision machining using 6061T6 process aluminum alloy ·Suitable for use with all types of multi-axis aircraft GPS installed with Φ16mm pipe diameter ·Metal base locked and mounted securely ·Prevent vibration from affecting antenna performance ·Quick-fold design makes GPS easy to carry when folded. Product specifications: Metal GPS mount × 1 (Φ29.4×12mm) Metal limit ring×1（Φ12×4.0mm）0.75G Metal GPS folding mount×1（Φ16×36×22mm）8.1G Φ4 metal antenn…

Making decisions with your RC car or plane can be tough, and it’s even tougher when you lack proper information. Know the facts before you make modifications with the SKYRC GSM020 GNSS Performance Analyzer. This satellite-connected device records data from your remote control vehicle and records it for analysis. The analyzer connects with GPS and GLONASS satellite systems to read your vehicle’s speed, time, distance, velocity, acceleration, and G-forces, collecting all the data you need for anal…

The ERS-GPS Telemetry Sensor is a specialized GPS unit designed by Radiomaster for use with compatible ExpressLRS PWM receivers. This plug-and-play sensor integrates with the receiver via the CRSF interface. Equipped with two modes— Mode one to provide accurate GPS data and Mode two to provide accurate ground speed. Mode one is ideal capturing position and altitude logs when used with our ER series receivers with built-in barometers. Mode two is ideal for measuring speed in airplanes, jets, bo…

Product Description 6061T6 Aluminum Alloy applied, full CNC processed. Applicable to X8, X6, X4 multi-copters. Fast and easy plug-in assembly The metal mount reduces flight vibration. Installation specification: M2.5 Installation pitch: 22MM Specification: Metal bottom mountx1 (28.3×17.3MM) 3.0G Metal GPS Mountx1 (29.4x12MM) 4mm CF link boltx1 (4x65MM)0.5G 7x29MM metal plugx1 4mm Phosphor Bronze ring x1 M2.5x5MM Hex Screw x2

Introduction MG-A01(M10 Ultra) GNSS module integrates a special version of u-blox 10th generation receiver chip – M10050, which run with higher frequency than normal, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 25 x 25 x 4mm patch antenna provides the best performance. Built-in flash , parameters can still be saved when module lost power. Why M10 Ul…

Introduction MG-903 GNSS module integrates a u-blox 9th generation receiver chip – M9140 and the magnetic sensor – IST8310. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 20 x 20 x 4mm patch antenna provides the best performance. u-blox M9 receivers support concurrent reception of four GNSS.The high number of visible satellites allows the receiver to select the best signals. This maximizes th…

Introduction MG-902 GNSS module integrates a u-blox 9th generation receiver chip – M9140 and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 25 x 25 x 4mm patch antenna provides the best performance. u-blox M9 receivers support concurrent reception of four GNSS.The high number of visible satellites allows the receiver to select the best signals. This maximizes t…

Introduction M10G-5883 GNSS module integrates the u-blox 10th generation receiver chip – M10050, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 18 x 18 x 4mm patch antenna provides the best balance between performance and small size. Built-in flash , parameters can still be saved when module lost power. Specifications GNSS Receiver: U-BLOX M10 (M1…

MATEKSYS M10Q-5883 GNSS & COMPASS The MATEKSYS M10Q-5883 supports GNSS (GPS, GLONASS, Galileo, and BeiDou) and thus offers excellent RF sensitivity. The SAM-M10Q uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. This feature will help you pick up the best signals. But also enhance the dynamic position accuracy with small a…

SAM-M10Q uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as…

The iFlight M8Q-5883 GPS comes with an integrated QMC5883L compass module, b uilt-in TCXO crystal, and farad capacitor for a faster hot start, additional front-end LNA and many other features! Features 10 Hz Refresh rate (600 times/second) Additional front-end LNA (Low Noise Amplifier) High sensitivity 15x15mm GPS patch antenna Built-in TCXO crystal and farad capacitor for faster hot start Compass module QMC5883L integrated Specifications GPS module: GPSSAM-M8Q Frequen…

Description GPS specially designed for Defender25. Features UBLOX M10 chip Built-in farad capacitor for faster hot start Onboard LNA (Low Noise Amplifier) 10 Hz Refresh rate Built-in Flash The split antenna design enables the antenna to be hidden inside the drone Specifications Baud Rate: 4800bps-115200bps (Default – 115200bps) Sensitivity: Tracking: -167dBm Cold start: 60s Hot start: 1s Maximum height: 50000m Maximum speed: 500 m/s Speed accurac…

Features UBLOX M10 chip Compass module QMC5883L integrated Built-in farad capacitor for faster hot start Onboard LNA (Low Noise Amplifier) 10 Hz Refresh rate Built-in Flash High sensitivity 18x18mm GPS patch antenna, low power consumption, strong signal, lightweight. Specifications Compass module: QMC5883L Baud Rate: 4800bps-115200bps (Default – 115200bps) Sensitivity: Tracking: -167dBm Cold start: 26s Hot start: 1s Maximum height: 50000m Maximum spe…

The Holybro S500 V2 Kit is affordable, lightweight, simple, easy to assemble, and no soldering required. This is a complete kit that includes almost everything you need to fly. All you will need is a battery and an RC system (optional). It is perfectly compatible with various Holybro Flight Controller such as the Pixhawk4, Pixhawk4 Mini, Pix32 v5, and Durandal. This S500 frame composed of mixture of materials. The arms are made of high strength, ultra-durable Polyamide-Nylon composite material…

SKU8082 GNSS Antenna-CH3602A KEY FEATURES Supports 3 frequency bands Support GPS, Glonass, Galileo, Beidou,QZSS, and SBAS signal reception Stable phase center guarantees the accuracy of positioning within millimeter level Strong anti-interference ability to endure the harsh operating environments 25g light weight for lower power consumption IP67 ruggedized protection SKU8086 GNSS Antenna-CH7604A KEY FEATURES: Supports 3 frequency bands Support GPS, Glon…

Description: This professional-grade RM3100 compass/magnetometer has impeccable signal-to-noise ratios, no drift, and precise magnetic field measurements. It can provide professional-grade heading accuracy and orientation calculations for your vehicle. With this compass, your vehicle can navigate through waypoints with little magnetic disturbance due to motor coils and metal parts. You can achieve the best result by placing this module far away from motor coils and other metal parts, getting r…

Overview The DroneCAN H-RTK F9P is the latest differential high-precision GNSS positioning system from Holybro. It has adopted the DroneCAN protocol for communication. It provides multi-band RTK with fast convergence times and reliable performance, concurrent reception of GPS, GLONASS, Galileo and BeiDou, and a fast update rate for highly dynamic and high volume applications with centimeter-accuracy. With the adoption of the DroneCAN Protocol, it has up to an 8 Hz navigation update rate, upg…