The Ultimate Performance Stack for Precision UAV Operations

NOVA BOOST F4-AM32 Stack

About this product The T-Motor VELOX Lite F411 Stack is a budget-friendly stack that is equipped with the VELOX Lite F411 FC and the VELOX Lite V45A 3-6S BLHeliS 4-in-1 ESC. This stack is equipped with 5V 2A BEC, AT 7456E OSD chip, and an 8M black box. Suitable for 2207 and 2306 motors! Specifications T-Motor VELOX Lite F411 Flight Controller Main Control: STM32F411 Gyroscope: BM270 Black Box: 8MB OSD Chip: AT7456 BEC:5V 2A Weigh…

T-Motor is a pillar in the FPV community. Their electronics are durable. This new stack is designed for simple DJI compatibility, as well as being lighter and smaller. This tidy, easy to use stack is ready to make your next build as easy as possible! The T-Motor Velox F7 flight controller comes with an integrated Bluetooth chip, so you can adjust FC parameters by directly connecting to the Speedy Bee App in your mobile device without the computer configuration required. In addition to analog…

Description The F7 SE stack supports 8 motor outputs and can also be used on the X8 drone; it uses a 42688 gyroscope and is paired with firmware version 4.4.3 or higher to provide better stability. It is equipped with a 128 MB large-capacity black box chip, larger than the 16 MB black box of the regular F722. The F7 SE stack is equipped with T-Motor Velox motors, which can bring a more comfortable and stable flying experience.This flying tower is specially designed for the 5-inch X4 flyi…

The T-Motor Velox Cine F7+V50SE is a combination of flight controller and ESC suitable for freestyle 5-6″ drones. Velox is T-Motor’s affordable range, yet retains their high standard. The stack supports power from 3-6S Lipo batteries. At the heart of the flight controller is the F722 processor complemented by the ICM-42688P gyro, which supports a refresh rate of up to 8kHz. The board is also equipped with 16MB memory for blackbox, a barometer for altitude measurement, and TVS dio…

T-Motor’s powerful F7 Flight Controller combined with the T-Motor F55A Pro II ESC will give you optimized performance and seamless integration in your electronics stack. T-Motor F7 Flight Controller T-Motor’s first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Specifications MCU: STMF722RET6 Gyro: MPU6000 Memory: 16M Input Voltage: 12v-25-2v (3-6S) BEC: 5V/2A Dimensions: 37mm x 37mm Mounting Holes: 30.5mm x 3…

T-Motor’s powerful F7 Flight Controller combined with the F45A V2 3-6S BLHeli_32 4-in-1 ESC will give you optimized performance and seamless integration in your electronics stack. T-Motor F7 Flight Controller T-Motor’s first F7 Flight Controller has arrived! Logical layout, designed to work seamlessly with the T-Motor F45 and F55 ESC. Specifications MCU: STMF722RET6 Gyro: MPU6000 Memory: 16M Input Voltage: 12v-25-2v (3-6S) BEC: 5V/2A Dimensions: 37mm x 37mm Mounting Holes: …

The T-Motor F7 & F55A Stack now comes in a version meant specifically for the DJI Digital FPV System! Including a plug for your Air Unit and a 10V 2A BEC to power it. Specifications FC Input Voltage: 3-6S Gyro: MPU6000 Master chip: STM32F722RET6 Flash: 16MB BEC: 5V 2A, 10V 2A Mounting hole: 30.5×30.5mm Weight: 8.4g Size: 37x37mm Firmware: TMOTOR F7(Betaflight) ESC Continuous current: 4*55A BLHeli_32 32bit Burst current: 4*75A BEC Output: 10V @2.0A Size…

T-Motor F722 60A 8in1 stack , ideal for your Cinelifter. This aesthetic and practical stack is equipped with three 30x30mm slots to best fix it on your frame. Note: The stack holes are not through, 3mm maximum will be enough to hold it from below. Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it. SPECIFICATIONS MCU : STM32F722 Gyroscope : MPU6000 Wireless : Bluetooth BEC : 5V 2A, 12V 2A Voltage …

Factory Unit, Does not comes Without logo/label Key attributes compatible brand: DJI, Skydio, Others type: Drone Parts place of origin: Guangdong, China brand name: Surpass Hobby FC: F405 Flight Controller CPU: STM32F405 micro controller Gyroscope: MPU6500 Supported Firmware: Betaflight OSD ESC Current: 65A ESC Maximum current: 75A(10S) Dshot: Support Input Voltage: 2-6S …

Skystars F7+KM65 is a powerful stack for 5″ freestyle and racing drones or 7-8″ long-range drones. The flight controller with modern F7 processor has 16MB memory for blackbox and 5V/3A and 10V/3A BEC. The flight controller can be conveniently used on a drone with both digital and analog video transmission. The pads for connecting the LEDs are in the corners. The integrated barometer for altitude measurement also comes in handy. The KM65 ESC supports 3-6S battery power and current…

Key Features Power supply: 3-6S Processor: STM32F405 Blackbox: 16MB IMU: BMI270 Integrated barometer BEC: 5V@3A, 10V@2A Connector for DJI FPV Mounting holes: 30.5×30.5mm M3 (with softmount) Current sensor ESC FW: BlHeli_S Package Includes 1x FC 1x ESCs 1x Accessory Kit

The RUSH BLADE F722 Stack for analog FPV System by RUSHFPV features the RUSH BLADE F722 Analog Flight Controller and RUSH BLADE 60A 3-6S BLHeli_32 128kHz 4-in-1 ESC (Extreme Edition), which can handle up to 6S input voltage and push your FPV racer to the max. SPECIFICATIONS: RUSHFPV RUSH BLADE F722 ANALOG FLIGHT CONTROLLER MCU：STM32F722RET6 GYRO：ICM42688P BEC： INPUT 7-36V / 3-6S LIPO，OUTPUT 5V 3A OSD ：AT7456E CVBS OSD BLACKBOX ：16MB FLASH TARGET： RUSH_BLADE_F7 PORT ：8×PWM…

Product Features Hardware design based on PX4-V6 standar. Full adaptation of PX4 firmware (also providing a modified branch of 500HZ IMU rostopic). future maintenance and hardware updates. Hardware features：27mm x 29mm x 9mm Specifications MCU: STM32H743VIH6, 480MHz, 2MB Flash IMU: BMI088+BMI088(DUAL) Baro: SPL06 MicroSD Card Slot 7x UART 8x PWM 1x I2C 1x SPI 1x SWD 2x ADC (VBAT, Current) USB Type-C BEC 5V 2.5A output (for controller, receiver, GPS, optica…

The MicoAir F405v2 Flight Controller supports two popular open-source flight control firmwares – INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates are easily done through Mission Planner or INAV Configurator. Pioneering Integration of the BMI088 IMU: The MicoAir F405v2 is the first flight controller to incorporate the BMI088 IMU and be compatible with INAV firmware. This IMU is renowned for its excellent stability, high …

This iFlight Succex Micro Tower System includes the advanced SucceX Micro F4 V2.1 Flight Controller along with the SucceX Micro 15A V2 4-in-1 ESC, which can push your FPV racer to the max! Specifications SucceX Micro F4 V2.1 Pro Flight Controller STM32F411 Input voltage 2-4S LIPO Gyro: MPU6000 2x UART ports 4x motor outputs Betaflight OSD :AT7456E Blackbox FLASH: 8MB BEC 5V 2.5A cont. Size: 21mm*21mm Mounting holes distance: 16*16mm Weight: 2.5g Firmware : IFF411_…

The SucceX-E Mini F7 Stac by iFlight includes the advanced SucceX-E Mini F7 Flight Controller along with the SucceX-E Mini 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max! This stack is plug and play – meaning that no soldering is needed. You can plug this stack into your Caddx Vista, analog VTX and it comes with a universal receiver plug! FC // SucceX-E Mini F7 Features Gold-plated plug BlackBox: 8MB Vista HD Plug-and-Play. No need to s…

The SucceX-E Mini F4 Stack by iFlight includes the advanced SucceX Mini F4 Flight Controller along with the SucceX 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max. Specifications SucceX-E Mini F4 Flight Controller MCU：168MHz STM32F405 Gyro：MPU6000 Blackbox：8MB Betaflight OSD：YES BEC：5V 2.5A Uarts：5 ESC Telemetry：yes INA Pad：nuart2 Input voltage：2-6S Size:25*25mm /20*20mm φ3 mounting Weight: 4g Firmware：BETAFLIGHTF4 Moun…

FC // SucceX-E F7 Top Features: – Gold-plated plug – BlackBox: 8MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Changelog: V1.0 – V1.4: Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented. Before BMP280 changed to DPS310 Before 8MB Flash changed to 16MB Flash Specifications: – MCU: STM32F22RET6 216 MHz –…

PRODUCT DESCRIPTION FC // SucceX-E F7 Top Features: – Gold-plated plug – BlackBox: 16MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Specifications: – MCU: STM32F722 216MHz – Gyro: MPU6000 – Baro: NO – OSD: IFLIGHT OSD （AT7456E） – BEC: 5V 2.5A – BlackBox: 16MB – Uart: 4*UART(UART1、UART2、UART4、UART5) – UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry – …

SucceX-E F4 V2.1 Flight Controller features an STM32F405 MCU, MPU6000 gyro, 8MB Blackbox, 4 UARTs, 8 ESC outputs, Betaflight OSD, BMP280 barometer, VTX telemetry, WS2812 LED support, 5V/3A BEC, supports 2–6S LiPo (up to 8S max), and uses a 30.5×30.5mm mounting pattern.

PRODUCT DESCRIPTION The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. But the real magic of this flight controller lies in its TWIN GYRO configuration. The TwinG uses two identical gyros oriented side by sid…

The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. But the real magic of this flight controller lies in its TWIN GYRO configuration. The TwinG uses two identical gyros oriented side by side with one offset 90 degre…