Product description : Input 4-14S LiPo / max. 60V. Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p. Blue power “ON’ LED. 59mm x 29mm x 13mm / 26g with enclosure(without cables) Delivery in PP box: 55 x 55 x 20mm Scope of delivery: 1x 021: PL 4-14S HYB-BEC / 1x 5.3V / 3A 1x 040: PL – Series sensor cable / L=15…

200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-200U. This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc. The voltage reading of the LiPo is optimised for up to 6S LiPo packs. The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in…

100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400) Without CFK enclosure = 27.5 x 19.5 x 10.5m…

50A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400) Without CFK enclosure = 27.5 x 19…