12.9 Grade Black Nickel Plated Countersunk Head Screw
₹8
iFlight BLITZ Whoop F7 AIO
₹13699
Features of BLITZ Whoop F7 AIO Separated Flight Control board to minimize electrical gyro noise Pass-through DJI O3 and Caddx Vista/Polar Connector FC PCB can be disassembled from the ESC PCB; Repair allowed! MCU: BGA-STM32F745, 216MHz OSD: AT7456E Blackbox: 16MB Onboard Flash Gyro: ICM42688 Changelog December 26, 2023
: The gyro was changed from BMI270 to ICM42688. FC Specifications MCU: BGA-STM32F745 Gyro: ICM42688 Blackbox: 16MB Onboard Flash BEC …
Features of BLITZ Whoop F7 AIO
Separated Flight Control board to minimize electrical gyro noise
Pass-through DJI O3 and Caddx Vista/Polar Connector
FC PCB can be disassembled from the ESC PCB; Repair allowed!
MCU: BGA-STM32F745, 216MHz
OSD: AT7456E
Blackbox: 16MB Onboard Flash
Gyro: ICM42688
Changelog
December 26, 2023: The gyro was changed from BMI270 to ICM42688.
FC Specifications
MCU: BGA-STM32F745
Gyro: ICM42688
Blackbox: 16MB Onboard Flash
BEC output: 5V 2.5A
WS2812 LED Strip: Yes
Buzzer: Yes
Barometer: DPS310
Connector: Micro-USB
OSD: IFLIGHT OSD (AT745E）
FC Firmware：IFLIGHT_BLITZ_F7_AIO
Mounting pattern: 25.5*25.5mm φ3mm
Dimensions: 35*35mm
Weight: 10.5g
BEC: 5V 2A / 3A
Input voltage: 2-6S, support LIHV battery
Smartaudio / IRC Tramp VTX protocol supported
ESC Specifications
ESC MCU: BB21
Driver: FD6288
Input voltage: 2-6S Support LIHV battery
Output current: 55A, peak value 65A (10 seconds)
ESC firmware: Q-H-40 – Bluejay, 0.16, 24kHz
Current sensor: ratio 200 (1/10mV/A)
BEC: NO
ESC Telemetry: NO
Bidirectional DShot: Yes(need to use Bluejay firmware)
Supports DShot DShot150/300/600/MultiShot/ OneShot etc.
Packing List
1 x BLITZ Whoop F7 AIO
2 x Capacitor 470uF/35V
1 x XT30U Male 18AWG cable 70mm
1 x 1.0-7P cable 50mm-28mm
1 x 1.0-7P cable 50mm
4 x M2 silicon grommets
8 x M2*12mm screws
8 x M2 Transparent Nylon Nut
10 x 0.8mm black Heat shrink tube 10mm
Similar Products
