New version 2 brings new on/off buttons for much easier receiver binding! The ultimate Smoke Stopper from VILFY! Not quite as small as the XT30 or XT60 only version, but this one will replace both of those and gives more robust features! Features Completely cut off the current flow and prevent “magic smoke” For other smoke stoppers like the automotive light-bulb or resettable fuse, they just limit not stop the current flow, the leakage current may still damage your components. VIFLY Shor…

The Toolkit WM150 Watt Meter is the essential tool for all your electric flight! It features a 1.0-50.V power supply, supports PWM signal and 2.4-inch color screen display. Features ToolkitRC WM150 is a Watt Meter, which is capable to test voltage, power, current data of the electric equipment, like a servo, ESC, battery, etc. 1-50V power supply, the max current is up to 150A, the precision is accurate to 10mA. Support PWM signal, 1us precision, the pulse width is changeable by adjusti…

A USB-C to XT60 power cable for use with battery chargers. Capable of up to 20V DC and 5 Amps output power, depending on the Type-C power source you connect it to. Specifications Input: USB-C 5.0-20.0V @PD2.0 PD3.0 QC2.0 Input current: MAX 5A Output voltage: 5.0-20.0V Output current: MAX 5.0A Connector: USB-C to XT60 Length: 50mm Weight: 35g Work temp: -10 – 40°C Includes 1x Toolkit RC SC100 USB-C to XT60 Adapter Cable USB-C Power Supply Not Included.

The latest from Toolkit is a feature packed multi purpose cell checker with a big, bright, easy to read display. Not only can you check cell voltages and balance your packs, you can also monitor the PWM/PPM/SBUS output of receivers, generate PWM output to test servos and ESC’s, and use your LiPos for device charging (up to 20W PD)! Check the video below to see what it can do! Features Large Color Screen Battery Status Display PWM/PPM/SBUS Readout PWM Output One Touch Battery Balan…

Charge Cable w/ Male XT60 4mm Banana plug 30cm is the cable you can use to power your Charger Using A Dc Power Source Such As A Power Supply Or A 12 V Car Battery. The End With The Xt60 Male Plug Connects To Your Charger (Confirm That Your Charger Has An Xt60 Female Plug). The Other End Has 4mm Male Bullets So You Can Connect Them To Your Power Supply Or To Alligator Clips W/ 4mm Bullets In Them (Gtp1340). The main charge leads are constructed from the highest quality materials to ensure tha…

Dimensions 60.9 × 26.3 × 13 mm

Super grippy, sticky battery pads for different size quads (cut to your own size). SPECIFICATION Size (LWH): 100 x 50 x 2.5 (mm) Grippiness: Super INCLUDES 3 x Anti-slip battery pads of identical size with double-sided stickytape backing.

XT30/ XT60 Smoke Stopper ,Every quad/drone owner should have one. A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short somewhere, the smoke stopper can limit the current flow and prevent “magic smoke”It saves your electronic components from current surges, and gives you a chance to troubleshoot the failure without having to replace the burnt-out parts. The LED indicator turns solid green in normal si…

The BD380 Battery Discharger and Analyzer is a powerful, versatile battery tester and discharger designed for RC enthusiasts. With a 1.77-inch display and a wide range of operating modes, it supports DC input voltages from 3V to 30V and offers discharge power up to 380W. Featuring CC, CR, CP, and CV modes, it ensures accurate and reliable testing for various battery types. The BD380 Battery Discharger and Analyzer comes with XT60 connector and adjustable discharge rates (0.3A to 40.0A) provide f…

The 8V-32V Fast Charging Module with PD3.1 technology is designed specifically for Standard applications. It provides 65W of fast charging power, ideal for powering and charging USB-C devices like smartphones, laptops, and tablets. With an input voltage range of 8V to 32V, this module is compatible with a variety of power sources such as car batteries, solar panels, and DC adapters, making it perfect for automotive, solar, and DIY projects. Features: PD 3.1 Fast Charging: Supports Power …

PCB BMS 6 Series 22V 18650 Lithium Battery Protection Board is a 6 string 22V circuit power tools mostly used for solar lighting, for dedicated 18650 battery packs. It is designed for 3.7V 18650 models lithium batteries for charging, Protection from overcharge and over-discharge. Battery protection board, as the name suggests battery protection board is mainly rechargeable (Refers to the lithium battery) and protects the integrated circuit board. Lithium battery (rechargeable type) so need …

The LiPo Battery Voltage Checker 1S-8S with Buzzer is a quality product available and a special design to measure and display the voltage of LiPo battery packs. This voltage checker can measure the voltage of the battery pack as well as the voltage of every single cell of the battery pack. This unit also features a handy built-in LED display that will show the voltage of each cell followed by the overall voltage of the pack. Don’t risk your model by flying on depleted batteries, at this pric…

Smart Battery Checker with 260,000 color display visible under strong sunlight. Exquisite and powerful BG-8S smart battery checker. Fully support BattGO technology. Specifications Working voltage : 5.0V-36V Input voltage 1s : 0.8V-15V Input voltage 2-8S : 0.8V-4.8V Battery cells : 1-8S Voltage measurement accuracy : ±0.005V @ 4.2V Balancing cells accuracy : < 0.005V Support USB charging : QC 2.0 / 3.0, BC1.2, Maximum output 12V/2A Support smart battery : Charging and discha…

Description A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short somewhere, the smoke stopper can limit the current flow and prevent “magic smoke” It saves your electronic components from current surges, and gives you a chance to troubleshoot the failure without having to replace the burnt-out parts. The LED indicator will be green when the current is within 1.2A. The LED indicator turns off and…

iFlight XT30/ XT60 Smoke Stopper ,Every quad/drone owner should have one. A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short somewhere, the smoke stopper can limit the current flow and prevent “magic smoke”It saves your electronic components from current surges, and gives you a chance to troubleshoot the failure without having to replace the burnt-out parts. The LED indicator turns solid green in n…

Description The PD100W multifunctional adapter is designed for charging electronic devices such as smartphones and laptops. It supports PD100W output and various charging protocols for versatile compatibility. With features like automatic shut-off at low voltage and a vibrant TFT display, this adapter ensures efficient and safe charging for all your devices. Features Adjustable cutoff voltage support – Input over-voltage protection – Input under-voltage protection – Output …

Description Crash Protected Quick-Release Battery New innovative quick release battery and charging adapter to make everything as easy as it can be. The Defender25 comes with a stock 4S 550mAh. Endurance 900mAh battery optional. Package included 1 x Defender 25 Charge Adapter 1 x XT30 Cable 1 x XT30 to XT60 adapter cable

Description Introducing our advanced charger, designed specifically for 1S LIHV 4.35V battery types. This charger features a single-channel output with a charging current of 1000mA and supports simultaneous charging of up to six batteries. Experience efficient and rapid charging with our cutting-edge technology! Features Equipped with high-efficiency synchronous buck charging ICs, achieving up to 94% charging efficiency. Compared to linear charging, it delivers faster charging wi…

1x XT30 male to XT60 female connector.

Specification: Input voltage: USBC 5V-20VInput current: Max 5AOut voltage: USBC 5V-20VOnput current: Max 5APlug: XT60Support: PD2.0/PD3.0/QC2.0Weight: 50g Packaging included: 1XHOTA PC100 Type-C Charger Cable

This is a spare replacement LCD screen for the HOTA D6 and D6 Pro charger. Please be careful when you try to replace it on your charger. No warranties.

PM02 is a simple way of providing your APM and Pix32 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.2V and a maximum of 3A from up to a 12S LiPo battery. The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection. The Power Module is designed to power APM,Pix32, a RC receiver and APM accessories (GPS, radio). It is not de…

High Quality sticky battery pad for your LiPo Batteries. This durable battery pads made from PU material can stick to a battery at 90° on its side and even rotate 180° without falling! Specifications Weight: 16g each Dimensions: 10x5x0.2cm Includes 3 x Flywoo Ultra Grip Fpv battery Pad

Features: 100% brand new To test all different kinds of batteries (AA, AAA, C, D, 9V, mini cell) Check the power level of all 1.5V, 9V, and 1.5V miniature cells Can quickly test the capacity of your battery Easy-to-read, digit indicates power level Test multiple sizes of batteries in one unit. (1.5V: AAA, HP16, MN2400, R03, AA, HP7, MN1500, UM3, C, HP11, MN1400, SP11, LR14, UM2, D, HP2, MN1300, SP2, R20, UM1; 9V: PP3, MN1604, 6F22, 006P) Specification: Battery Size: 1.5V | 9V G…