About this product Upper and lower replacement Japanese EZO bearings for the F40 and F60 PROII motors. Includes 1x EZO Bearing

The T-Motor Cinematic F30A 6S BLHeli32 4-in-1 ESC is loaded with lots of power! The Cinematic F30A 4-in-1 ESC comes with high-performance 32-BIT main control and supports mainstream throttle signals like DSHOT150/DSHOT300, DSHOT600, PROSHOT1000. Compatible with Oneshot125, Oneshot42, Multishot, and common PWN signals. Paired with T-Motor Light F4 20×20 Flight Controller for a better flying experience! Specifications Input Voltage: 2-6S Lipo Constant Current: 30A Peak Current: 40A …

T-Motor F722 60A 8in1 stack , ideal for your Cinelifter. This aesthetic and practical stack is equipped with three 30x30mm slots to best fix it on your frame. Note: The stack holes are not through, 3mm maximum will be enough to hold it from below. Upon receiving your FC,please connect to USB and calibrate before continuing to build and solder to it. SPECIFICATIONS MCU : STM32F722 Gyroscope : MPU6000 Wireless : Bluetooth BEC : 5V 2A, 12V 2A Voltage …

These T-Motor C9.5×5 9.5″ Cinematic Tri-Blade Carbon Fiber Nylon Propellers offer an efficient and powerful performance, thanks to their lightweight carbon fiber nylon blades and specially designed for increased thrust. These propellers provide faster response times, smoother flight, and greater durability, making them perfect for aerial photography and professional drone pilots. SPECIFICATIONS: Length: 9.5 inch Pitch: 5 inch Blades: 3 Shaft Hole: 5mm Center Thickness: 8.6mm …

These T-Motor C8.5×5 8.5″ Cinematic Tri-Blade Carbon Fiber Nylon Propellers offer an efficient and powerful performance, thanks to their lightweight carbon fiber nylon blades and specially designed for increased thrust. These propellers provide faster response times, smoother flight, and greater durability, making them perfect for aerial photography and professional drone pilots. SPECIFICATIONS: Length: 8.5 inch Pitch: 5 inch Blades: 3 Shaft Hole: 5mm Center Thickness: 8.6mm …

This Battery strap by T-motor is designed with Safety and style in mind! Gone are the days when your battery will be ejected, with this secure, tight strap, your battery will be staying in place! Dimensions: 25x2cm Includes: 2x T-Motor Kevlar Battery Strap

Selling Point: Take your drone to new heights with the TMotor AM670 Combo, featuring high-quality motors and a reliable electronic speed controller for unparalleled performance and efficiency. Whether you’re into freestyle flying, racing, or aerial photography, this combo is designed to deliver the power and control you need to take on any challenge. With its advanced technology and durable construction, the TMotor AM670 Combo is the perfect choice for serious drone enthusiasts looking to push t…

About T-MOTOR ALPHA 60A 12S V1.2 Multi-Rotor Drone FOC ESC T-MOTOR Alpha 60A 12S V1.2 ESC delivers precise, efficient motor control with FOC technology. It features low noise, fast response, high efficiency, and built-in protections, making it ideal for professional UAVs. Specify your motor type for compatibility. ALPHA 60A 12S V1.2 ESC Highlights: 1. Low Noise 2. Temperature and Interference 3. Fast Response 4. High Efficiency 5. For Compatibility 6. Please Leave A Note …

The T-Motor 40A AIR Multirotor ESC is compatible with various flight-control systems and supports a signal frequency of up to 621 Hz. It has a special core program for multi-rotor controllers that greatly improves throttle response and specially optimized software for excellent compatibility with disc-type motors. The twisted-pair design of the throttle signal cable effectively reduces the crosstalk produced in signal transmission and makes flight more stable. All settings except the timing ar…

Package includes : 1 x 4D Adapter for Am40

Unbreakable Battery straps with closed metal buckle, made of nylon. The TBS battery straps are a great accessory for your multi rotor platforms. Coated with rubber at the bottom, it holds your batteries securely and allows easy removal when needed. The bond between the rubber and the LiPo is so strong that you do not need an additional hook and loop adhesive for securing the LiPo battery to the frame. To release, simply loosen the straps and gently slide the LiPo out.

Factory Unit, Does not comes Without logo/label Key attributes compatible brand: DJI, Skydio, Others type: Drone Parts place of origin: Guangdong, China brand name: Surpass Hobby FC: F405 Flight Controller CPU: STM32F405 micro controller Gyroscope: MPU6500 Supported Firmware: Betaflight OSD ESC Current: 65A ESC Maximum current: 75A(10S) Dshot: Support Input Voltage: 2-6S …

The SURPASS HOBBY – 6KG S0600M Servo is a high-performance, reliable servo designed for demanding hobby applications such as RC cars, trucks, boats, and robots. With a 6 kgf.cm torque, it provides impressive power and precise control, making it ideal for tasks that require strength and accuracy. Operating within a voltage range of 4.8V to 6V, it offers fast response times and smooth, consistent movement. Built with durable materials, the servo ensures long-lasting reliability, making it an exc…

Description Sunnysky V series of motors are specially designed power for long-endurance multirotor aircraft. Designing style of the whole series are high efficiency, stable stable structure, light weight, high consistency etc.. These flat V series motors are designed for long flight time multirotors. These motors can produce enough torque at low RPM and work at peak efficiency during flight. The whole series uses Sunnysky patented Stepped and knurled design that not only efficiently prev…

Sunnysky V series of motors are specially designed power for long-endurance multirotor aircraft. Designing style of the whole series are high efficiency, stable stable structure, light weight, high consistency etc.. These flat V series motors are designed for long flight time multirotors. These motors can produce enough torque at low RPM and work at peak efficiency during flight. The whole series uses Sunnysky patented Stepped and knurled design that not only efficiently prevent motors from ge…

Specifications: Stator Diameter ………. 22 mm Stator Height…………….16 mm Outside Diameter ……..28 mm Body Length …………….32 mm Shaft Diameter …………3.17 mm Motor Weight ……………68 g Accesory Weight……….13 g

Specifications: Name: Sunnylife TD78 Head Strap Model: FV-TD78 Applicable models: for DJI FPV Goggles V2 Material: Plastic + Memory Foam Net weight: 137g Gross Weight: 333g Packing size: 230*186*120mm

PRODUCT DESCRIPTION Small size but big power! The iFlight Micro Force is the VTX you need for your next Micro build. Small enough to fit into smallest frames, but enough power to get some signal through some of those dense trees. Switchable from 25mW up to 300mW with excellent Power output stability. PIT mode also allows you to power up your quad with pilots nearby without stomping on their frequency. Tips: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or …

The SucceX Micro F4 2-4S V2.1 Flight Controller is a compact, lightweight flight controller designed for FPV racing drones. It features a powerful STM32F411CEU6 microcontroller, an MPU6000 gyro, and two UART ports for connecting peripherals. The flight controller also has a built-in Betaflight OSD and an 8MB Blackbox for recording flight data. Mounting: 16×16 Weight:2.5g Dimensions:21mm x 21mm Blackbox: 8MB OSD: Betaflight OSD Gyro: MPU6000 UART ports: 2

PRODUCT DESCRIPTION Features: – Stable output power – 5 Power levels up to 800mW; – 48 Channels (including Raceband) – Fast frequency lock, no startup interference with other pilots – Built-in output power self-check functionality – VTX telemetry with IRC Tramp protocol Tips: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX t…

TOP FEATURES: Power supply: 1S Super light only 4.8g MCU：STM32F411 Gyro: MPU6000 Support BLHeliSuite programmable 5A continuous current Built-in VTX Built-in D8 Receiver FC // SucceX-1S Whoop AIO Board Size：29*29mm Mounting pattern: 25.5*25.5mm/φ3mm （half-hole) Connector：Micro-USB Weight: 4.8g (with power cable, VTX, and VTX antenna) MCU：STM32F411 Gyro：MPU6000 Blackbox：no BEC output：5V 1.2A INA pad：n uart2 Barometer：no FC Firmware：MatekF411RX NOTE: …

Features: 1. Compact yet powerful, up to 1600mW for clear long-range video 2. Four adjustable power levels 3. Rugged CNC aluminum shell for added durability and superior heat dissipation 4. Temperature control protection function prevents burns from overheating 5. Wide voltage input supports 7V-36V voltage input 6. Supports 48 transmission channels 7. VTX control protocol IRC Tramp supports OSD parameter adjustment 8. Built-in microphone for real-time audio transmission 9. One function …

Peculiarity： The length is adjustable, and the magnetic quick-release buckle design is used to ensure the connection strength without taking into account the characteristics of quick disassembly and installation

Redfox A3 35A/45A ESC AIO Flight Controller for 2 to 3.5-inch drones Introducing the Redfox A3 series flight controller, a new choice in lightweight FPV drones brought to you by the Sub250 team. Designed specifically for 2 to 3.5-inch drones, it integrates the powerful computational capabilities of the F722 MCU to ensure exceptional flight performance. Featuring an independently designed Type-C adapter board, it can be conveniently placed at any location on the frame for quick parameter adju…