Product Description The Fullsend Lipo batteries offer the best bang for your buck! These batteries have an awesome performance with 120C discharge capability and cost a fraction of most other batteries on the market. High-quality cells ensure even delivery of power with minimal voltage sag under heavy loads. Each Fullsend battery is individually QC checked at the factory, ensuring you get the best performing battery out of the box. The Fuulsend battery design features an all black shrink cov…

rSky XM+ Receivers are now coming installed with ACCST 2.0 firmware. This is not compatible with ACCST 1.0 controllers and firmware updates will be required if there is a firmware mismatch. Firmware can be found here: https://www.frsky-rc.com/xm-plus-mini-sbus-non-telemetry-full-range/ (Select history firmware download for ACCST 1.0 firmware) FrSky XM+ Ultra Mini SBUS Receiver , ONLY 1.6g Specification Dimension : 21.5x12x3.5mm(LxWxH) Weight : 1.6g Number of Channels : Up to 16CH f…

The X8R is in a smaller package than the previous 8 channel receivers but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors. The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second. Th…

The X7S ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers. The battery compartment now uses 2 18650 Li-Ion batteries and can be balance charged via the Mini USB interface. The X7S ACCESS version features Hall-sensor gimbals and the PARA wi…

1 replacement IPEX antenna. Fits the latest FrSky R-XSR, X4RSB and S6R receivers. Note: FrSKY has changed the antenna plug on the latest X4RSB and S6R Receivers and this is the replacement antenna. Specifications Length: 10/15cm (Choose the length) Connector Height: 1mm Connector Width: 2.1mm

Description: The multirotor may crash, sometimes it will break the antenna of the receiver, the antenna outer covering will be damaged or directly broken, which will affect the radio link. Continue to use the broken antenna will have the risk of losing your quad. Use our replace antenna, just need to unplug your old antenna and plug in the new ones, no need soldering. 150mm standard length. Precision machining, low loss signal stability. High sensitivity, high quality, RG-113 silver plat…

Frsky R-XSR receivers are now coming installed with ACCESS firmware. To bind with ACCST only radios, a firmware update is required. Firmware can be found here: https://www.frsky-rc.com/r-xsr/ (Select history firmware download for ACCST 1.0 firmware) The FrSky ultra mini receiver R-XSR is the evolution of the popular full range XSR receiver. The R-XSR is a standalone receiver with all the functionality of the full size XSR (including telemetry), but at 1/3 size and weight of XSR receiver.…

1.Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal. 2. Compact design allows easy one-handed operation. Self-cleaning shaft allows high productivity of continual work without clogging. 3. Withstands direct contact with soldering iron (350C Max). 4. Highest quality construction & components. High-powered. 5. Low maintenance cost, owing to spare tube, only required for replacement. Detailed Images…

Brandan FPV has formulated the perfect solution to your environmental worries. The Brandan FPV Worry-Free Waterproof Coating Kit has everything you need for application and is designed to protect your FPV electronics from moisture exposure! Flying in fair weather is always preferred but sometimes the perfect circumstance isn’t always reality. Ease your worries and apply Worry-Free conformal coating to your FPV electronics to ensure your flights are never interrupted by inclement weather or hi…

Brandan FPV has formulated the perfect solution to your environmental worries! The Brandan FPV Worry Free Waterproof Coating Kit has everything you need for application and is designed to protect your FPV electronics from moisture exposure! Flying in fair weather is always preferred but sometimes the perfect circumstance isn’t always reality. Ease your worries and apply Worry Free conformal coating to your FPV electronics to ensure your flights are never interrupted by inclement weather or …

Name Reaper Nano Input Voltage 5V Output Voltage 5V Channels 40CH Power 25mW/100mW/200mW/350mW Weight <1g Size 12*16mm Consumption 340mA @ 350mW Band CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 Band A 5865 5845 5825 5805 5785 5765 5745 5725 Band B 5733 5752 5771 5790 5809 5828 5847 5866 Band E 5705 5685 5665 5645 5885 5905 5925 5945 Band F 5740…

The Foxeer Reaper Mini BL32 4-in-1 ESC is designed to plug n play with the Foxeer F722 Mini FC, giving you a super low-profile stack for your build that is also lightweight. Features Easy to use with other FC’s with the large and spacious solder pads. 45A Specifications Input Signal: DShot 150/ 300/ 600/ 1200/ MultiShot/ OneShot etc. Firmware: Foxeer_Reaper_Mini_4in1_45_Multi_Version Input Voltage: DC 10V~26.2V (3-6S Lipo) Dimensions: 40.5mm x 33mm x 5.5mm Mounting Patt…

Firmware FOXEER_ReaperM4IN1_F4_60A_128_Multi_32_9 Continuous /Burst Current 60A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Current Scaling 70 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -20℃ ~ +70℃ Mounting Hole 20×20mm, Φ4mm/ M3 Dimension 40.5×40×5.…

Firmware FOXEER_ReaperM4IN1_F4_45A_128_Multi_32_9 Continuous /Burst Current 45A*4 / 65A*4 Input Voltage DC 10V~26.2V (3-6S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Current Scaling 115 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -20℃ ~ +70℃ Mounting Hole 20×20mm, Φ4mm/ M3 Dimension 40.5×33…

Firmware FOXEER_Reaper4IN1_F4_65A_128_Multi_32_9 Continuous /Burst Current 65A*4 / 100A*4 Input Voltage DC 9V~40V (3-8S Lipo) BEC No Telemetry Supported ESC Programming BLHeli32 Current Scaling 70 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Storage Temperature -20℃ ~ +70℃ Mounting Hole 30.5X30.5mm,Φ4mm/M3 Dimension 42.5x42x5…

Model FOXEER Reaper AIO V3 CPU STM32F745 Power Supply 2~6S Lipo(8.4~25.2V) BEC Output DC5V/2.5A OSD BF OSD Black Box 16M Flash Memory UART 5 Set USB Micro USB Fireware BF:FOXE-FOXEERF745V3_AIO; Inav: FOXEERF745AIO V3 DJI/Vista Connector Supported, 7pin Size 32.5X32.5mm Mounting Hole 25.5X25.5mm,Φ3mm/M2 Weight(g) 8.9g Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Stora…

Firmware FOXEER_Reaper_F4_80A_128_Multi_32_9 Continuous /Burst Current 80A/ 145A Peak Power Rating (kW) 4 Continuous Rating Duration (s) 65 Burst Rating Time (s) 6 Input Voltage DC 14V~36V (4-8S Lipo) BEC No Current No Telemetry Supported ESC Programming BLHeli32 Input Signal DShot 150/ 300/ 600/ 1200 /MultiShot/ OneShot etc. Working Temperature -20℃ ~ +65℃ Working Humidity 20～95% Storage Temp…

Attention: It is IMPORTANT!! This 1.8mm lens can only be replaced by the arrow micro camera which has 1.8mm lens already, can NOT be used by the camera with 2.1mm lens. Support: Micro Falkor Cam / Micro Arrow Cam / Nano Toothless Standard Version / Micro Razer / Nano Razer

Package includes: 1X Foxeer Mini/Micro Cat 2/3 M12 2.1mm Low Light Lens

Description Specifications Q & A Reviews Model Mini F722 V4 Pro CPU STM32F722RET6 Power Supply 2~6S Lipo (6.5V~30V) BEC Output DC5V/3A OSD BF OSD Black Box 16M Flash Memory UART 4 Set ESC Telemetry RX4 Buzzer YES Smart Audio YES LED 1 Set 2812 LED USB Micro USB Firmware FOXEERF722V4 Size 28.5*28.5mm Mounting Hole 20X20mm,Φ4mm …

The F722 Pro V2 is a 20×20 flight controller flown by professional FPV racer BMS. This FC has a built-in passthrough to make wiring up your quad easier. Specifications CPU STM32F722RET6 Power Supply 2~6S Lipo (6.5V~30V) BEC Output DC5V/3A OSD BF OSD Black Box 16M Flash Memory UART 4 Set ESC Telemetry RX4 Buzzer YES Smart Audio YES LED 1 Set 2812 LED USB Micro USB Fireware FOXEERF722V2(FOXE) Size 28.5*28.5mm Mounting Hole 20X20mm, Φ4mm Weight(g) 4.4g Working Te…

The Mini F722 V2 Flight Controller by Foxeer features the latest F7 processing technology, STM32F722RET6, MPU6000 Gyro, and many other specs that make this 20×20 FC a winner! Specifications Model: Mini F722 V2 CPU: STM32F722RET6 Power Supply: 2~6S Lipo (6.5V~30V) BEC Output: DC5V/2A OSD: BF OSD Black Box: 16M Flash Memory UART: 4 Set ESC Telemetry: RX4 Buzzer: YES Smart Audio: YES LED: 1 Set 2812 LED USB: Micro USB Fireware: FOXEERF722V2(FOXE) Size: 26X26mm Moun…

Material Toray T700 carbon Wheelbase 305mm Middle Mouting Hole 30.5×30.5mm Rear Mouting Hole 20×20/25.5*25.5/30.5×30.5mm Camera Size 19×19/20x20mm Supported System O3/Analog/Vista/Walksnail/HDZero Weight 221g (Excluded TPU) Packing List 5.5mm Arm 16~19mm Mounting – 4 2.5mm Top Plate – 1 2.5mm Middle Plate – 1 4mm Balance Pole – 2 2.5mm Bottom Plate – 1 5.5mm Holder – 1 CNC Side Plate – 2 Alumi…

1 x Foxeer Mega arm