BETAFPV Micro receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. A ton of ExpressLRS items are available now! ExpressLRS PWM Receivers ExpressLRS now supports direct PWM output from receivers that have been specifically designed for this mode. BETAF…

Please note, ELRS is a new open source project so please only order this if you are comfortable with regular firmware updates as the firmware is still in beta. We will only be able to offer limited support due to the early nature of the firmware, but we think this project has great potential. BetaFPV Nano RX or Lite RX Nano receiver (2.4G version) is the first and (so far) the only receiver with power amplifier (PA+LNA). It has 100mW telemetry output and better sensitivity when longer …

BETAFPV Lite receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. NANO RX OR LITE RX What is the major difference between Nano receiver and Lite receiver? Nano receiver (2.4G version) is the first and (so far) the only receiver with power amplifier (PA+…

The BETAFPV ELRS 2.4GHz Micro TX Module (1W Version) supports all 5D button dimensions based on BETAFPV ELRS V2.0.0 firmware. A new backpack function has been added, allowing wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying configuration. Compared with 500mW versions, this not only has a built-in cooling fan, but also the features a heat sink! This module can work properly in daily use and not need to worry about temperature. …

The BETAFPV BT2.0 450mAh 1S 30C HV Battery is made to fit 1S tiny whoop drones! After BT2.0 300mAh 1S battery, BT2.0 450mAh 1S battery is following close at its heels. As the first 450mAh 1S battery with BT2.0 connector in the current market, it has an exclusive designed BT2.0 connector, which has broken through the bottle-neck of PH2.0 crappy crimped pins. What’s more, it is highly recommended for Emax Tinyhawk, which achieved dynamic balance, longer flight time and better performance, just n…

BT2.0 Connector – the most significant revolution in 1S Tiny Whoop Drone. Since February 2019, we’ve got some feedback on Facebook about how eager they need the high quality of solid pins connector on 1S whoop drone. So we started our long-term investigation on the design of the solid pins and the stable manufacturing technique to meet pilots’ demand. Betafpv always keeps moving forward with a passion for breakthrough experiences. Now Betafpv exclusive designed BT2.0 connector 1S battery has…

Description Budget video receiver BAYCK STARFISH D1 5.8G for 48 channels with sensitivity up to -98dbm. This VRX model is compatible with Fatshark and Skyzone type goggles. Detailed product specifications can be found below. Features Video receiver sensitivity: -98dbm Compatible with: Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO, HDO2 Skyzone 04L,04X Features Model: STARFISH D1 Microcontroller: ESP32 Display: 0.96-inch TFT/LCD RF sensitivity: -98dbm …

Description: BAYCKRC C3 900/2400 Dual Band Nano RX is based on the ExpressLRS open source system and uses Semtech’s third-generation wireless communication chip LR1121, which realizes single-antenna 868Mhz/900Mhz/2.4Ghz frequency switching and 100mw return power at three frequencies. We also use a temperature compensated crystal oscillator (TCXO) through precise temperature compensation technology to effectively solve the frequency drift problem of the crystal oscillator under different tempera…

Model: BAYCKRC 900/2400 Dual Band Gemini Rx Name: ExpressLRS Receiver RF Frequency: 900Mhz/2.4Ghz Antenna type: T type IC:LR1121+ESP32 PICO+TCXO Color: Blue TX power: 2*100mW Input power: 3.6V-5.5V Connector: IPEX 1 Size: 27mm × 16mm Weight: 1.8 grams (without antenna)

Description Budget video receiver BAYCK STARFISH D1 5.8G for 48 channels with sensitivity up to -98dbm. This VRX model is compatible with Fatshark and Skyzone type goggles. Detailed product specifications can be found below. Features Video receiver sensitivity: -98dbm Compatible with: Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO, HDO2 Skyzone 04L,04X Features Model: STARFISH D1 Microcontroller: ESP32 Display: 0.96-inch TFT/LCD RF sensitivity: -98dbm …

Fireproof battery organizer storage box is made of high quality non-itchy silicone coated fiberglass which stands up the temperature up to 2000℉. Fireproof materials will keep your batteries 100% safe. We designed this fireproof battery box to minimize the danger and loss caused by battery explosion.(The cut foam is retained inside,so it may take some time to remove it,but it won’t deform the internal foam,which is why we designed this approach) For more type batteries: 12.6*8.7*4 inches size. …

Balance Lead Replacement Cable (2S/3S/4S/5S/6S/8S JST-XH) Have you had a bad crash and a prop broke your balance wire? Well worry no more, this cable is used to replace the JST-XH style balance plug on a Li-Po battery for charging purposes. Pro-tip, cut and solder one wire at a time to avoid shorts. Use shrink wrap to keep wires from touching and your pack looking clean. This cable is 15cm long and uses high-quality 22 AWG silicone insulated wire. That is a bit long for most uses so be sur…

Axl PDB is designed for precision power supply needs of an electronic system requiring 48V input while providing stable and regulated 12V and 5V outputs. It has a four XT90 connectors for 15-48V power transfer from battery to ESC/Motor up to 200A. It also has an integrated current sensors for measuring the current up to 200A and voltage up to 60V. Features: Capable of handle high current (up to 200A). Anti spark soft switching for inductive loads. Input voltage up to 15-48V (12…

PDB details 1. Compatible up to Octa copter configuration. 2. FMU PWM OUT. 3. I/O PWM OUT. 4. Can connect 1-8 ESC. 5. It can handle up to 100 Amps. 6. Circle shape with a 35 mm radius. 7. Weight: 17 gm. 8. Material: glass fiber The 100A ESC Power Distribution Board For drones is a lightweight distribution board that will easily power your multi-rotor aircraft and configures up to Octa. These boards are great for smaller multirotor builds. They’re compact and lightweight and offer larg…

Why do we recommend you wear arm guards when flying drones outdoors? The sun protection arm guards use the latest UPF technology to block 98% of harmful UVA and UVB rays, providing you with the best UV protection. No more greasy sunscreen or long shirts in the summer. When you have to go out to fly your drone on hot summer days, our cool arm guards with innovative cooling technology can help you. It provides excellent breathability and comfort by absorbing sweat and perspiration, keeping your…

Type: ROCK Frequency: 5.8G,5 frequency groups, 40 frequencies Antenna interface: MMCX Output Power: 25mw,400mw,800mw,1.5w,2.5W Input power: 7-28 V DC Current: 600mA@12VDC@2W Adjustability: Buttons/via OSD Dimensions: 41.7*27.6*14mm Weight: 23g Mounting: 20*20mm ②M2

*Function – The M80Q GPS with GLONASS, Galileo, QZSS and SBAS receiver technology and built-in micro patch antenna. For your UAV systems, Robots, RC, FPV or other projects. Electronic compass IST8310 integrated. – Industry leading -166 dBm navigation sensitivity – Navigation update rate up to 18 Hz, default 1Hz – Cold starts: 27s – 72 Searching Channels – Data Protocol: NEMA, UBX – Support Rate: 4800bps-921600bps, default 38400bps – Rechargeable 3V lithium backup battery – Powe…

About this product The Axisflying ELRS Radio Receiver is a radio receiver based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. Featuring a 2.4Ghz frequency, this receiver connects well with the Thor TX Pro Micro Module. Features 2.4GHz Frequency IPEX Connec…