This Skystars kit consists of 4 bars each equipped with 4 2812 RGB LEDs . These race wire LEDs have two functions: – Race wire only (motor supply via external pads). – LED by adding three other wires (inner pads) to power and assign the LED colors. You can use Race wire alone or Race wire + LED. Specifications Size: 33*8*2.5mm Weight: 1.12g PCB voltage: max 25V (6S) LED voltage: 5V Included 4x Power LED board 1x Wire set

Skystars Koko 2275 1950Kv is a quality motor at an affordable price suitable for 5″ racing and freestyle drones. Like other high-end motors, the Koko 2275 uses N52H round magnets , NMB 9x4x4mm bearings or a hollow titanium alloy shaft and has a unibell design. The motor is a 2207.5 size and will provide a little extra power over the classic 2207. The motor should be combined with a 5″ propeller and a 6S battery. Key Features Size: 2207.5 Kv: 1950 Shaft diameter: 5mm …

Skystars KM65 65A F4 4in1 ESC The Skystars KM65 65A 4in1 ESC is a BLHeli32 4in1 ESC with fast F4 processor and 128KHz refresh rate. The KM65 supports upto 65A constant current and a very high 90A burst current. The flight controller is 30.5×30.5mm M3 mounting. The included metal heat sink helps with heat dissipation. The ESC runs BLHeli_32 firmware and has an F4 processor. The ESC is rated at 3-6S. Specifications of Skystars KM65 65A F4 4in1 ESC – Input voltage: 3-6S LiPo – C…

The Skystars H7 HD flight controller supports the DJI HD video system with a dedicated 10V output as well as traditional analogue video OSD. For analogue OSD the board features a dual channel analogue video switcher allowing two cameras to be connected. It features a high speed H743 processor and has 8 uarts for connecting peripherals. This version has a single BMI 270 gyro. Skystars H743 Single Gyro FC Specifications – MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash – Gyro: BMI270 – Baro: …

Wheelbase: 182mm Size: 4 inch Net weight: 34g Motor mounting holes: 9-12mm 3 holes Aluminum column: M2X25/M2X20 The front stack hole supports 16/20/25.5 three-hole positions, the rear stack hole supports 20*20 hole positions. Package Included: 1x G4LR 4′ LONG Range Frame Kit

Experience bright lighting effects with the Skystars FPV LED Boards with Control Panel. With its control panel, you can customize the light to your liking, Leds On/Off, Flash mode and Led color for perfect lighting wherever you fly. Enjoy a professional FPV experience with Skystars. Specifications Input voltage: 7-26v ( 2-6s ) Output voltage : 5V/2A Mounting hole : 20*20*M3 Control panel size ： 32*9*3.5mm LED size :40*5*@mm ( 5LED ) Single channel can connect up to 24 light bea…

Skystars F7+KM65 is a powerful stack for 5″ freestyle and racing drones or 7-8″ long-range drones. The flight controller with modern F7 processor has 16MB memory for blackbox and 5V/3A and 10V/3A BEC. The flight controller can be conveniently used on a drone with both digital and analog video transmission. The pads for connecting the LEDs are in the corners. The integrated barometer for altitude measurement also comes in handy. The KM65 ESC supports 3-6S battery power and current…

Key Features Power supply: 3-6S Processor: STM32F405 Blackbox: 16MB IMU: BMI270 Integrated barometer BEC: 5V@3A, 10V@2A Connector for DJI FPV Mounting holes: 30.5×30.5mm M3 (with softmount) Current sensor ESC FW: BlHeli_S Package Includes 1x FC 1x ESCs 1x Accessory Kit

The Skystars 1404 4600KV motor is a high-performance brushless motor designed for 3″ and 4″ propellers and drones. It boasts a powerful 4600KV rating and delivers smooth, responsive performance, making it ideal for racing, freestyle, and long-range flights. Please note: It is recommended to use propellers compatible with the 1.5mm shaft diameter. Always ensure proper battery selection and ESC configuration to avoid overloading the motor. Regular maintenance is crucial to optimize perfo…