About this product The Happymodel X12 Lite V1.0 Flight Controller comes with an onboard SPI ELRS receiver which supports ELRS TX module 2.0 firmware, and also provides other receiver options like SPI Frsky D8/D16, RED PINE, and SFHSS. This is an amazing flight controller for brushless whoops that will give you an incredible range for your next FPV build. Note: This Lite version comes without the onboard VTX. Features Built-in ExpressLRS 2.4G with an…

This X12 flight controller is all-in-one and consists of a 12A ESC as well as an OPENVTX . SPECIFICATIONS Betaflight firmware target : CRAZYBEEF4SX1280 RX antenna : SMD ceramic VTX antenna : UFL Amperage meter scale : 470 Weight : 5.1g Size : 30*30*8mm RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware…

HappyModel V3 Frame 75mm Whoop Mobula7 Trashcan New design, more durable than V2, with Mobula7 Led_strip mount hole The smoke black version is original for Mobula7 HD Specifications Wheelbase:75mm Weight:5.5g Happymodel 2S 300mah GNB 2S 300mah GNB 3S 300mah Compatible Mobula7 & Trashcan

Since the TBS Tango2 radio is powered by 1S, when an external TX module such as ES24TX Slim Pro needs to run at 1000mw, the original circuit structure cannot maintain normal operation or even turn on. This set of power adapters consists of two parts, one of which is a PCB board directly glued to the back of the main board of the Tango2. Another PCB with pins directly replaces the original external expansion module. The overall replacement is very convenient and is plug-and-play. Of course, y…

Speki+ is the upgrade DSM2/DSMX/SRXL protocol compatible Micro 2.4Ghz receiver, it comes with PA module, longer range and stable signal transmission, with RSSI telemetry. You can get the RSSI from Betaflight OSD Specifications : Brand: Happymodel Model Name: Speki+ Weight: 1.2g Dimension: 20mm*12.4mm*5mm Support protocol: DSM2/DSMX Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider) Antenna connector: I-PEX MHF3 Antenna length: 70mm Input voltage:…

Used for Moblite6Mobeetle 6 Package includes: Short Rubber damping ball 4pcs M1.2*4 Screws 4pcs

Screwdriver for mobula 7 / Mobula 7 HD / tiny Hawk / Micro Drone The perfect sized screwdriver for Philips screws on micro drones.

Used for Bwhoop 75 / Mobula7 frames v2/ Mobula7 frames v3 The short rubber damping ball used for the front, the long rubber damping ball used for back in order to keep the flight controller from loosening when plug or unplug the USB Package include: Long Rubber damping balls 3pcs Short Rubber damping ball 1pcs M1.2*7 Screws 4pcs

PLEASE NOTE: This product does NOT come with foam inside! Image for illustrative purposes. Item Name: Portable Protective Carrying Bag Color: Black Size: 185/175/65mm Weight: 150g Usage: For Happymodel Mobula7 Mobula6 UK65 UR85 Whoop RC FPV Racing Drone Easy to carry Outdoor Protect your tinywhoop out of Scratches and shock Package included: 1 x Carrying bag

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as a 4.2V/4.35V switchable button. Specifications: Brand: Happymodel Weight: 4.5 Dimensions: 45x12x6mm Input: USB Output switchable: Fixed at 200~400 milliamps Cutoff voltage switchable: 4.20v cell charging cutoff (+- 0.5% margin of error) for 1S Lipo Battery 4.35v cell charging cutoff (+- 0.5% margin of error) for 1S 3.8V LIHV…

About this product The Happymodel Pancake AIO is an amazing combination of a flight controller, receiver, and video transmitter! Mounting options include both 30.5mm and 20mm spaced holes. VIDEO: Pancake AIO FC – Happymodel Features 30.5 x 30.5mm or 20x20mm Mounting Pattern ONBOARD SPI EXPRESSLRS 2.4GHZ ONBOARD 5.8GHZ OPENVTX CRAZYBEEF4SX1280 FC 2-S6S Lipo Input Betaflight OSD MPU 6000 SPI 48 Channels Specifi…

Specifications : Brand: Happymodel Size:18*15.5*4.5 With Built-in Voltage booster module Working voltage: 3v~4.35v Weight:1.5gram SD Card support max to 32GB SD Card need to use FAT32 Format Notes: Need to careful to insert the TF SD Card , and don’t pull it out while install the battery. Blackbox is a very useful tools to the FPV pilots, They are used to using black box data analysis software to tune PID and filter parameters. Due to the limited size of many flight controllers, especi…

SPECIFICATIONS Material: PP Color option: Transparent Black Net Weight: 1g Camera angle could adjustable easily Best for Runcam Nano3 INCLUDED 1x Camera Canopy

This Multiprotocol TX Module is suitable for many brand’s quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Flysky transmitter. You will get many new ways to control the RC models . Description: Item number:MTXI6 Item name: Multi-protocol TX Module Signal frequency: 2400-2483.5Mhz Controllable range: ≈100m Input voltage: 3.7-4.2V (1S battery) Supported remote controls: Flysky FS-i6 FS-i6…

A 2.4GHz antenna from Happymodel. Made for their ExpressLRS Module, but can work with any 2.4GHz SMA device. Specifications Frequency (MHz): 2400.0 Efficiency (dBi): -2.94 Gain (dBi): 4.18 Efficiency (%): 50.77 Directivity (dB): 7.12 Peak Gain Position (Theta): 0.00 Peak Gain Position (Phi): 270.00 Weight(gram): 5.83 Length(mm)*width(mm): 69*45 Plug type: SMA Includes 1x Happymodel 2.4GHz Moxon antenna

Happymodel Molding JR Bay mounting case for ES24TX and ES915TX ExpressLRS TX module SPECIFICATIONS : Brand Name: Happymodel Materials: Nylon Color: Black Standard JR Bay dimension Weight: 28gram Available for ES24TX ES915TX. Need a bit mod to the aluminum alloy heat sink while use with ES915TX module. Reserved cooling fan installation position, support 20x20x6mm fan. PACKAGE INCLUDES: 1 x Happymodel Molding JR Bay mounting case for ES24TX and ES915TX ExpressLRS TX…

About this product The frame is a replacement or spare for the Happymodel Mobula8. Features Fits the Happymodel Mobula8 85mm Wheelbase Specifications Compatibility: Happymodel Mobula8 Color: Gray (Transparent Black) Max propeller: 51MM Weight: 11.5g Size: 85mm Includes 1x Happymodel Mobula8 85mm Frame

About this product One replacement canopy for the Mobula7. Able to be adjusted for different camera tilts. Specifications Color: Transparent Black Net Weight: 2.2g Material: PC Includes 1x Camera Canopy Set 4 x M1.2*5 Screws

Happymodel has transformed the Mobula7 2s power whoop into an HD “cinewhoop”! With its built-in Caddx Turtle V2 cam, the Mobula7 HD will record high-quality HD footage, while the new CrazyBee F4 AIO FC which supports up to 3S will give you the power you need to get into every nook and cranny! The newly designed V3 frame is tough and will resist damage better than ever before! Note: Current stock has red propellers, not black like the photos. Features New Crazybee F4 PRO V2.0 AIO Fligh…

Specification: Brand Name: Happymodel Model: Mobula6 HD Item Name: Anti-vibration Standoff & Screws Combo Set Application: Original replace part for Happymodel Mobula6 HD FPV Racing Drone Package Included: 4x Long Anti-vibration Standoff 4x Screws

About this product Replacement canopy for the Happymodel Mobula6. Includes 1x Happymodel Mobula 6 Canopy 1x Camera Clip 1x Screw Set

Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot “Mr Shutterbug,” this whoop is one of the lightest 75mm drone in the market! The Moblite7 features the RunCam Nano3, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini and lightweight whoop (75mm) will take you to hard-to-get places! Features The lightest 1s 75mm brushless whoop Powerful and efficiency The lightest 1s AIO 5IN1 F4 flight co…

Happymodel 650mAh 1S Lipo Battery for Moblite7 or related. Specifications Capacity: 650mAh Max. Continuous Discharge Rate: 60C Discharge Lead: 20mm, PH2.0 Dimensions: 60x18x8mm Weight: 16g Includes 1 x Happymodel 3.8V 1S 650mAh 60C LiHV Micro Battery – PH2.0

Frequency: 915 MHz or 868MHz optional Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 1 g Cable Length: 85 mm Width: 42mm~44mm Compatibility: Happymodel ES900RX , TBS CROSSFIRE NANO RX