Description A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short somewhere, the smoke stopper can limit the current flow and prevent “magic smoke” It saves your electronic components from current surges, and gives you a chance to troubleshoot the failure without having to replace the burnt-out parts. The LED indicator will be green when the current is within 1.2A. The LED indicator turns off and…

iFlight XT30/ XT60 Smoke Stopper ,Every quad/drone owner should have one. A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short somewhere, the smoke stopper can limit the current flow and prevent “magic smoke”It saves your electronic components from current surges, and gives you a chance to troubleshoot the failure without having to replace the burnt-out parts. The LED indicator turns solid green in n…

Always worried about poor soldering and wasting expensive electronics? Well, here it is. The SucceX practice holding board will help steady that hand and give you perfect solder jobs in no time. The practice holding board replicates almost every common type of soldering joint in the FPV world. You can practice on small pads and even large gauge wire pads. Includes: 2x iFlight Soldering Practice Board

Features Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9/10/11/12, Insta360, etc.) Stable power supply from any LiPo (4S-6S input) High power output (up to 5V/3A) Specifications Model: Type-C 90 degree to balance plug Product Weight: 5.5g Support: 4S-6S Output: 5V/3A Input Connector: XH2.54 Output connector: 90°Type-C Length: 110mm Packing List 1 xType C 90 degree to Balance Plug Power Cable

The iFlight Micro BEC features a step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 36V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (5 to 36V). * Short connect ON-12V, the output voltage is 12V 2A. When disconnected, the output voltage is 5V 3A. Features: – Step-down sw…

In the quadcopter, Motors and ESCs can generate noise which can affect your FPV video quality. This compact and effective LC type filter uses large value inductor and capacitor components, designed to clean a noisy DC power supply which often causes lines in wireless video images. The most common signs of noise are disturbing lines appearing across the screen when we are flying. Problems often occur on sensitive FPV video systems when long power leads (7cm+) are used, limited space for wiring…

L-Type Adapter Plate Micro USB Male to Female Specification: Weight: 1.1g Size: 27*9*12mm Feature: 1. Micro USB Male to Female 2. L-type will be more convenient to change the direction of the data cable 3. Support data transmission, synchronization function Package included: 1x L-Type Adapter Plate Micro USB Male to Female

Description This High Current Gimbal Slipring 12.5mm 12 Circuits 2A is suitable for BIG gimbal through high currents, like DSLR gimbal, BMCC, RED EPIC heavy payload gimbal. This slipring suit for iPowerMotor Hollow shaft gimbal motors: like GB,5208,GBM6208,GBM6212,GBM8017,GBM8108,GBM8028,GBM110,which motor featured 12.mm inner hollow shaft diameter. Packing List 1 x Gimbal slipring

Description Encoders are special sensors that are added to each brushless motor of a Gimbal Stabilizer allowing the system to more accurately track motor position for increased stability which in turn also increases battery efficiency. What’s encoder technology in brushless gimbal control system? The 3 axis stabilization gimbal system that relies on both active motor-driven components and passive inertial stabilization. Passive stabilization relies on the principles of inertia (the tende…

BumbleBee HD Type C 90° Connector SPECIFICATIONS Type C to Type C INCLUDES 1pcs x BumbleBee HD Type C 90° Connector

Always worried about poor soldering and wasting expensive electronics? Well, Here it is the Blitz Practice Board Soldering Board , which will help steady that hand and give you perfect solder jobs in no time! The Practice Soldering Board replicates almost every common type of solder joint in the FPV world. You can practice tiny pin and pad soldering or larger gauge wire soldering. Specifications: Dimensions: 40*100mm Weight:13.8g/pc Layers: 2 Thickness: 1.6mm Solder mask color: ink g…

PRODUCT DESCRIPTION The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (6 to 35V). * Short connect ON-12V, the output voltage is 12V. When disconnected, the output voltage is 5V. Features of iFlight B…

Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Compatibility Nazgul5 V3 Frame Kit Nazgul Evoque F5 V2 Frame Kit Nazgul Evoque F6 V2 Frame Kit Chimera7 Pro V2 Frame Kit …

PRODUCT DESCRIPTION This micro-sized step-down voltage regulator is perfect for supplying 12v power (from a higher voltage source like 4S or 5S, even 6S Lipo) to your FPV gear that needs specifically 5V Range. Power 5V flight cameras, LED lights or other gear that can only run on 5V. The compact (14.5*6.6*2.6mm) size step-down voltage regulator takes an input voltage between 12 V and 25 V and efficiently reduces it to 5V while allowing for a maximum output current of 3A. Features: – S…

Overview UBEC 12A (3-14S) is a synchronous step-down regulator from a high voltage or widely varying input supply. It draws the DC voltage from a 3-14S LiPo battery and drops the voltage to a level suitable for receivers and other electronic devices and keeps providing the stable current output of up to 12Amp. The output voltage can be adjusted by the onboard DIP switches. Features High efficiency DC-DC regulator chip for transfer efficiency of over 90% Adjustable output voltage (6.0V/…

The VL53L1X is a state-of-the-art, Time-of-Flight (ToF), laser-ranging sensor, enhancing the ST FlightSense™ product family. It is the fastest miniature ToF sensor on the market with accurate ranging up to 4 m and fast ranging frequency up to 50 Hz. Features Fully integrated miniature module Emitter: 940 nm invisible laser (Class1) SPAD (single photon avalanche diode) receiving array with integrated lens Low-power microcontroller running advanced digital firmware Pin-to-pin co…

Product Description: The Holybro PMW3901 Optical Flow Sensor is a UART version of PMW3901 module with built in BEC. It comes pre-solder with 6pin JST GH connector made to connect right to TELEM ports on most flight controller. Compatible with PX4 (PX4 Guide) & Ardupilot (Data format same as discontinued product CX-OF ). Technical details: Dimension: 14x11x5mm Weight: 0.6g Interface: UART Baud rate: 19200 FPS: 95hz Power: 2.0~3.6V Current: 10mA Data Format: …

PM03D provides regulated power supply as well as current consumption and battery voltage measurements via I2C digital protocol all through a 6pin 2.00mm CLIK-Mate cable. Compatible to flight controller that uses I2C power monitor such as the Pixhawk 5X and up. It is design for multi-rotor like the X500 V2. It has both XT-30 & XT-60 connectors preinstalled for motor ESCs and Battery, as well as two 5V BEC and a selectable 8V/12V output different kinds of peripheral devices. Note Full setup …

PM02 is a simple way of providing your APM and Pix32 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.2V and a maximum of 3A from up to a 12S LiPo battery. The Power Module comes completely assembled with XT60 connectors, and wrapped in shrink tubing for protection. The Power Module is designed to power APM,Pix32, a RC receiver and APM accessories (GPS, radio). It is not de…

Description: This professional-grade RM3100 compass/magnetometer has impeccable signal-to-noise ratios, no drift, and precise magnetic field measurements. It can provide professional-grade heading accuracy and orientation calculations for your vehicle. With this compass, your vehicle can navigate through waypoints with little magnetic disturbance due to motor coils and metal parts. You can achieve the best result by placing this module far away from motor coils and other metal parts, getting r…

Brand Name: HGLRC XT60 Filter Capacitor Weight:14.8g Item Name: HGLRC XT60 Filter Capacitor Applicable to the FPV racing drone XT60 input , maximum support DC35V input power filter, high withstand voltage and large capacity capacitor, providing a clean and stable power for flight controller, ESC, and VTX. Material: TPU Capacitor: 35V 1000uF Wire: AWG14 100mm 3D Printed Weight:2.8g Weight:14.8g Package Included: 1x HGLRC XT60 Filter Capacitor

HGLRC Tuning adapter USB Transfer Extension Cable Module for Flight Controller Specification: Item Name: Tuning adapter Size:11.65 x 11.11mm Weight: 2.4g Package Included: 1x HGLRC Tuning adapter

HGLRC AMASS XT60 CURRENT SENSOR Specification: AMASS XT60 CURRENT SENSOR Voltage: 6S(25.2V) Current Max:120A Weight:6.8g

HGLRC AMASS XT30 CURRENT SENSOR Specification: AMASS XT30 CURRENT SENSOR Voltage: 4S(16.8V) Current Max :80A Weight :3.3g