The SucceX-E Mini F4 Stack by iFlight includes the advanced SucceX Mini F4 Flight Controller along with the SucceX 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max. Specifications SucceX-E Mini F4 Flight Controller MCU：168MHz STM32F405 Gyro：MPU6000 Blackbox：8MB Betaflight OSD：YES BEC：5V 2.5A Uarts：5 ESC Telemetry：yes INA Pad：nuart2 Input voltage：2-6S Size:25*25mm /20*20mm φ3 mounting Weight: 4g Firmware：BETAFLIGHTF4 Moun…

ESC // SucceX-E Mini 35A Top Features: – 6 layers double-sided PCB board – 2oz 1.4mm thick power board – TDK MLCC Low ESR ceramic capacitors – Top grade 2R203 MOSFET Specification: MCU: BB21 F16G BLHeliS Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 35A / Burst: 40A BEC: No Supports up to Dshot600, Proshot, Oneshot, Multishot Targ et: G-H-30 Weight:6.9g Mounting pattern: 20*20, φ3mm with Grommets φ2mm Dimensions: 31*30mm (incl…

Description Introducing the All-New Borg Series – Power Meets Precision! The new ESCs feature an integrated anti-spark filter, providing protection against voltage spikes that can damage your equipment. Designed with high polymer capacitors, this ESC eliminates the need for external capacitors in 5-inch racing models, simplifying installation and reducing weight. Experience enhanced reliability and performance with this cutting-edge technology, tailored for the demands of competitive racin…

Description Introducing the All-New Borg Series – Power Meets Precision! The new ESCs feature an integrated anti-spark circuit and a TVS transient voltage suppressor, providing double protection against voltage spikes that can damage your equipment. Designed with high polymer capacitors, these ESCs eliminate the need for external capacitors in 5-inch racing models, simplifying installation and reducing weight. Experience enhanced reliability and performance with this cutting-edge technolog…

Introducing the All-New Borg Series – Power Meets Precision! The Borg 5S RX FC Flight Controller is specifically designed for racing fpv, providing unmatched performance. This innovative controller features a built-in ELRS 2.4GHz receiver and an integrated antenna, ensuring a reliable connection and enhanced control during your flights. Additionally, the Borg 5S RX FC offers the flexibility to support external receivers, allowing you to customize your setup to meet your individual racing nee…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Changelog October 20, 2023 : Flight control Blackbox flash capacity changed from 16MB to 8MB April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. FC Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD…

Specifications Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2-6S lipo input MCU: BB21 Constant: 55 Amps Burst: 65 Amps Telemetry Output: No Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay) Packing List 1 x BLITZ Mini E55S 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires

PRODUCT DESCRIPTION Specification: – Dimension: 35*42mm – Mounting Holes: 20*20mm/Φ4mm – Weight: 11.3g – Supports 2-6S lipo input – MCU：BB21 – Constant: 55 Amps – Burst: 60 Amps – Current sensor: Yes – BEC: No – Current rate: 100 – Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. – Target: QH-50 16.7 Wiring Diagram: Package Included: – BLITZ Mini E55S 4-IN-1 2-6S ESC * 1pc – Power cables & ESC signal wires * 1set

Changelog BLITZ Mini E55 4-IN-1 ESC V1.3 – Metal Mosfets (Jan-28,2023) Description The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Nazgul F5/F6 Series BNF. These new 55 Amp BLHeli 32 BLITZ Mini 4-in-1 ESCs can handle even the most amp-hungry motors. Specifications Product Name: BLITZ Mini E55 4-IN-1 ESC Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 60A MCU: G071 BEC: No Firmwa…

FC Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27mm Weight: 5g BEC: 5V 2.5A ESC Specifications Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2…

Note When using this ESC on a 7-10 inch drone, please add an additional capacitor to prevent overloading the onboard capacitor of the ESC. This precaution will help ensure optimal performance and reliability of your drone’s power system. Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging With LC filter Changelog Jan. 11, 2024 : Gyrosco…

Description The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V. The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, …

PRODUCT DESCRIPTION Specification: – Mounting Holes: 30.5*30.5mm/Φ4mm – Weight: 15.3g – Supports 2-6S lipo input – MCU：G071 – Constant: 55 Amps – Burst: 65 Amps – Current sensor: Yes – BEC: No – Current rate: 200 – Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. – Target: IFLIGHT_BLITZ_G2 Package Included: – BLITZ E55S 4-IN-1 2-6S ESC * 1pc – Power cables & ESC signal wires * 1set

Hummingbird 305 Flight Stack – F722 FC with Built-in ELRS + 80A 4in1 ESC Optimized for 5” to 10” Drones | Up to 8S LiPo Support | Built for Power & Durability Hummingbird 305 Stack combines advanced control with unmatched power. This stack is built for serious freestyle and long-range missions, featuring the Hummingbird 305 Flight Controller with a high-speed F722 MCU , built-in 2.4GHz ExpressLRS Diversity Receiver , and full support for Betaflight & iNAV firmware . Designed with a TC…

Hummingbird 200 RaceSpec Stack 20x20mm – ELRS FC + 80A AM32 ESC The Hummingbird 200 RaceSpec Stack is a purpose-built 20×20 flight stack designed from the ground up for competitive 5” FPV racing. Co-developed with professional racer Kyle Buell (aka Twidgit) and tested rigorously over half a year of real racing conditions, this stack delivers the durability, precision, and simplicity that race pilots demand. At the heart of the system is the Hummingbird 200 Flight Controller , powered by…

F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output up to 96K / 4~6S / BLHELI32 The all new Tekko32 Metal is the first 4in1 ESC in the market to adapt the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response. Features: New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) PWM output up to 96K (default 48K) Metal-cased MOSFET for excellent heat dissipation Massive on-board capacitance for noise filtering at 2068uf 3 oz copp…

Features: All new High-quality MOSFETs with low internal resistance & heat generation, and individual metal heatsink New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) Separate drive & control circuit, reducing the electrical interference to the control circuit Specification: Continuous Current: 50A x4 Burst Current: 60A x4 Battery Supports: 4-6S PWM Frequency: 16k to 96k Supports DShot 150/300/600/1200/2400 Supports MultiShot/OneShot/Proshot/PWM etc. …

Holybro Tekko32 F4 4in1 50A ESC is one of the first 4-In-1 ESC to adapt fast F4 MCU @ 150MHz for smooth control operation and quick response. Pin Map: F4 MCU @150Mhz / PWM output up to 96K / 4~6S / BLHeli32 / 30×30 Features : New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) PWM Frequency: 16K to 96K A separate drive & control circuit broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit. Pa…

Tekko32 F4 45A ESC is the latest AM32 ESC from HolyBro. The Tekko32 ESC runs in conjunction with an ARM 32bit compatible F4 MCU. It can run input signals with lower latency, at faster rates, smooths out the RPM band, is capable of both voltage and current monitoring and limiting, as well as offering customization of the brake on stop force. The Tekko32 ESC has a lot of room to grow and wide compatibility range with future products. Features: F4 MCU with AM32 firmware Dshot1200 up to 32kHz …

Description: The Holybro Kakute G4 AIO FC w/ 35A ESC is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power. It also works with analog systems due to the onboard OSD chip. The FC on this AIO uses a G4 processor, and the 4in1 ESC uses four F4 processors running AM32 firmware. It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX…

Flight Controller Kakute F722 Overview: High-performance STM32 F722 MCU with speeds up to 216MHz. ICM42688P gyroscope, independent low-noise power supply. Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port. Built-in analog video OSD, 16 Mbytes black box, High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output. Specification: MCU: STM32F722 32-bit processor, 216M…

SKYWALKER series of affordable brushless power systems feature high performance, quality components and impressive craftsmanship is the best choice for new beginners.This is a Hobbywing Skywalker 50A UBEC Brushless ESC SW50A Related Article: WHAT IS AN ESC AND A UBEC? Features: 1 Safety arming feature: Regardless of the throttle stick position, the motor will not spin after the battery is connected. 2 Throttle calibration function: The throttle range can be calibrated to be compat…

HGLRC Zeus F760 STACK 30X30 3-6S | F722 Flight Controller | 60A BL32 4in1 ESC Usage:for 100mm-450mm Frame Kit Installing Hole:30.5X30.5mm.M3 Weight: 32.7g Item Name: Zeus F760 STACK Zeus F722 Flight Controller MPU:BMI270 CPU:STM32F722 RET6 Input Voltage: 3-6S Lipo BEC Output:9V/1.5A,5V/2A Weight:9.43g Zeus 60A BL32 3-6S 4in1 ESC CPU:STM32F051 Input Voltage:3-6S Lipo Steady Current: 60A Peak Current:65A（10 Sec） Weight: 18g Package Included: 1x F722 Flight Controller 1…

Plug and play with the HGLRC Zeus F745 20×20 Stack! This stack comes with the Zeus F722 Mini FC and the 45A BL32 3-6S 4-in-1 ESC and is compatible with the DJI Digital HD FPV System. This stack features HGLRCF722(HGLRC) firmware, STM32F722 RET6 CPU, MPU6000 MPU among other cool features! Specifications of HGLRC Zeus F745 FC Firmware:BF HGLRCF722(HGLRC) Installing Hole:20X20mm.M2/M3 Weight:21.5g Zeus F722 mini Flight Controller MPU:BMI270 CPU:STM32F722 RET6 Input Voltag…