Introducing the All-New Borg Series – Power Meets Precision! The Borg F7 Mini Flight Controller is specifically designed for racing FPV, providing unmatched performance. Elevate your racing experience with the cutting-edge technology of the Borg Series! Features Supports 4S to 8S battery inputs, offering versatility for various racing setups. Integrated 12V BEC provides stable power for your VTX system and allows remote control to switch it on and off. FPC cables ensure sec…

Description Introducing the All-New Borg Series – Power Meets Precision! The Borg 5S RX FC Flight Controller is specifically designed for racing fpv, providing unmatched performance. This innovative controller features a built-in ELRS 2.4GHz receiver and an integrated antenna, ensuring a reliable connection and enhanced control during your flights. Additionally, the Borg 5S RX FC offers the flexibility to support external receivers, allowing you to customize your setup to meet your indiv…

Description Our high-quality flight controller, designed specifically for Fixed Wing UAV enthusiasts, is compatible with Betaflight, INAV, and Ardupilot. This controller is tailored to meet the needs of hobbyists who are passionate about model aviation, providing a reliable and efficient solution for their aircraft. With advanced features and compatibility with popular software platforms, our flight controller offers a superior flying experience for enthusiasts looking to take their Fixed Wi…

Features Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware Specifications MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Y…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Changelog October 20, 2023 : Flight control Blackbox flash capacity changed from 16MB to 8MB April 6, 2024 : The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Ch…

PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging Changelog: – 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000. Specifications: MCU: STM32 F722 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456 Flash: 16MB (Blackbox flash) UARTS: 6 Mot…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Changelog October 20, 2023 : Flight control Blackbox flash capacity changed from 16MB to 8MB April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. FC Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD…

Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27mm Weight: 5g BEC: 5V 2.5A Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4…

Description Introducing the BLITZ H7 Pro Flight Controller – a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware Specifications MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 30.5*30.5mm Dimen…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging With LC filter Changelog Jan. 12, 2024 : Gyroscope changed from BMI270 to ICM42688. Product name updated to BLITZ F7 V1.2 Flight Controller Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs:…

PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging – With LC filter Changelog: – 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000. Specifications: MCU: STM32 F722 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS…

PRODUCT DESCRIPTION Top Features of iFlight Blitz F7 Pro: – Improved circuit design, better components, and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging – 512MB BlackBox – With LC filter Specifications of iFlight Blitz F7 Pro: Mount pattern: 35*35mm/ 4mm PCB hole diameter Smartaudio / IRC Tramp VTX protocol supported Firmware target: IFLIGHT_BLITZ_F7_PRO Input Voltage: 14.8V-34V (4S-8S LIPO…

Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A Changelog November 6, 2023 : The flight c…

Hummingbird 305 Flight Stack – F722 FC with Built-in ELRS + 80A 4in1 ESC Optimized for 5” to 10” Drones | Up to 8S LiPo Support | Built for Power & Durability Hummingbird 305 Stack combines advanced control with unmatched power. This stack is built for serious freestyle and long-range missions, featuring the Hummingbird 305 Flight Controller with a high-speed F722 MCU , built-in 2.4GHz ExpressLRS Diversity Receiver , and full support for Betaflight & iNAV firmware . Designed with a TC…

Hummingbird 255 AIO Flight Controller AT32F435 AM32 50A 3-6S The HummingBird 255 AIO Flight Controller AT32F435 ICM42688 AM32 50A 3-6S is a powerful all-in-one solution tailored for modern FPV drone builds.Featuring a high-performance AT32F435 MCU with a blazing 288MHz core speed, it outperforms traditional F405 by up to 71% and F722 by 33% , delivering unmatched responsiveness and processing power. The Betaflight-recommended ICM-42688 gyro and dual independent BEC system (10V 2A + 5V 2A) d…

Hummingbird 200 RaceSpec Stack 20x20mm – ELRS FC + 80A AM32 ESC The Hummingbird 200 RaceSpec Stack is a purpose-built 20×20 flight stack designed from the ground up for competitive 5” FPV racing. Co-developed with professional racer Kyle Buell (aka Twidgit) and tested rigorously over half a year of real racing conditions, this stack delivers the durability, precision, and simplicity that race pilots demand. At the heart of the system is the Hummingbird 200 Flight Controller , powered by…

The Holybro S500 V2 Kit is affordable, lightweight, simple, easy to assemble, and no soldering required. This is a complete kit that includes almost everything you need to fly. All you will need is a battery and an RC system (optional). It is perfectly compatible with various Holybro Flight Controller such as the Pixhawk4, Pixhawk4 Mini, Pix32 v5, and Durandal. This S500 frame composed of mixture of materials. The arms are made of high strength, ultra-durable Polyamide-Nylon composite material…

Description The Pixhawk® 6C Mini is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It shares the same STMH743 microprocessor and sensors as the Pixhawk® 6C. Compared to the standard Pixhawk® 6C, this Mini version has a built-in PWM header, and some ports have been removed in order to fit this Mini form factor. Inside the Pixhawk® 6C Mini, you can find an STMicroelectronics®-based STM32H743, paired …

The version that is being ship at the moment is Kakute H7 V1.3. This V1.3 now has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port. For details on the difference between versions, please see this chart . Description: The Holybro Kakute H7 v1.3 Flight Controller is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V/3A BEC, easy soldering layout and much more. The…

Overview The Holybro Kakute H7 Mini is a Flight Controller full of features including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout and much more.The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power HD system like Caddx Vista while supporting analog system. It features an onboard “VTX ON/OFF Pit Sw…

Description: The Holybro Kakute G4 AIO FC w/ 35A ESC is a powerful and compact fight controller + 4in1 ESC All-in-One board that is plug and play with digital systems such as the DJI O3 at full power. It also works with analog systems due to the onboard OSD chip. The FC on this AIO uses a G4 processor, and the 4in1 ESC uses four F4 processors running AM32 firmware. It has STM32G4 MCUs, ICM-42688p gyro, 5V & 10V BEC, 16MB of flash storage, DSP310 baro, plug & play port for digital VTX…

Feature High-performance STM32 F722 MCU with speeds up to 216MHz. ICM42688P gyroscope, independent low-noise power supply. Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port. Built-in analog video OSD, 16 Mbytes black box, High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output. Specification: MCU: STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash …

HGLRC Zeus F760 STACK 30X30 3-6S | F722 Flight Controller | 60A BL32 4in1 ESC Usage:for 100mm-450mm Frame Kit Installing Hole:30.5X30.5mm.M3 Weight: 32.7g Item Name: Zeus F760 STACK Zeus F722 Flight Controller MPU:BMI270 CPU:STM32F722 RET6 Input Voltage: 3-6S Lipo BEC Output:9V/1.5A,5V/2A Weight:9.43g Zeus 60A BL32 3-6S 4in1 ESC CPU:STM32F051 Input Voltage:3-6S Lipo Steady Current: 60A Peak Current:65A（10 Sec） Weight: 18g Package Included: 1x F722 Flight Controller 1…