The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The vista unit can be mounted on a racing drone and used with DJI FPV Goggles or a remote controller to transmit video, control signals, and flight controller information wirelessly! VIDEO: Caddx Polar Starlight Camera Review Features Lightweight d…

About this product The Caddx Polar Nano Starlight Camera is a low-light camera with a 1/1.8″ digital starlight sensor. Perfect for your nano-sized builds with its ultralight features. This version comes with an 8cm Cable. VIDEO: Caddx Polar Nano Vs. Polar – Side By Side Comparison (Watch In 4K) Features Starlight camera is great for low-light flights 1/1.8 Inch HD Digital Starlight Sensor Low-latency HD image transmission Caddx Polar Nano Starlight Camera 14x14mm Na…

The Caddx Polar Micro Air Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 120fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 28 ms.

About this product The Caddx Polar Micro Camera (with cable) is an FPV camera with a mega starlight sensor. The Caddx Polar has 720p 60fps image transmission, with a transmission range of up to 4km and a minimum end-to-end latency within 32 ms. The camera is compatible with Vista and Air Unit modules. This can be mounted on a racing drone, used with DJI FPV Goggles , or a remote controller to transmit video, control signals, and flight controller information wirelessly! VIDEO: Caddx…

The Caddx Nebula Pro Nano Vista Kit is another advanced video transmission module by Caddx and fully authorized by DJI that supports a 5.8GHz digital video signal and switchable 16:9/4:3 1080p to 720p image transmission. The Caddx Nebula Pro Nano with Vista is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range up to 4km. The Vista system allows up to eight drones to fly simultaneously. Each operator has an ex…

The Caddx Nebula Nano Digital FPV Camera is here! This nano-size camera measures 14x14mm (can be 19x19mm with an added case) and only weighs 4.5g, which is less than the DJI Digital FPV Camera. It features a 1/3″ CMOS sensor, NTSC/PAL(Switchable), 720/60fps resolution, aluminum housing, and comes in two colors: silver and black. The Caddx Nano is compatible with the Caddx Vista and the DJI Air Unit Module. Features Only weights 4.5g Can expand from a 14x14mm camera to a 19x19mm camera …

A single-camera module, which has a quick-release design for convenient replacement. The FPV camera does not come with a back cover or coaxial cables installed. Does not come with Air Unit Module. Cable not included, this is the camera only. Back Plate is included. Now distributed by Caddx FPV. Specifications Sensor: 1/3.2” CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 × 21.1 × 20.1 mm Weight: 8…

The CaddxFPV Air Unit Micro Version is a 19×19 micro-sized camera with low-latency digital video transmission. The Air Unit Transmission technology utilizes a two-way communication system to stabilize signal connections, granting pilots more flexibility when flying through challenging areas. Modern innovations, like a strong transmission system embedded remote controller receiver, and multi-antenna technology, is why the Air Unit can perform remarkably. Features 4-in1 Closed Loop control f…

Description Budget video receiver BAYCK STARFISH D1 5.8G for 48 channels with sensitivity up to -98dbm. This VRX model is compatible with Fatshark and Skyzone type goggles. Detailed product specifications can be found below. Features Video receiver sensitivity: -98dbm Compatible with: Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO, HDO2 Skyzone 04L,04X Features Model: STARFISH D1 Microcontroller: ESP32 Display: 0.96-inch TFT/LCD RF sensitivity: -98dbm …

Description Budget video receiver BAYCK STARFISH D1 5.8G for 48 channels with sensitivity up to -98dbm. This VRX model is compatible with Fatshark and Skyzone type goggles. Detailed product specifications can be found below. Features Video receiver sensitivity: -98dbm Compatible with: Fatshark Dominator V1, V2, V3, HD1, HD2, HD3, HDO, HDO2 Skyzone 04L,04X Features Model: STARFISH D1 Microcontroller: ESP32 Display: 0.96-inch TFT/LCD RF sensitivity: -98dbm …

Type: ROCK Frequency: 5.8G,5 frequency groups, 40 frequencies Antenna interface: MMCX Output Power: 25mw,400mw,800mw,1.5w,2.5W Input power: 7-28 V DC Current: 600mA@12VDC@2W Adjustability: Buttons/via OSD Dimensions: 41.7*27.6*14mm Weight: 23g Mounting: 20*20mm ②M2

AKK X2 VTX has a lc filter, which can filter the power and make sure you get clean video. This FPV video transmitter supports parameter adjust and works with Betaflight, and compatible with BF OSD FC. It is worth mentioning that both mmcx and sma connector are available 25mW/200mW/500mW/800mW power switchable Support PIT-Mode and work with Betaflight,flight controller,OSD Super mini size and light weight,One button frequency and power setup. 7-24V input and can be provides 5V out…

Do you find it a little similar to AKK X2 VTX? Oh, actually X2-ultimate FPV VTX is the perfect upgrade version! The AKK X2-ultimate FPV VTX launched the end of Spring and has been making waves in the industry with its great performance. This FPV VTX delivers clearer video image, longer transmission range, and, most importantly, an unforgettable FPV flying experience. Moreover, it supports smart audio, pit mode and Betaflight, making it an actual fashional FPV VTX. The power up to 1200mW is quie…

The world’s first small form factor 8W VTX 25/1000/3000/5000/8000mW Ultra wide 96 channels from 4900 to 6060MHz Equipped with cooling fan and heat sink Recommend to use this VTX with AKK Tube Antenna or Diamond Antenna AKK 5GHz Antenna works in 4900-5500MHz, 5.8GHz antennas works in 5500-6060MHz

The world’s first small form factor 5W VTX 25/200/500/1000/3000/5000mW Ultra wide 96 channels from 4900 to 6060MHz Equipped with cooling fan and heat sink Recommend to use this VTX with AKK Tube Antenna or Diamond Antenna AKK 5GHz Antenna works in 4900-5500MHz, 5.8GHz antennas works in 5500-6060MHz

It is not just a VTX but an ultra, ultra long range VTX that you never see before. Put it in your drone, you will find the secret of long range FPV. Ture FPV video transmitter 10km+. In an ideal environment, the range of this VTX will update the human perception for 5.8G long range fpv. New heat dissipation equipment. It combines with cooling fan and heatsink, cooling down the VTX efficiently and making it more stable than any other VTX. Breaks the limit of output power. 1000mW&2000mW&3…

AKK Race Ranger FPV VTX makes a significant improvement in comparison with all other AKK VTXs. It has far better cover protection, longer transmission distance and clearer indicator, which makes it a great 5.8Ghz Video Transmitter, bringing entirely new FPV experience for you! Full cover protection . This AKK FPV VTX is full covered metal shell, so it may not be broken even in an accidental fall! Clearer indicator. 8 blue led for CH,5 green led for the band and 3 red led for power. The new …

AKK VTX entering a new era, Dual antennas make a difference. It transmits enhanced LHCP and RHCP signals, which makes transmission duple powerful. Installed with AKK self-made antennas, experiencing the unprecedented strong signal. Dual Antenna VTX. This FPV VTX breaks entirely the old design and structures, which maximizes the signal transmission possibility. Wide voltage input. 7-30V super wide input satisfies nearly all FPV flight needs. Stable power output. Stable power output…

AKK MMCX Linear Antenna for AKK X2, FX2, FX3 Specifications: Frequency Range: 5.8GHz Gain: 2.15dBI Length: 70mm Connector: MMCX Weight: 1.2g Package includes: 1 x AKK MMCX Linear Antenna

AKK IPEX Linear Antenna for AKK X5 The 5.8GHz 2DBI MMCX FPV Brass Linear Antenna, Straight is a high-quality antenna that is designed for use with FPV drones and other RF devices operating in the 5.8GHz frequency band. It is a linear antenna, which means that it radiates and receives radio waves in a straight line in front of it. This makes it ideal for long-range FPV applications. The antenna is made of brass, which is a durable and corrosion-resistant material. It is also very ligh…

The Infinite DVR VTX PVV Video Transmitter is the first DVR VTX of AKK. Just as its name implies, The VTX comes with DVR (digital video recorder) function that gets clear footage directly from the FPV camera rather than from your video receiver. It supports smart audio, Betaflight, allowing you to remotely change settings on the VTX like power output, frequency and more via Betaflight OSD controls. This DVR VTX is also a long VTX with super high output up to 1000mW. Just try it, you may not find…

The AKK FX3-ultimate Mini VTX is both an MMCX VTX and UFL VTX, which means you can have more choice for VTX connector even one connector was broken. It equipped with led indicator, microphone and one control button. Support smart audio, pit mode, and Batefligtht make it a fashional FPV VTX. It comes in a 20*20mm stackable mounting hole, perfect for your 20×20 build! Key features: Support Pit Mode 25mW, 200mW, 400mW and 600mW power switchable One button frequency and power setup OSD co…

Comparing to recording video from your video receiver, DVR VTX has its own advantage. It provides us clear footage directly from the FPV camera, so it minimizes signal interference from 5.8GHz transmission. If you are finding an FPV VTX with DVR(digital video recorder), this one may be the right one! Novel design FPV VTX. The design of this FPV VTX is different from other DVR VTXs. It has a double layer stacking structure, one for video transmission, one for DVR. It can be normal use though y…

FX3 PFV VTX is similar to the FX2 FPV VTX but has a smaller profile that uses 20x20mm mounting pattern, in the cost of lower max output power, to be designed for smaller micro builds.