For filmmakers who demand more power and stability, the AOS Cine35 V5 offers a robust solution, supporting up to 3.5″ props. Features Flexible battery mounting With options for lengthwise or toilet tank battery mounting, the AOS Cine35 V5 makes it easy to balance your drone’s center of mass, regardless of your camera setup. Captive battery straps ensure quick and easy battery swaps, so you can spend more time in the air. Immersive 155° FPV Experience Enjoy an expansive 155-…

Description The latest version of this frame is the AOS Cine35 EVO. It has updated camera plates to support the DJI O3 Air Unit as well as all other 19-20mm FPV cameras. Features Designed for 3.5 inch props, no props in view. 4 mm Truss Arms Up to three 25.5 or 20 mm stacks (front, center and rear) One 30.5mm stack (center) 32x32mm GoPro mounting holes in top plate with installed press-nuts XT60 pass through top plate Captive battery strap slots for lengthwise or toil…

The AOS Cine25 V5 is a top-tier frame for building a compact 2.5″ cinewhoop drone. It features carbon fiber propeller guards that are both strong and lightweight. The drone can be built with either analog or digital video transmission, including support for DJI O3 and O4 Pro . The camera is mounted in aluminum side plates . The FPV camera is positioned far forward enough that no parts of the frame are visible in the FPV feed, even with up to 155° FOV. This is especially appreciated…

Description The latest version of this frame is the AOS Cine25 EVO. It has updated camera plates to support the DJI O3 Air Unit as well as all other 19-20mm FPV cameras. Features Designed for 2.5 inch props, no props in view. 2.5 mm Truss Arms Up to two 25.5 or 20 mm stacks (front and rear) One 25.5 or 20 mm stack (center) 32x32mm M2 GoPro mounting holes in top plate with installed press-nuts XT30 pass through top plate Captive battery strap slots for lengthwise or to…

Introducing the AOS UL7 – the ultimate ultralight 7 inch FPV drone frame with a revolutionary design. The UL7 uses a vertical truss arm structure that is super-light and super-stiff, providing maximum flight performance for the smoothest footage whilst saving weight to increase the flight time. The latest version of this frame is the AOS UL7 EVO. It soft mounts the FPV Camera, supports ND filters with DJI O3, and fits 14-20mm FPV cams. The AOS UL7’s revolutionary design is optimized to deliv…

Features Upper(middle) plate thickness: 2.5mm Bottom plate thickness: 2 mm Top plate thickness: 2mm Arm Thickness: 8mm Packing List 1x Replacement parts for AOS 7 EVO V1.2 Frame (optional)

The AOS 5 EVO is a lightweight drone designed with low-vibration technology. This drone features state-of-the-art electronics and topology optimization. The AOS 5 EVO allows you to run less filtering, with less associated delay, and increase your PID gains far higher than any other frame in its weight class. Get ready for the most responsive 5″ quad you have ever flown! Compatible with: AOS 5 V2 AOS 5 O3 AOS 5 EVO Package includes: One pair of spare arm (1x arm) that can be used either i…

Description： Built to be the ultimate 5″ freestyle platform. The AOS 5 EVO has been updated to be compatible with the new DJI O3 Air Unit as well as existing 30.5×30.5mm, 25.5×25.5mm and 20x20mm electronics. The camera cage and arms have been reinforced to improve durability. As with all AOS frames exceptional vibration and resonance performance is guaranteed, eliminating IMU resonance issues with O3 image stabilization. Changelog： June 6, 2023: The frames have been updated to suppor…

Description Lose the GoPro and experience an unparalleled mix of speed, power, and agility. Designed with cutting-edge patent pending technology and premium materials, here’s why the iFlight AOS 4 V5 Frame is the ultimate choice for drone enthusiasts. Changelog Mar. 11, 2025 : Frame Kit updated to be compatible with DJI O4 Air Unit and DJI O4 Air Unit Pro. Features Metal Camera Cage The AOS 4 V5 is equipped with an ultra-durable 7075 Aluminium Camera Cage that accom…

Specifications Arm Thickness: 3mm Bottom plate thickness: 3mm Top plate thickness: 3mm Packing List Replacement parts for Afterburner 5 Frame（optional）

Description Afterburner – The Performance 5inch by 2RAW and iFlight Afterburner is designed for professional pilots who use their FPV drones for cinematic work, this frame kit is not designed around being crashed into concrete and coming out fine. The frame kit is designed around aerodynamics and balance. Features Smallest Footprint Afterburner has a 20% smaller footprint than traditional 5inch freestyle frames, this allows for easier transportation as well as increased agili…

X650 Frame Kit Includes: X650 V2 Frame Only Frame Details: Wheelbase: 650mm Motor mount Mount pattern: 16-25mm Body – Full Carbon Fiber Top & Bottom plate (160 x 160mm, 2mm thick) Arm – High strength & ultra-lightweight 20mm carbon fiber tubes with newly designed aluminum foldable arm mount Landing gear – 16mm & 10mm diameter carbon fiber tubes with strengthened & improved plastic tee connectors. Upper & Battery Plate – 120mm x 128mm carbon fiber plate for various pa…

The Holybro S500 V2 Kit is affordable, lightweight, simple, and easy to assemble, and no soldering is required. This is a complete kit that includes almost everything you need to fly. All you will need is a battery and an RC system (optional). It is perfectly compatible with various Holybro Flight Controllers such as the Pixhawk6C, Pix32 v6, etc. This S500 frame is composed of a mixture of materials. The arms are made of high-strength, ultra-durable Polyamide-Nylon composite material reinforce…

Wind5 Lite V2 is a lightweight racing frame designed for racing drone competitions. It is designed as a positive X structure with a wheelbase shortened to 195mm, which provides a better flying feel. The frame uses Toray-T700 carbon fiber + 7075 aviation-grade aluminum columns, and is equipped with an arm protection rod design. The frame structure is more solid/explosion-resistant, and supports quick-disassembly of the arm for easy daily maintenance. Features: * The frame is made of high-stre…

The Veyron35CR 3.5″ CineWhoop Frame Kit by HGLRC is a lightweight pusher-style frame that easily supports a full GoPro camera. This frame features EVA Foam protection guards in Gray, White and Yellow. Note: Frame Kit Only… electronics, motors, props, and cameras are not included. VIDEO: HGLRC Veyron 35 CINEWHOOP FPV Drone Build Guide Features Ultra-light and lasts super long in flying Colorful EVA Foam Protection Guards 20×20-25.5×25.5mm mounting holes Pusher-style Frame …

Feature: *Supports (20×20-25.5×25.5) mounting holes *Supports both AIO/stack installing at the same time. Equipped with 2004 Aeolus motors, ultra-lightweight and have a super long flight time. *Using mould EVA protecting ducts, super durable. Brand: HGLRC Model: Veyron30CR Cinewhoop Frame Material:3K carbon fibre Type:3 inches Frame Wheelbase:140mm Size:215*190mm Top plate:1.5mm Bottom plate:2mm Space:25mm Flight control mounting hole:20x20mm/25.5×25.5mm Support camera:19*19mm …

HGLRC Veyron25CR 2.5 Inches Cinewhoop Indoor FPV Frame Feature: *Supports (20×20-25.5×25.5) mounting holes *Supports both AIO/stack installing at the same time.Epuipped with 1404 Aeolus motors, ultra-light weight and have a super long flight time. *Using mold EVA protecting ducts,super durable. Brand:HGLRC Model:Veyron25CR Cinewhoop Frame Material:3K carbon fiber Type:2.5 inches Frame Wheelbase:120mm Size:187*164mm Top plate:1.5mm Bottom plate:2mm Space:25mm Flight control moun…

Sector 150 frame Cinewhoop biuld from Rotorbuilds HGLRC Sector150 Freestyle Frame Kit Material:3K Carbon Fiber Model:Sector150 Wheelbase:150mm Type:3 Inch Freestyle Frame Bottom Plate Thickness:3mm Standoff Height:28mm Flight Control Installation Holes:16X16/20X20mm Support Camera:14X14/19X19mm Overall Size:210*183mm Weight:79g Features: TPU Gopro Mount TPU Sector AIR UNIT TPU Sector SMA Mount Propeller Protective Guard TPU Sector Camera Mount Camera mounting size support:14…

HGLRC Sector X5 FR 5-inch Freestyle FPV Frame Features: *Replaceable arms for quick disassembly without taking apart the whole frame *A fixed power outlet for convenience and protecting your power cable from cutting by propellers *Dust-proof straps covering both sides to better protect your rig and keep them clean *CNC aluminum side plates combined with 3D printed parts to make your drone look dope! Brand name :HGLRC Model :Sector X5 Freestyle Frame Material :3K Carbon Fiber Type:5-in…

HGLRC Sector D5 FR DJI O3 HD 5-inch Freestyle FPV Frame Use for Sector D5 Analog/HD/DJI O3 AIR UNIT FRAME KIT Features: *Replaceable arms for quick disassembly without taking apart the whole frame *A fixed power outlet for convenience and protecting your power cable from cutting by propellers *Dust-proof straps covering both sides to better protect your rig and keep them clean *CNC aluminum side plates combined with 3D printed parts to make your drone look dope! *The Sector D5 optimiz…

FEATURES Flight control installation damping system Gopro Universal Mount Gopro fixied bracket Gopro Mount Gopro lens protector Motor protector Mount T shaped antenna Mount GPS Mount SMA antenna Mount DJI ANT antenna Mount Base plate protector Mount DJI Air Unit Mount DJI FPV camera lens protector Power cord fixed Mount Capacitor mounting slot SPECIFICATION Brand Name:HGLRC Model:Sector 7 V3 Frame Kit Material:3K Carbon Fiber Top plate thickness:2mm …

The HGLRC Sector 6 V3 Freestyle Frame comes in three different sizes: 5″, 6″, and 7″. It features no props in view, so you can enjoy a clear view when flying and you can adjust the camera mount from 25°, 30°, 35° to 40° to suit your needs. Compatible with 5.8G VTX and DJI Digital FPV System. Features No Props in view No more props in view with the V3. Enjoy the clear view of flying! Adjustable camera mount angle Adjust the angle of the camera mount from 25°, 30°, 35° to 40° to su…

HGLRC Sector 5 V3 Freestyle frame 5 Inch for FPV Racing Drone Compatible with 5.8G VTX and DJI Air Unit -No Props in view No more props in view with the V3. Enjoy the clear view of flying! -Adjustable camera mount angle Adjust the angle of the camera mount from 25°, 30°, 35° to 40° to suit your needs. -Capacitor slot to hide the capacitor for a neater look Cannot find the capacitor in the drone? it is “hidden” somewhere 🙂 -A complete range of TPU parts All the STL files of the TP…

FEATURES: *Supports (20×20-25.5×25.5) mounting holes *Supports both AIO/stack installing at the same time,, ultra-light weight and have a super long flight time. SPECIFICATIONS: Brand name:HGLRC Model:Sector30CR Freestyle Frame Material:3K carbon fiber Type:3-inch Frame Wheelbase:150mm Size:147 * 130mm Top plate:2mm bottom plate:3mm Space:25mm FC mounting hole:20x20mm/25.5×25.5mm Support camera:19*19mm Weight:42.2g(Without propeller guards) INCLUDED: 4…