SPECIFICATIONS Material: PP Color option: Transparent Black Net Weight: 1g Camera angle could adjustable easily Best for Runcam Nano3 INCLUDED 1x Camera Canopy

This Multiprotocol TX Module is suitable for many brand’s quadcopters,helicopters and airplanes .You can control RC quadcopters,RC helicopters or RC airplanes flexibility when you insert the TX Module to your Flysky transmitter. You will get many new ways to control the RC models . Description: Item number:MTXI6 Item name: Multi-protocol TX Module Signal frequency: 2400-2483.5Mhz Controllable range: ≈100m Input voltage: 3.7-4.2V (1S battery) Supported remote controls: Flysky FS-i6 FS-i6…

A 2.4GHz antenna from Happymodel. Made for their ExpressLRS Module, but can work with any 2.4GHz SMA device. Specifications Frequency (MHz): 2400.0 Efficiency (dBi): -2.94 Gain (dBi): 4.18 Efficiency (%): 50.77 Directivity (dB): 7.12 Peak Gain Position (Theta): 0.00 Peak Gain Position (Phi): 270.00 Weight(gram): 5.83 Length(mm)*width(mm): 69*45 Plug type: SMA Includes 1x Happymodel 2.4GHz Moxon antenna

Happymodel Molding JR Bay mounting case for ES24TX and ES915TX ExpressLRS TX module SPECIFICATIONS : Brand Name: Happymodel Materials: Nylon Color: Black Standard JR Bay dimension Weight: 28gram Available for ES24TX ES915TX. Need a bit mod to the aluminum alloy heat sink while use with ES915TX module. Reserved cooling fan installation position, support 20x20x6mm fan. PACKAGE INCLUDES: 1 x Happymodel Molding JR Bay mounting case for ES24TX and ES915TX ExpressLRS TX…

About this product The frame is a replacement or spare for the Happymodel Mobula8. Features Fits the Happymodel Mobula8 85mm Wheelbase Specifications Compatibility: Happymodel Mobula8 Color: Gray (Transparent Black) Max propeller: 51MM Weight: 11.5g Size: 85mm Includes 1x Happymodel Mobula8 85mm Frame

About this product One replacement canopy for the Mobula7. Able to be adjusted for different camera tilts. Specifications Color: Transparent Black Net Weight: 2.2g Material: PC Includes 1x Camera Canopy Set 4 x M1.2*5 Screws

Happymodel has transformed the Mobula7 2s power whoop into an HD “cinewhoop”! With its built-in Caddx Turtle V2 cam, the Mobula7 HD will record high-quality HD footage, while the new CrazyBee F4 AIO FC which supports up to 3S will give you the power you need to get into every nook and cranny! The newly designed V3 frame is tough and will resist damage better than ever before! Note: Current stock has red propellers, not black like the photos. Features New Crazybee F4 PRO V2.0 AIO Fligh…

Specification: Brand Name: Happymodel Model: Mobula6 HD Item Name: Anti-vibration Standoff & Screws Combo Set Application: Original replace part for Happymodel Mobula6 HD FPV Racing Drone Package Included: 4x Long Anti-vibration Standoff 4x Screws

About this product Replacement canopy for the Happymodel Mobula6. Includes 1x Happymodel Mobula 6 Canopy 1x Camera Clip 1x Screw Set

Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot “Mr Shutterbug,” this whoop is one of the lightest 75mm drone in the market! The Moblite7 features the RunCam Nano3, Onboard SPI Frsky D8 Receiver, DiamondF4 FR FC, 5A BLheli_S 4-in-1 ESC, 5.8GHz VTX, and more! This mini and lightweight whoop (75mm) will take you to hard-to-get places! Features The lightest 1s 75mm brushless whoop Powerful and efficiency The lightest 1s AIO 5IN1 F4 flight co…

Happymodel 650mAh 1S Lipo Battery for Moblite7 or related. Specifications Capacity: 650mAh Max. Continuous Discharge Rate: 60C Discharge Lead: 20mm, PH2.0 Dimensions: 60x18x8mm Weight: 16g Includes 1 x Happymodel 3.8V 1S 650mAh 60C LiHV Micro Battery – PH2.0

Frequency: 915 MHz or 868MHz optional Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 1 g Cable Length: 85 mm Width: 42mm~44mm Compatibility: Happymodel ES900RX , TBS CROSSFIRE NANO RX

3D Print lens protector for Mobula8 Materials: TPU Weight: 0.3gram We also provide STL file for download: Lens protector for Mobula8

Sometimes your receiver antennas can get chopped in half in a prop strike or a crash and finding a replacement can be hard without buying a new receiver. Welcome the 2.4GHZ replacement antenna for most FrSky and other receivers on the market now in a 7cm length so no need to worry about having your receiver antennas sticking too far out of your build. Get yours today! IPEX 4 is the smaller type that works on receivers such as R-XSR etc. Please order accordingly. Package Includes 1x Repla…

ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video transmission and 2.4GHz ELRS receiver. They can be integrated into a board for use, or they can be split into independent VTX modules and receiver modules to be used separately. They are all open source solutions that are currently very popular with FPV pilots. Compatible with 20mmx20mm, 30mmx30mm stack mounted way and 25.5mmx25.5mm whoop mounted way. Due to the ultra light weight (only2.1gram), it would be a…

This is a micro flysky compatible receiver that is estimated to give you at around 500m range making it one of the best flysky compatible receivers to use on your FPV quadcopter. This receiver uses the AFHDS-2A and is fully compatible with betaflight/iNav. The diversity antennas give you great range and this receiver also outputs RSSI on channel 14, allowing you to keep an eye on your signal to avoid a out of range failsafe. Key Features – Customized for Betaflight – RSSI Display Via O…

The Happymodel ExpressLRS PWM Kit incudes a 6CH EPW6 900MHz Receiver with two antennas and three 6-pin adapters. Perfect for your Fixed Wing airplane! Features Fixeded Wing Receiver Kit EPW6 900MHz PWM RX 915MHz Antenna 868MHz Antenna BINDING PROCEDURE Supply power to the EPW6 RX, wait until the Green LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the Green LED light will start…

The Happymodel ExpressLRS PWM Kit incudes a 5CH EPW5 2.4GHz Receiver with two antennas and three 6-pin adapters. Perfect for your Fixed Wing airplane! Features Fixeded Wing Receiver Kit EPW5 2.4GHz PWM RX 2.4GHz Antennas BINDING PROCEDURE Supply power to the EPW5 RX, wait until the Green LED on the RX is off, immediately turn off the power, and then repeat again the above steps. When the RX is powered on for the third time, the Green LED light will start to double-f…

The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS. There are three in this series. The PP RX is designed by @Jye Smith from the ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, Happymodel has have developed the Nano 2.4GHz RX of ESP8285 version named EP1 and EP2. The RF module of EP1/EP2 is the same …

The Happymodel 2.4GHz ELRS nano series receiver has an open-source program based on ExpressLRS. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV Racing and Long Range FPV. These are very suitable for Tiny whoops because of the ultra-light and Nano size! The Series There are three in this series. The PP RX is designed by @Jye Smith from the ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a bui…

The Happymodel ExpressLRS F4 is the world’s first AIO 5-in-1 whoop flight controller with a built-in high-performance 2.4GHz ELRS receiver. This F4 flight controller has a built-in 5A ESC, 5.8GHz VTX, and OSD. This AIO is made for 1S long-range and tiny whoops. This FC integrates an SPI-controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter, and Betaflight OSD. Ultra-small size and ultra-stable remote control range can improve the range of the origina…

The ES900TX module is a long-distance 915mhz wireless transmission developed and designed based on the ExpressLRS open-source software. The ES900TX is characterized by ultra-long-range, stable operation, and low latency. This module is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers – basically plug and play. The heat sink has been specially customized for the transmitter module, which can help the t…

The ES900TX and ES900RX modules sets are long-distance 915mhz wireless transmission equipment developed and designed based on the open-source ExpressLRS software. This set of modules is characterized by ultra-long-range, stable operation, and low latency. They are compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers, and are basically plug and play. The heat sink has been specially customized for the tr…

The ES900RX module is a long-distance 915mhz wireless receiver developed and designed based on the open-source ExpressLRS software. This module is characterized by ultra-long-range, stable operation, and low latency. It is compatible with most Opentx remote controllers, especially suitable for Radiomaster TX16S and Jumper T12, T16, and T18 series remote controllers, and are basically plug and play. Note: Radio and TX Not Included VIDEO: Happymodel ExpressLRS 900mhz TX & RX System …