This SMA Antenna is designed specifically for the ES24TX module by Happymodel which is based on the open-source ExpressLRS – a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. Note: This is the Antenna only, with SMA Connector. VIDEO: Happymodel ExpressLRS 2.4 Tutorial Guide Specifications Peak Gain Position (Theta) 180.00 Upper Hem. Efficiency (%) 40.55 Lower …

This Micro TX is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX module is a complete solution that is plug and play and already pre-loaded with Expresslrs firmware. Features ExpressLRS Firmware Plug and Play Low Latency Specifications MCU:ESP32(main),ESP8285 (aux, as espb…

Happymodel ExpressLRS ELRS Fyujon 2IN1 AIO Module Built-in ELRS 2.4GHz EP Receiver OpenVTX 5.8G 48CH 300mW for FPV Toothpick Cinewhoop Drone OVERVIEW: ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video transmission and 2.4GHz ELRS receiver. They can be integrated into a board for use, or they can be split into independent VTX modules and receiver modules to be used separately. They are all open source solutionss that are currently very popular with FPV p…

The Happymodel ExpressLRS CrazyF4 is the world’s first AIO 5-in-1 whoop flight controller with a built-in high-performance 900MHz ELRS receiver. This F4 flight controller has a built-in 5A ESC, 5.8GHz VTX, and OSD. This AIO is made for 1S long-range and tiny whoops. Features Onboard High-performance 900Mhz Serial Based ELRS Receiver Onboard Voltage and Amperage meters World’s first 5-in1 AIO FC w/ Receiver Onboard 4-in-1 ESC F4 Flight Controller Specifications ELRS RECEIV…

This is a 3D Printed JR Bay for the Happymodel ExpressLRS ES24TX / ES915TX. Note: 3D Printed Part only… ES915RX & ES915TX Not Included. VIDEO: HappyModel ES915RX & ES915TX // ExpressLRS // Over 30km! Specifications Color: White Height: 1.29″ Width: 1.94″ Length: 2.5″ Includes 1x 3D Printed JR Bay for the HappyModel ES915RX & ES915TX (White) 1x Hardware Kit 1x Sticky Pad Note: 3D Print only… ES915RX & ES915TX Not Included.

This Lite TX module is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. This module works with the Jumper T-Lite. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX-Lite module is a complete solution that is plug-and-play and already pre-loaded with Expresslrs firmware. Now equipped with a power module to ensure stability in high-powered conditi…

What is a “TX Backpack”? Some of the ExpressLRS TX modules include an additional ESP8285 chip, which lets us communicate wirelessly with other ESP8285 enabled devices using a protocol called espnow. We call this chip the “TX-Backpack”. The aim of the TX-Backpack is to allow wireless communication between ExpressLRS, and other FPV related devices for command and control, or for querying config. Sounds interesting… What type of FPV devices can it talk to? A prime use case is your video recei…

Introduce the World first true diversity 2.4 GHz ExpressLRS Rx with RF amps Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RX ESP32 PICO D4, dual SX1280(SX1281) Antenna connector: IPEX MHF 1/U.FL RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: >19dbm Receiver protocol: CRSF Input voltage: 3.5v~8.4v Recommend +5V DC @ “+” pad PCB size: 19mm x 14mm Weight: 1gram exclude antenna Firmware: ExpressLRS v3.0.0 rc1 or latest version Target: Unified_ESP32_2400_RX, …

This 5-in-1 flight controller is inspired by Happymodel’s Official Pilot – Angry Don FPV ! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller has a built-in VTX, ESC, OSD, and receiver – all on one triangle-shaped whoop board! The 3 corners fit 25.5mm whoop mounting spacing. This is the AIO board included on the ultra-light Happymodel Moblite6/7 whoops. Features Diamond Mounting Pattern – 22.2×22.2×32.7mm Built-in 5V/1A BEC Built-in SPI Frsky Receiver Built-in Betaflight OSD…

This flight controller is inspire from Happymodel Official Pilot “Angry Don FPV“ Flight controller (Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BE…

About this product The Happymodel Diamond F4 AIO 5-IN-1 Flight Controller has a built-in VTX, ESC, OSD, and receiver – all on one triangle-shaped whoop board! The 3 corners fit 25.5mm whoop mounting spacing. This is the AIO board included on the ultra-light Happymodel Moblite6/7 whoops and is inspired by Happymodel’s Official Pilot – Angry Don FPV! VIDEO: Happymodel Diamond F4 Features Diamond Mounting Pattern – 22.2×22.2×32.7mm Built…

These rubber damping balls are shock absorbing and include screws. Compatible with the Happymodel Moblite7. Specifications: Weight: 0.012 kg Used for the Happymodel Moblite7 Includes 4x Long Rubber damping ball 4pcs 4x M1.2*4 Screws

Used for Bwhoop65/ 75 / Mobula7 frames v2/ Mobula7 frames v3 Package include: Short Rubber damping ball 4pcs M1.2*5 Screws 3pcs M1.2*4 Screw 1pcs

About this product One replacement canopy for the Happymodel Mobula8, Bassline Analog/Walksnail, or Crux3. Specifications Brand Name: Happymodel Item Name: Camera Canopy for Crux3 Material: ABS Color option: Transparent black Compatible with CaddxFPV ANT camera Net Weight:1.2g Includes 1 x Camera Canopy 2 x Screws

Frequency: 915 MHz Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: SMA Weight: 6.7 g Cable Length: 85 mm Width: 138 mm(915MHz) Compatibility: ES900TX and ES915TX and ES868TX

Frequency: 915 MHz Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 2.9 g Cable Length: 85 mm Width: 138 mm(915MHz) Compatibility: ES900RX ,TBS CROSSFIRE NANO RX

Brand Name: Happymodel Capacity:300mAh Voltage:11.4v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 65mmx18mmx11mm Weight: 24g Connector: XT30

Capacity:300mAh Voltage:3.8v Continuous Discharge Rate: 30C Instantaneous discharge rate: 60C Size: 57mmx12mmx7mm Weight: 6.5g Connector: PH2.0 Compatible for Mobula6 and Mobula7

EP2 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module SMD Ceramic antenna Frequency Range: 2400 MHz to 2500 MHz Receive refresh rate: 25HZ~500Hz Working voltage: 5v Weight: 0.44 gram Dimension: 10mm*10mm*6mm Peak gain: 3.7dB Default Firmware out of factory: HappyModel_EP_2400_RX V3.0.1 version Built-in a TCXO (temperature compensated crystal oscillator)

EP1 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module Omni directional antenna Frequency Range: 2400 MHz to 2500 MHz Receive refresh rate: 25HZ~500Hz Working voltage: 5v Weight: 0.41 gram(without antenna) Dimension: 10mm*10mm*6mm Peak gain: 2.23dB Default Firmware out of factory: HappyModel_EP_2400_RX V3.0.1 version Built-in a TCXO (temperature compensated crystal oscillator)

The Happymodel 1S Balance Charging Board allows you to charge up to four 1S LiPo batteries with PH2 connector at the same time. The board supports a maximum 1.5A charging current but charge at 1C to be safe. This method of charging is a little safer then parallel charging as it allows the charger to individually monitor and balance each cell. This is a great charger for anyone that would like to charge 1s liPos for your Mobula, Moblite or Mobeetle! Check out our other charging accessories,…

Specification: Brand Name: HaoYe RC Model: X1 Item Name: 229mm Wheelbase H Tpye Racing Frame Kit Wheelbase: 229mm Material: Carbon Fiber Arm Plate Thickess: 5mm Other Plate Thickness: 2mm Standoff Height: 25mm Dimension: 187x206mm Weight: 128g Recommend Parts: Flight Controller: 20x20mm /30.5×30.5mm RF/KISS/F3/F4/F7 FC Brushless ESC: 30-60A Brushless Motor: 2305/2306/2207/2207.5/2407 Motor Propeller: 50XX 5 Inch Propeller FPV Camera: 22mm Mounting Width Camera Lipo Battery: 4S…

Haoye RC – Little Goldfish 4″ FPV Drone from kit Bottom plate: 2mm Frame type: Special-shaped Thickness of splint: 2mm Support blade: 4inch Thickness of top plate: 2mm Wheelbase: 187mm Thickness of side plate: 1.5mm Size: 144*197mm Arm thickness: 4mm Weight: 69G

This is a 3D Printed Go Pro mount from STP Hobby for your Star Power Gunn V2 frame