Summary The SPEEDX2 2107.5 brushless motors are the second generation GEPRC motors designed from scratch. GEPRC SPEEDX2 2107.5 motor is lightweight, has good heat dissipation, and is made of customized high-quality materials.Thanks to the amazing throttle control and advanced engineering design, these motors provide a super smooth flying experience while being super powerful, highly durable and crash resistant. SPEEDX2 2107.5 motors- Perfect for freestyle and racing FPV pilots.Suitable fo…

The GEPRC SpeedX2 2105.5 2650Kv is a high-quality motor especially suitable for 3-4″ Cinewhoops or 4-5″ ultralight copters . The motor weighs only 22 grams , including the 15cm 22AWG cable . Round magnets, high-quality bearings and durable material are a matter of course. The motor uses a classic shaft with an M5 thread . When combined with a 3-4″ propeller, we recommend using 6S batteries. When using a 5″ propeller, a 4S battery is suitable. Key features Size: 2105.5 …

Summary SPEEDX2 1505 4300KV motor, compatible with 2.5-3.5 inch blades. Adopting high-precision and wear-resistant bearings, the motor has a longer service life. Feature The match of matt black and red upscale the exterior appearance. Adoption of high-precision, wear-resistant bearings. Light texture, high-power density. Suitable for 2.5-inch~3.5-inch light-weight drone. Specifications Model：SPEEDX2 1505 4300KV Motor Max Watt：340.9W Peak current：21.56A/3s Interphas…

Summary The SPAN F722-BT-HD v2 stack is specially designed for DJI Air Unit, plug and play, is a flight tower system with F722 chip flight controller and BLheli_32 50A 96K 4 in 1 32-bit ESC, equipped with 42688 -P gyroscope, integrated 512MB on-board SD card and on-board Bluetooth parameter tuning. So as to have a more delicate flying experience. The SPAN F722-BT-HD v2 flight controller supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade of the type…

The SPAN F722-BT-HD v2 flight controller supports direct plug-in the DJI Air Unit, which can save the trouble of soldering. The upgrade of the type-C USB connector greatly improves the life of the socket and reduces the risk of poor contact. F722-BT-HD v2 flight controller can be well matched with BLheli_32 50A 96K 4-in-1 32-bit ESC. It can be used together to achieve perfect flight effect. The flight controller supports various receivers, including Sbus, PPM, CRSF, DSMX, iBus, DUMD and ot…

Summary The GEPRC SOMA 5.8G Directional Flat-Panel Antenna features a high-frequency PCB RF solution, offering a high gain of up to 17dBi and a low average VSWR of 1.5, ensuring excellent signal reception. It’s compatible with various brackets and is built with a durable 1/4 aluminum alloy base. The antenna features a sleek, high-tech design, with an integrated injection-molded casing for superior structural integrity Features Smooth, ultra-thin design. Low VSWR, high gain direction…

Specifications: Model: GEPRC Smoke Stopper Connector: XT30 & XT60 (input and output) Input voltage:1-6S (3 – 30V) Trip current:1.0A Hold current:0.5A Trip time:3ms (Short-Circuit) /10ms (Over-Current) Weight:13.6g How to use it: Normal: led light on There is a short circuit: the light does not shine Disclaimer: This is just a fuse. Something may still break by the time the fuse trips. It won’t protect against all kinds of damages, but it’s still way better than …

Summary RAD VTX 5.8G 2.5W high-power VTX has six adjustable power levels. The maximum power can reach 2500mW, the transmission signal is stable, and the penetrating ability is strong. Double-layer PCB design is adopted to separate the power supply part from the main control, which has strong anti-interference ability and strong heat dissipation ability. It comes with three regional frequency groups, which can be switched at any time, as you choose. IRC Tramp protocol, OSD quick parameter ad…

Summary: I’m glad to introduce the newly developed RAD VTX 1.6W by GEPRC.It is a super-power VTX with a maximum power of 1600MW and five adjustable gears:Pit/25mW/200mW/600mW/1600mW is adopted.The RAD adopts a double-layer PCB design to separate the power supply from the main-board,which can reduce and shield interference. Double layer structure for better heat dissipation. The built-in microphone on the VTX board,supports 7-36V voltage(2-8S Battery) input, uses the mainstream MMCX connec…

Summary GEPRC RAD Tiny 5.8G 400mW VTX is compact and lightweight and can fit into tight spaces. It weighs only 1.1g (excluding antenna). It has 3 adjustable power levels, the maximum power is 400mW, and the signal is stable. With temperature control protection to prevent overheating and burning. IRC Tramp protocol, OSD quick parameter adjustment, one parameter adjustment button, three indicator lights, easy and fast operation. Specifications Model: GEPRC RAD Tiny 5.8G 400mW VTX Input V…

Summary RAD MINI VTX is the latest 1W high-power VTX developed by GEPRC. It has 4 adjustable power levels and a maximum power of 1000mW, with a stable transmission signal, suitable for short and medium-range flight to ensure image transmission quality. RAD MINI adopts 6061 high-strength aluminum alloy housing to assist in heat dissipation, which has stronger impact resistance and better heat dissipation. IRC Tramp protocol, OSD settings adjustment, built-in microphone can provide a real-ti…

A set of 20 GEP propellers, 3 blade style. Parameter： Model: GEP 5X4X3 Manufacturer:GEPRC propeller 5040 x3 Material: PC Length: 5 inch Hub inner diameter(ID): M5 Hub thickness: 7mm Weight: 3.8g Color:black Features: Balance, high efficiency Combining with the latest nut, realize self-locking function Include： 10x 5040 CW/CCW

Summary GEPRC Peano antenna is a 5.8G optimized antenna for FPV quad. The antenna has good gain performance and very compact. Working frequency range is 5600-5950 Ghz, with LHCP and RHCP options for multi-player competition. Peano 5.8G antenna also has a variety of connector options. Every antenna has been tested strictly before leaving the factory to ensure good performance. Features 1. Compact and light-weight design, high quality ABS case for good protection and nice appearance. 2. Op…

GEPRC designed a case, BEC board, and ND16 filter for the Naked GoPro Hero 8 Camera. The case is lightweight and strong and is made of ABS material. This combo includes an ND16 filter to help reduce the light input of the camera sensor without changing the image color. The BEC board is very easy to install and supports 2S-6S voltage input and 5V-2A stable output and perfectly matches the GoPro Hero 8 motherboard. The installation spacing of the base is 24.5mm, which is suitable for various quadc…

The GEPRC team designed a case for the Naked GoPro Hero 8 Camera. The case is lightweight and strong and is made of ABS material. Features Use ABS material with lightweight and high strength The surface is smooth and delicate with oil spray technology Reserved POWER/MODE and REC buttonhole Has SD card anti-pop design to protect the SD card from the pop-up Case includes UV protection lens to protect camera Specially designed for GoPro Hero 8 mainboard and GEPRC BEC board for perfe…

The GEPRC team has specially designed a new BEC Board for the Naked GoPro Hero 8 , which supports 2S-6S voltage input and 5V@2A stable output. It perfectly matches the GoPro Hero 8 motherboard and is easy to install. Save weight with your own naked GoPro and BEC! VIDEO: How to install the GepRC naked Go Pro BEC kit?//The Fantastic BEC Kit teaching video Features Perfect installation of GoPro 8 mainboard, uses BTB interface to connect with stable quality Include GH1.25-3P inte…

Summary The GEPRC team specially designed a new case for Naked Camera GP9/10/11. The front case is processed by high-precision CNC, and the surface is sandblasted and oxidized. The texture is high-grade and beautiful. Sun grain treatment, comfortable and delicate touch. The connection between the BEC module and the main board adopts a reliable and stable FPC flexible cable connection to prevent poor contact. The module adds a 3.3V power supply and is assembled with a cooling fan. BEC support…

Summary: GEPRC team specially designed a new BEC board for GP8, which supports 2S-6S voltage input and 5V@2A stable output. It perfectly matches GP8 motherboard and is easy to install. Specifications: Model: GEPRC Naked Camera GP8 BEC Brand name: GEPRC Color: Black/Blue Input: 2S-6S Output: 5V@2A Connector: GH1.25-3P connector Size: 36mm*31.5mm/26.5mm Weight: 1.7g Features: Include GH1.25-3P interface, and the control cable is connected with plug and play Use cont…

Summary The GEPRC Momoda2 4.9G DUAL antenna features a dual RF solution with a gain of up to 3.65dBi, providing comprehensive signal coverage and effectively reducing FPV image instability caused by signal dead spots. This antenna is ideal for video transmission solutions within the 4.9GHz-5.3GHz frequency band. Features Stylish mechanical design with visual appeal. Compact dual RF solution with ultra-high gain. Superior signal coverage with no dead zones. Each antenna undergo…

Suitable Model: MK5D-LR7 Frame MK5D-LR7

The MATEN 5.8G 3W VTX PRO is a high-performance VTX newly developed by the GEPRC team. With five adjustable power options and a dual-core design, it delivers up to 3000mW of power, ensuring stable signal transmission and excellent penetration. Built with a high-strength CNC aluminum alloy shell, the MATEN 5.8G 3W VTX PRO offers superior heat dissipation and impact resistance. Its sleek design features a fan cooling function for optimal performance, while the built-in microphone transmits real-…

Summary The MATEN 5.8G 2.5W VTX PRO high-power image transmission newly developed by the GEPRC team is now officially released. Its performance is very powerful, with 5 adjustable power levels and a maximum power of up to 2500mW. The transmission signal is very stable and the penetration ability is excellent. MATEN 5.8G 2.5W VTX PRO uses high-strength aluminum alloy CNC shell to assist heat dissipation. The unique appearance design and active fan cooling provide stronger impact resistance an…

Specifications Model: GEPRC MATEN 3.3G VRX with 3.3G Signal Alarmer Dimension: 52.3×87.5×14.7mm Frequency: 3083-3480MHz Channels: 40CH Input Voltage: DC12-36V(3-8S Battery) Antenna Connector: SMA Sensitivity: -98dBm Modes: VRX Mode, SCAN Mode Video Connector: 3.5mm coaxial Power Input: DC3.5mm/1.35mm Mounting Hole: 1/4″ threaded hole Weight: 69g Frequency Bands A:3083，3114，3145，3176，3207，3238，3269，3300 B:3215，3235，3255，3275，3295，3315，3335，3355 C:3170，3190，3210，3…

Features Operates in the 3.3GHz frequency, up to 3000mW, suitable for long range flight The well-chosen high-strength aluminum alloy CNC shell assist heat dissipation The built-in micro turbofan dissipates heat actively Wide voltage input supports 12-36V input One function adjustment buttons, three indicator lights, easy to operate. VTX control protocol IRC Tramp supports OSD parameter adjustment. Temperature control protection function prevent overheat Supports 40 transmission…