Summary GEP-Camera damping ball is a shock-absorbing damping ball specially designed for camera gimbal equipment.In order to solve the vibration and camera jello, it is made of high-quality silicone material to provide a more stable and smooth video shooting experience.It is easy to install, high toughness. GEP-Camera damping ball allows you to easily obtain high-quality, stable and smooth video images. Specifications Name: GEP-Camera Damping Ball Weight: less than 0.1 grams per ball …

Summary GEP-C1 charger is the second generation 1s high-performance charger newly developed by GEPRC.GEP-C1 charger is very convenient and easy to use.It supports Type-C input and can charge up to two 1S high voltage batteries at the same time,and each channel is up to 1A, charging speed is very fast, with trickle charging function. At the same time, the charger also integrates with a buzzer, which will alarm when fully charged, allowing pilots to unplug the battery in time and replace it wi…

Specifications Input Voltage：3-6S Lipo Galvanometer：Support Continuous Current：60A Burst Current：65A（5 seconds） Support Protocol：Dshot 150/300/600 Size：42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle. Weight：13.7g Target：G_H_30 Includes 1 x ESC 1 x Capacitor 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x Silicone grommets

Specifications Input Voltage：3-6S Lipo Galvanometer：Support Continuous Current：50A Burst Current：55A（5s） Support Protocol：Oneshot125/Oneshot42/Mulishot modes Dshot 150/300/600 Size：42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle. Weight：13.7g Target：G_H_30 Includes 1 x ESC 1 x Capacitor 1 x Flight Controller Adapter Cable 1 x XT60 Power cable 4 x Silicone grommets

Introduction GEPRC G3045 3inch propellers have got through a lot of performance optimization and adjustment, Strong runtime performance in the racing and Freestyle flight. G3045 propeller is very strong and durable. Compared with the same size propeller, it has better flexibility and durability. The optimized airfoil propeller design is not easy occurring such as blade flutter and Jelly phenomenon when the quadcopter’s flight attitude changes greatly.With reliable quality guaranty system to c…

While there exists a number of larger FPV backpacks, there is a need for smaller, more portable bags in FPV! GEPRC filled this niche and designed a wonderfully compact, yet thought-out field bag that can store your FPV accessories like FPV goggles, radios, props, etc! A handy shoulder strap makes it easy to carry! Specifications Dimensions: 11.5x 8 x 6.5 inches Weight: 530 Grams (1.14lbs) Length: 280mm Width: 180mm Height: 200mm Color: Gray Includes 1x GEPRC Flybag

Feature New EM series motors designed for long-range FPV High-strength M6 steel shaft High torque magnetic circuit design Specifications Model: EM4218 350KV Motor KV: 350KV Max Watt: 1800W Peak Current: 60A Interphase Resistance: 50mΩ Propeller: 13-15inch Propeller Magnet: N52H Bearing Type: NMB Configuration: 12N14P Dimension: φ49mmx40.1mm Shaft Diameter: φ6mm Shaft Protruding Length: 22.9…

Feature New EM series motors designed for long-range FPV High-strength M6 steel shaft High torque magnetic circuit design Specifications Model: EM4214 660KV Motor KV: 660KV Max Watt: 2120W Peak Current: 90A Interphase Resistance: 25mΩ Propeller: 12-14inch Propeller Magnet: N52H Bearing Type: NMB Configuration: 12N14P Dimension: φ49mmx32.5mm Shaft Diameter: φ6mm Shaft Protruding Length: 25.…

Features New EM series motors，mainly designed for long range FPV. High-strength M5 steel shaft High torque magnetic circuit design 19mmx19mm base Specifications Model: EM3115 900KV Motor Max Watt: 1620W Peak current: 65A Interphase resistance: 46mΩ Propeller: 8-10inch Propeller Magnet: N52H Bearing type: NSK/NMB Configuration: 12N14P Dimension: φ37.5mmx30mm Shaft Diameter: φ5mm Shaft Protruding Length: 16mm Mounting holes: 19mmx19mm Lead: 310mm/18AWG …

Feature New EM series motors，mainly designed for long range FPV. High-strength M5 steel shaft High torque magnetic circuit design 19mmx19mm base Specifications Model: EM3110 900KV Motor Max Watt: 1480W Peak current: 57A Interphase resistance: 74mΩ Propeller: 8-10inch Propeller Magnet: N52H Bearing type: NSK/NMB Configuration: 12N14P Dimension: φ33mmx26.1mm Shaft Diameter: φ5mm Shaft Protruding Length: 16mm Mounting holes: 19mmx19mm Lead: 310mm/18AWG E…

Feature New EM series motors，mainly designed for long range FPV. High-strength M5 steel shaft High torque magnetic circuit design 19mmx19mm base Specifications Model: EM2807 1350KV Motor Max Watt: 1080W Peak current: 47A Interphase resistance: 45mΩ Propeller: 6-8inch Propeller Magnet: N52H Bearing type: NSK/NMB Configuration: 12N14P Dimension: φ33mmx20.1mm Shaft Diameter: φ5mm Shaft Protruding Length: 16mm Mounting holes: 19mmx19mm Lead: 260mm/18AWG …

Summary GEPRC ELRS NanoSE receiver is a new generation remote control system developed based on the ExpressLRS open source project. ExpressLRS sets new standartds for long-range connection, low latency and Maximum refresh rate of 500Hz. GEPRC ELRS NanoSE receiver operates at a frequency of 2.4 GHz. Compared with Nano receiver, NanoSE receiver uses an Integrated SMD ceramic antenna, which further reduces its size while ensuring signal reception, making it more suitable for use on drones w…

Summary GEPRC ELRS Nano 915M V2 Receiver is a new generation receiver system based on ExpressLRS open source project.ExpressLRS features long range operation, low latency, and low price. The ELRS Nano 915M V2 Receiver uses a TCXO temperature compensated crystal oscillator to avoid frequency shifts caused by temperature changes;the telemetry power is up to 50mW; Built-in WIFI antenna, firmware upgrade operation through WIFI. Feature 17x11mm Small size 0.7g weight WIFI Upgrade firm…

Summary The GEPRC ELRS Nano 915M PA500 receiver is an advanced reception system based on the ExpressLRS open-source project. ExpressLRS offers long-range operation, low latency, high refresh rates, and affordability. The ELRS Nano 915M PA500 receiver features a TCXO (temperature-compensated crystal oscillator) to prevent frequency shifts caused by temperature changes. It adopts an integrated high-power PA chip, boasting a telemetry power of up to 500mW. It features a built-in WIFI antenna, f…

Summary The GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver is a new Dual-Band system developed from the ExpressLRS open-source project. It is designed based on Semtech’s third-generation LR1121 RF chip, supporting 150 – 960MHz (sub-GHz) and 2.4GHz bands for Dual-Band transmission. The ELRS Nano 915M/2.4G Dual-Band Receiver features dual LR1121 chips, allowing easy switching between 915M , 2.4G when paired with 915M/2.4G antennas. It is fully compatible with existing 915M and 2.4G ELRS TX modul…

Summary GEPRC ELRS Nano 2.4G PA100 Receiver is a new generation of 2.4G receiver system based on ExpressLRS open source project.ExpressLRS features long range operation, low latency, maximum 1000Hz refresh rate, and low price. The ELRS Nano 2.4G PA100 Receiver uses a TCXO temperature compensated crystal oscillator to avoid frequency shifts caused by temperature changes;Integrated PA+LNA,the telemetry power is up to 100mW; Built-in WIFI antenna, firmware upgrade operation through WIFI. Feat…

About this item ELRS Dual 915M PA500 Diversity Receiver High-Power 500mW WIFI TCXO for RC FPV Quadcopter Longrange Freestyle Drone Parts ELRS 915M PA500 Diversity Receiver for RC FPV Quadcopter Drone Parts Optimized performance: Equipped with a high-power PA chip, it ensures strong signal strength and reliability for your FPV quadcopter project. Enhanced power output: With 500mW power output, this receiver improves the range and responsiveness of your drone, making it ideal for long-ra…

Summary The GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver is a new dual-band system developed from the ExpressLRS open-source project. It is designed based on Semtech’s third-generation LR1121 RF chip, supporting 150 – 960MHz (sub-GHz) and 2.4GHz bands for simultaneous dual-band transmission. The ELRS 915M/2.4G Gemini Xrossband Receiver features dual LR1121 chips, allowing easy switching between 915M Gemini, 2.4G Gemini, and dual-band 915M+2.4G modes (requires dual-band TX module support) w…

Summary With the launch of the DJI O4 Air Unit Pro, we’ve introduced filters designed specifically for its lens. These filters help manage bright light and offer creative options for motion and long-exposure shots, choose from a range of filters to elevate your shots. Feature Aluminum alloy frame, tough against dirt and scratches. Multi-layer protection: scratch, dust, oil, and corrosion resistant. The ultra-clear lens with minimal color distortion for true-to-life colors. Multi-co…

Specifications Material: 6061 aluminum material Weight: 4.2g Size: 31mm*31mm Colour: Black Includes 1×GEPRC DJI O3 Cooling Fin 1×Thermal Grease 4×Long Screws(M2*5) 4×Short Screws(M1.6*8) 4×Short Screws(M1.6*10)

Summary The O3 Air Unit ND filter, ingenuity designed by GEPRC team, has two mounting methods to solve filter mounting problems. Also adapted to DJI AVATA, a variety of filter effects, suitable for a variety of daylight effects to improve image quality. Feature 1. Aluminum alloy sturdy frame, no fear of dust and scratches. 2. Two types of installation, to solve the frame lens filter installation trouble. 3. Multi-protection: scratch-proof, dust-proof, oil-proof, effective protection of…

Summary The GEP-CT25 frame adopts the avant-garde design and is injection molded with advanced material, taking into account the outstanding rigidity and flexibility. The interior VTX design makes the O3 memory card installation and footage loading through a USB connection easier. Adopting exposed design for receiver antenna. Full-fit aluminum components and straps ensure the battery is firmly fixed. The fixed prop of the injection molding receiver is perfectly matched with the height of the…

Summary： The CineLog35 Frame developed by CEPRC for mounting GoPro camera is now officially released. CL35 is improved and developed on the basis of CL30. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with VISTA HD image transmission.The propeller guard adopts an integrated design, and the overall structure is firmer.Upgrade the power system, choose the 12mm x 12mm motor hole position, c…

The latest 3-inch rack CL30 developed by GEPRC is now officially released. CL30 is improved and developed on the basis of CL25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with the mainstream FC AIO and VISTA and most of the analog VTX on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. Improved the shock absorption design of the damping platform to pr…