GPS drone part repairing

GPS drone part repairing

GPS modules on long-range quads and wings fail from crash impact, water, and torn UART wires. We inspect the ceramic patch, compass (if present), and 5 V rail. A module that never gets a lock outdoors may be an antenna, a baud mismatch, or a dead GNSS chip — we do not guess from a photo alone.

This drone part repairing page is only for this part family. Use it if the board matches the heading — not as a generic “any drone repair” page. Mail-in is India-wide; the bench is in Jaipur. Repairability is decided after inspection, not from a photo alone.

Typical faults we see

# Symptom or damage
1 Zero satellites outdoors
2 Long time to first fix
3 Compass not healthy
4 UART not detected
5 Bent or cracked ceramic
6 Water under the can
7 5 V pad burnt
8 Cable torn at the connector

Process for this service

Step What we do
1 Photos of the GPS, cable, and mount
2 Ship the module
3 5 V and UART check
4 Ceramic and compass inspection
5 Estimate vs a new GPS
6 Your approval
7 Connector or regulator work
8 Sky-view lock test when the chip is alive

What we do and do not repair

A shattered ceramic or a GNSS die with no replacement stock is usually replace. We will not “retune” a module that has no hardware fault.

Talk to a technician

Named technicians at the Jaipur bench. A card only appears when WhatsApp or a page link is set in admin.

Prdeep

Prdeep

Builder & Technician

  • FC & ESC Repair
  • SMD/PCB Repair

FPV Drone Builder & Electronics Repair Technician – FPV Drone Assembly, FC/ESC Repair, Soldering, PCB/SMD Rework, Circuit Troubleshooting, Firmware Configuration, Motor/Power System Diagnostics, VTX/GPS/Receiver Installation & Component-Level Electronics Repair.

Meet our team

Diagnosis & charges

We inspect the PCB and components before quoting. Inspection fee ₹199.00 is adjusted if you approve the repair.

30-day repair warranty on the work performed. It does not cover new crash damage, water damage, over-voltage, or a new short circuit after return.

Shop related parts

GPS modules · Custom build · 3D printing

Frequently asked questions

My GPS shows 0 sats in the workshop. Is it dead?

Indoors almost every module shows 0. We test with a sky view. Still send it if it also fails outside.

Do you repair GPS+compass combos?

Yes. Tell us the model (for example BN-880 class or a compact FPV GPS) on the form.

Can you replace only the cable?

If the board is healthy, a cable or JST is often the whole job.

Is this for DJI camera-drone GPS?

Consumer DJI Mini/Air GPS is usually not a separate mail-in board. This page is for FPV and RC aircraft GPS modules.

Will you configure GPS_1 baud after repair?

We confirm the module talks. You set ports in Betaflight or INAV for your build.

Other drone part repairing pages

My Cart

Cart Page

My Wishlist

Wishlist Page

We may use cookies or any other tracking technologies when you visit our website, including any other media form, mobile website, or mobile application related or connected to help customize the Site and improve your experience. Read our cookie policy