Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging With LC filter Changelog Jan. 12, 2024 : Gyroscope changed from BMI270 to ICM42688. Product name updated to BLITZ F7 V1.2 Flight Controller Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs:…

PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging – With LC filter Changelog: – 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000. Specifications: MCU: STM32 F722 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS…

PRODUCT DESCRIPTION FC // BLITZ F7 V1,1 Flight Controller Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging – With LC filter Changelog: – 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000. Specifications: MCU: STM32 F722 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456…

Note When using this ESC on a 7-10 inch drone, please add an additional capacitor to prevent overloading the onboard capacitor of the ESC. This precaution will help ensure optimal performance and reliability of your drone’s power system. Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging With LC filter Changelog Jan. 11, 2024 : Gyrosco…

PRODUCT DESCRIPTION Top Features of iFlight Blitz F7 Pro: – Improved circuit design, better components, and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging – 512MB BlackBox – With LC filter Specifications of iFlight Blitz F7 Pro: Mount pattern: 35*35mm/ 4mm PCB hole diameter Smartaudio / IRC Tramp VTX protocol supported Firmware target: IFLIGHT_BLITZ_F7_PRO Input Voltage: 14.8V-34V (4S-8S LIPO…

Description The MOSFET used by BLITZ E80 is PSMN1R0-40YLD, which can withstand a continuous current of 80A at 25°C, with a maximum power dissipation of 198W. BEC power supply adopts TI automotive-grade dedicated synchronous rectifier chip, supporting up to 100V. The 1-4 layer power board of the PCB circuit is ultra-thick copper with a thickness of 4OZ, ensuring continuous output under high-power operation. The STM32F051 main control processor with a running frequency of up to 48MHz, …

PRODUCT DESCRIPTION Specification: – Mounting Holes: 30.5*30.5mm/Φ4mm – Weight: 15.3g – Supports 2-6S lipo input – MCU：G071 – Constant: 55 Amps – Burst: 65 Amps – Current sensor: Yes – BEC: No – Current rate: 200 – Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. – Target: IFLIGHT_BLITZ_G2 Package Included: – BLITZ E55S 4-IN-1 2-6S ESC * 1pc – Power cables & ESC signal wires * 1set

This Blitz F745 HD 20A AIO with OSD board is only for Iflight Defender 25 . This is the new generation F7 AIO equipped with an ICM42688P gyro, a 32MB blackbox and a DPS310 barometer. FC MCU: STM32F745 Gyro: ICM42688P Blackbox: 32MB Onboard Flash BEC output: 5V 2.5A WS2812 LED Strip: Yes Buzzer: Yes Barometer: DPS310 Connector: SH1.0 to Type-C adapter OSD: Yes FC Firmware：IFLIGHT_BLITZ_F7_AIO Mounting pattern: 25.5*25.5mm φ3mm Dimensions: 32.5*32.5mm…

Compatibility 1. This AIO without OSD Chip, it made for Defender 25 HD VTX only. 2. Bigger size than the BLITZ Whoop BGA F7 AIO. Description This is a new generation F7 AIO designed for Defender 25. A future-proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work. Solder your motor wires on and let’s go! Highlights Pass-through DJI O3 and Caddx Vista/Polar Connector M…

PRODUCT DESCRIPTION The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (6 to 35V). * Short connect ON-12V, the output voltage is 12V. When disconnected, the output voltage is 5V. Features of iFlight B…

FC Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A Changelog November 6, 2023 : The fligh…

Specifications MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A Changelog November 6, 2023 : The flight c…

PRODUCT DESCRIPTION Features: – Stable output power – 4 Power levels up to 1600mW; – 40 Channels (including Raceband) – Fast frequency lock, no startup interference with other pilots – Built-in output power self-check functionality – VTX telemetry with IRC Tramp protocol Tips: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX …

PRODUCT DESCRIPTION This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra powerful Mosfets for almost any build. Solder your motor wires on and let’s go! DJI Plug&Play plug and so many UARTs most pe…

What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25×25 whoop size board? That would be crazy right? Well, we just did it… This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chipsets instead of ordinar…

PRODUCT DESCRIPTION What if you could get the combined MCU speed and ESC power of a big stack, but carefully arranged on a 25×25 whoop size board? That would be crazy right? Well, we just did it… This is our new iFlight BEAST series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight etc. Lightweight, minimum size, minimum work.This could only be achieved by using BGA chips…

Description The AOS HS5 is the ultimate in speed and precision, delivering lightning-fast acceleration and blistering top speeds over 200 mph (320 kph) to capture every moment with breathtaking clarity. Changelog Feb. 13, 2025 : Frame Kit upgraded to be compatible with DJI O4 Pro Air Unit. Features Immersive 155° FPV Experience Immerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera with no props in view. This expansive view …

For filmmakers who demand more power and stability, the AOS Cine35 V5 offers a robust solution, supporting up to 3.5″ props. Features Flexible battery mounting With options for lengthwise or toilet tank battery mounting, the AOS Cine35 V5 makes it easy to balance your drone’s center of mass, regardless of your camera setup. Captive battery straps ensure quick and easy battery swaps, so you can spend more time in the air. Immersive 155° FPV Experience Enjoy an expansive 155-…

Description The latest version of this frame is the AOS Cine35 EVO. It has updated camera plates to support the DJI O3 Air Unit as well as all other 19-20mm FPV cameras. Features Designed for 3.5 inch props, no props in view. 4 mm Truss Arms Up to three 25.5 or 20 mm stacks (front, center and rear) One 30.5mm stack (center) 32x32mm GoPro mounting holes in top plate with installed press-nuts XT60 pass through top plate Captive battery strap slots for lengthwise or toil…

The AOS Cine25 V5 is a top-tier frame for building a compact 2.5″ cinewhoop drone. It features carbon fiber propeller guards that are both strong and lightweight. The drone can be built with either analog or digital video transmission, including support for DJI O3 and O4 Pro . The camera is mounted in aluminum side plates . The FPV camera is positioned far forward enough that no parts of the frame are visible in the FPV feed, even with up to 155° FOV. This is especially appreciated…

Description The latest version of this frame is the AOS Cine25 EVO. It has updated camera plates to support the DJI O3 Air Unit as well as all other 19-20mm FPV cameras. Features Designed for 2.5 inch props, no props in view. 2.5 mm Truss Arms Up to two 25.5 or 20 mm stacks (front and rear) One 25.5 or 20 mm stack (center) 32x32mm M2 GoPro mounting holes in top plate with installed press-nuts XT30 pass through top plate Captive battery strap slots for lengthwise or to…

Introducing the AOS UL7 – the ultimate ultralight 7 inch FPV drone frame with a revolutionary design. The UL7 uses a vertical truss arm structure that is super-light and super-stiff, providing maximum flight performance for the smoothest footage whilst saving weight to increase the flight time. The latest version of this frame is the AOS UL7 EVO. It soft mounts the FPV Camera, supports ND filters with DJI O3, and fits 14-20mm FPV cams. The AOS UL7’s revolutionary design is optimized to deliv…

Features Upper(middle) plate thickness: 2.5mm Bottom plate thickness: 2 mm Top plate thickness: 2mm Arm Thickness: 8mm Packing List 1x Replacement parts for AOS 7 EVO V1.2 Frame (optional)

Description Lose the GoPro and experience an unparalleled mix of speed, power, and agility. Designed with cutting-edge patent pending technology and premium materials, here’s why the iFlight AOS 4 V5 Frame is the ultimate choice for drone enthusiasts. Changelog Mar. 11, 2025 : Frame Kit updated to be compatible with DJI O4 Air Unit and DJI O4 Air Unit Pro. Features Metal Camera Cage The AOS 4 V5 is equipped with an ultra-durable 7075 Aluminium Camera Cage that accom…