This motor is specially designed for BOB57 Cinematic LR & Freestyle 6inch BNF The smooth, reliable and powerful motors were upgraded and we achieved an even higher standard in our manufactory as well as better performance than ever before. New center slotted N52H curved arc magnets were introduced to drastically reduce response time of the motor! Maybe the biggest bottleneck of our FPV flight controller is the motor due to it’s translation delay of it braking and accelerating. This motors of…

Description Our high-quality flight controller, designed specifically for Fixed Wing UAV enthusiasts, is compatible with Betaflight, INAV, and Ardupilot. This controller is tailored to meet the needs of hobbyists who are passionate about model aviation, providing a reliable and efficient solution for their aircraft. With advanced features and compatibility with popular software platforms, our flight controller offers a superior flying experience for enthusiasts looking to take their Fixed Wi…

Features of BLITZ Whoop F7 AIO Separated Flight Control board to minimize electrical gyro noise Pass-through DJI O3 and Caddx Vista/Polar Connector FC PCB can be disassembled from the ESC PCB; Repair allowed! MCU: BGA-STM32F745, 216MHz OSD: AT7456E Blackbox: 16MB Onboard Flash Gyro: ICM42688 Changelog December 26, 2023 : The gyro was changed from BMI270 to ICM42688. FC Specifications MCU: BGA-STM32F745 Gyro: ICM42688 Blackbox: 16MB Onboard Flash BEC …

Specifications Size: 30.5*30.5mm Mounting pattern: 25.5*25.5mm/φ3mm Weight: 7.5g MCU: STM32F411 Gyro: BMI270 Blackbox: 8MB BEC output: 5V 2A Config：IFLIGHT_F411_PRO.config INA pad: nR2 Barometer: No Constant current: 20A，25A（Burst） Input: 2-4S Current sensor: yes BLHeli: BLHeli-S ESC Telemetry: no Firmware Target: IFLIGHT_F411_PRO ESC Firmware: Bluejay Q-H-50 Packing List 1 x BLITZ Whoop AIO F411

Features Built-in microphone 4 Power levels up to 2500mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality The CNC cooling casing, along with an integrated cooling fan, offers a dual heat dissipation effect. Tips VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies…

Features Stable output power 4 Power levels up to 1600mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality VTX telemetry with IRC Tramp protocol Tips VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your r…

Description GPS specially designed for Defender25. Features UBLOX M10 chip Built-in farad capacitor for faster hot start Onboard LNA (Low Noise Amplifier) 10 Hz Refresh rate Built-in Flash The split antenna design enables the antenna to be hidden inside the drone Specifications Baud Rate: 4800bps-115200bps (Default – 115200bps) Sensitivity: Tracking: -167dBm Cold start: 60s Hot start: 1s Maximum height: 50000m Maximum speed: 500 m/s Speed accurac…

Always worried about poor soldering and wasting expensive electronics? Well, Here it is the Blitz Practice Board Soldering Board , which will help steady that hand and give you perfect solder jobs in no time! The Practice Soldering Board replicates almost every common type of solder joint in the FPV world. You can practice tiny pin and pad soldering or larger gauge wire soldering. Specifications: Dimensions: 40*100mm Weight:13.8g/pc Layers: 2 Thickness: 1.6mm Solder mask color: ink g…

Features Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware FC Specifications MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 20*20mm/φ4 Di…

Features Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware Specifications MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Y…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Changelog October 20, 2023 : Flight control Blackbox flash capacity changed from 16MB to 8MB April 6, 2024 : The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Ch…

PRODUCT DESCRIPTION Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging Changelog: – 2022/Feb: Version updated to V1.1 / Gyro changed to Bosch BMI270 due to availability & price issues with MPU6000. Specifications: MCU: STM32 F722 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456 Flash: 16MB (Blackbox flash) UARTS: 6 Mot…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Changelog October 20, 2023 : Flight control Blackbox flash capacity changed from 16MB to 8MB April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. FC Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD…

FC Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging FC Specifications MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456 Flash: 8MB (Blackbox flash) UARTS: 6 I2C serial: SDA/SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Mount …

PRODUCT DESCRIPTION FC // BLITZ Mini F4 Flight Controller Top Features: – Improved circuit design, better components and lower electrical noise! – DJI HD VTX Connector (Plug-and-Play / No soldering required) – FC indicator LEDs for visual debugging SPECS: – MCU：STM32F405 – GYRO：MPU6000 – BARO: NO – BETAFLIGHT OSD: IFLIGHT OSD （AT7456E) – BLACKBOX: 16MB – UARTS: 6 – I2C SERIAL: SDA / SLA PADS – SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED – LED C…

Specifications Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2-6S lipo input MCU: BB21 Constant: 55 Amps Burst: 65 Amps Telemetry Output: No Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target: Q-H-25 16.7(BlheliS) / Bluejay Q-H-50 (Bluejay) Packing List 1 x BLITZ Mini E55S 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires

PRODUCT DESCRIPTION Specification: – Dimension: 35*42mm – Mounting Holes: 20*20mm/Φ4mm – Weight: 11.3g – Supports 2-6S lipo input – MCU：BB21 – Constant: 55 Amps – Burst: 60 Amps – Current sensor: Yes – BEC: No – Current rate: 100 – Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. – Target: QH-50 16.7 Wiring Diagram: Package Included: – BLITZ Mini E55S 4-IN-1 2-6S ESC * 1pc – Power cables & ESC signal wires * 1set

Changelog BLITZ Mini E55 4-IN-1 ESC V1.3 – Metal Mosfets (Jan-28,2023) Description The next generation of ESCs from iFlight has arrived. Currently being used in their BNF quads such as the Nazgul F5/F6 Series BNF. These new 55 Amp BLHeli 32 BLITZ Mini 4-in-1 ESCs can handle even the most amp-hungry motors. Specifications Product Name: BLITZ Mini E55 4-IN-1 ESC Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 60A MCU: G071 BEC: No Firmwa…

FC Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27mm Weight: 5g BEC: 5V 2.5A ESC Specifications Mounting Holes: 20*20mm/Φ4mm Weight: 11.3g Supports 2…

Specifications MCU: AT32F435RGT7 Gyro: BMI270 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27mm Weight: 5g BEC: 5V 2.5A Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4…

Features UBLOX M10 chip Compass module QMC5883L integrated Built-in farad capacitor for faster hot start Onboard LNA (Low Noise Amplifier) 10 Hz Refresh rate Built-in Flash High sensitivity 18x18mm GPS patch antenna, low power consumption, strong signal, lightweight. Specifications Compass module: QMC5883L Baud Rate: 4800bps-115200bps (Default – 115200bps) Sensitivity: Tracking: -167dBm Cold start: 26s Hot start: 1s Maximum height: 50000m Maximum spe…

Description Introducing the BLITZ H7 Pro Flight Controller – a powerhouse with a dual-sided shielding design that not only protects against interference but also safeguards the controller from debris, ensuring seamless operation. The detachable shielding allows for easy TF card replacement. Upgraded with a robust STM32H743 MCU, it supports input voltages up to 12S and is compatible with ArduPilot firmware, offering customers endless possibilities. Upgrade to the BLITZ H7 Pro for unparalleled…

Description Small size but big power! The iFlight BLITZ Micro Force is the VTX you need for your next Micro build. Small enough to fit into smallest frames, but enough power to get some signal through some of those dense trees. Switchable from 25mW up to 600mW with excellent Power output stability. PIT mode also allows you to power up your quad with pilots nearby without stomping on their frequency. Tips VTX is set to 25mW by default! Power levels above 2…

Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware Specifications MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 30.5*30.5mm Dimen…