About this product The Happymodel X12 Lite V1.0 Flight Controller comes with an onboard SPI ELRS receiver which supports ELRS TX module 2.0 firmware, and also provides other receiver options like SPI Frsky D8/D16, RED PINE, and SFHSS. This is an amazing flight controller for brushless whoops that will give you an incredible range for your next FPV build. Note: This Lite version comes without the onboard VTX. Features Built-in ExpressLRS 2.4G with an…

This X12 flight controller is all-in-one and consists of a 12A ESC as well as an OPENVTX . SPECIFICATIONS Betaflight firmware target : CRAZYBEEF4SX1280 RX antenna : SMD ceramic VTX antenna : UFL Amperage meter scale : 470 Weight : 5.1g Size : 30*30*8mm RF Frequency: 2.4GHz Antenna : SMD antenna Telemetry output Power: <12dBm Receiver protocol: SPI ExpressLRS Compatible with ExpressLRS V2.0 TX Module Couldn’t flash separately ExpressLRS firmware…

About this product The Happymodel Pancake AIO is an amazing combination of a flight controller, receiver, and video transmitter! Mounting options include both 30.5mm and 20mm spaced holes. VIDEO: Pancake AIO FC – Happymodel Features 30.5 x 30.5mm or 20x20mm Mounting Pattern ONBOARD SPI EXPRESSLRS 2.4GHZ ONBOARD 5.8GHZ OPENVTX CRAZYBEEF4SX1280 FC 2-S6S Lipo Input Betaflight OSD MPU 6000 SPI 48 Channels Specifi…

ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video transmission and 2.4GHz ELRS receiver. They can be integrated into a board for use, or they can be split into independent VTX modules and receiver modules to be used separately. They are all open source solutions that are currently very popular with FPV pilots. Compatible with 20mmx20mm, 30mmx30mm stack mounted way and 25.5mmx25.5mm whoop mounted way. Due to the ultra light weight (only2.1gram), it would be a…

The Happymodel ExpressLRS F4 is the world’s first AIO 5-in-1 whoop flight controller with a built-in high-performance 2.4GHz ELRS receiver. This F4 flight controller has a built-in 5A ESC, 5.8GHz VTX, and OSD. This AIO is made for 1S long-range and tiny whoops. This FC integrates an SPI-controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter, and Betaflight OSD. Ultra-small size and ultra-stable remote control range can improve the range of the origina…

Happymodel ExpressLRS ELRS Fyujon 2IN1 AIO Module Built-in ELRS 2.4GHz EP Receiver OpenVTX 5.8G 48CH 300mW for FPV Toothpick Cinewhoop Drone OVERVIEW: ELRS Fyujon is a very simple and easy-to-use 2-in-1 module that integrates 5.8GHz video transmission and 2.4GHz ELRS receiver. They can be integrated into a board for use, or they can be split into independent VTX modules and receiver modules to be used separately. They are all open source solutionss that are currently very popular with FPV p…

The Happymodel ExpressLRS CrazyF4 is the world’s first AIO 5-in-1 whoop flight controller with a built-in high-performance 900MHz ELRS receiver. This F4 flight controller has a built-in 5A ESC, 5.8GHz VTX, and OSD. This AIO is made for 1S long-range and tiny whoops. Features Onboard High-performance 900Mhz Serial Based ELRS Receiver Onboard Voltage and Amperage meters World’s first 5-in1 AIO FC w/ Receiver Onboard 4-in-1 ESC F4 Flight Controller Specifications ELRS RECEIV…

This 5-in-1 flight controller is inspired by Happymodel’s Official Pilot – Angry Don FPV ! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller has a built-in VTX, ESC, OSD, and receiver – all on one triangle-shaped whoop board! The 3 corners fit 25.5mm whoop mounting spacing. This is the AIO board included on the ultra-light Happymodel Moblite6/7 whoops. Features Diamond Mounting Pattern – 22.2×22.2×32.7mm Built-in 5V/1A BEC Built-in SPI Frsky Receiver Built-in Betaflight OSD…

This flight controller is inspire from Happymodel Official Pilot “Angry Don FPV“ Flight controller (Flysky SPI RX version)DiamondF4 FS FC Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Original whoop size compatible Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BE…

About this product The Happymodel Diamond F4 AIO 5-IN-1 Flight Controller has a built-in VTX, ESC, OSD, and receiver – all on one triangle-shaped whoop board! The 3 corners fit 25.5mm whoop mounting spacing. This is the AIO board included on the ultra-light Happymodel Moblite6/7 whoops and is inspired by Happymodel’s Official Pilot – Angry Don FPV! VIDEO: Happymodel Diamond F4 Features Diamond Mounting Pattern – 22.2×22.2×32.7mm Built…

With the growing popularity of digital transmission, FLYWOO introduces an innovative solution for 1-2S HD Micro Drones. This full-featured HD AIO solution integrates a Type-C interface, equipped with a high-performance F405 BGA MCU, and offers enoug Uart to meet the meet all you need. The GOKU F405 HD V2 AIO features a built-in 9V 2A BEC module, effectively preventing power cuts in the O3 Air unit due to insufficient voltage. Additionally, it comes with a serial ELRS 2.4G receiver, an 8MB bl…

Summary The TAKER G4 45A 8Bit AIO, developed by the GEPRC team, features the advanced G473 flight controller for enhanced computing capability. Its robust overcurrent protection and compact design, powered by the QF32MT chip and integrated ESU and MCU, ensure superior performance. We are confident that TAKER G4 45A 8Bit AIO will deliver exceptional enjoyment. Feature Weighs only 9 grams. The G473 control possesses 170MHZ operating frequency and outsatnding computing capability. T…

Summary TAKER F411-12A-E 1~2S AIO is a lightweight and highly integrated flight control system, weighing only 4.2g. It is suitable for 1.2-2-inch Whoop models or 3-inch toothpick models. The 12A ESC overcurrent capability has sufficient redundancy on a small model, and the integrated ELRS2.4G 3.0 receiver makes the installation more space-saving and complete. The F411 main control is equipped with a BMI270 gyroscope, making the flight feel silky and stable. Feature Highly integrated a…

Summary： I am glad to introduce a new member of GEPRC FC AIO,GEP-F722-45A AIO, it is released now. GEP-F722-45A AIO adopts MCU STM32F722,which has powerful performance and higher computing speed.It has 5 full UART ports and can connect more external devices. We designed a 6-pin connector for DJI AIR UNIT MODULE,plug and play. The BLheili_S 45A ESC can handle 45A continuous current(55A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.It can su…

Summary： I am gald to introduce a new member of GEPRC FC AIO,GEP-F7-35A,it is released now. GEP-F7-35A adopts MCU STM32F722,which has powerful performance and higher computing speed.It has 5 full UART ports and can connect more external devices. We designed a 6-pin connector for DJI AIR UNIT MODULE,just plug and play. The BLheili_S 35A ESC can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.Support OSD param…

GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst), totally supports the 2-6S lipo battery.It can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. Support OSD parameter adjustment. It’s 8.8g ultra light weight, and 25.5mm * 25.5mm mounting holes, suitable for most of the frames on the market. Changelog: June 14th,2022: Gyro updated to BMI270. June 25th,2022:Mounting Hole Size changed from 26.5×26.5mm to 25.5×25.5mm.…

TAKER G4 35A is a newly developed AIO flight control by the GEPRC team. It adopts G473 main control and has more redundant computing power. In response to market demand, the TYPE-C interface has been upgraded, and the power supply pad and motor wire pad have been optimized to make welding easier. It is compatible with two mounting holes of 25.5-26.5mm and can be compatible with more frames. We are committed to pursuing flight controllers that are smaller in size, lighter in weight and strong…

Model FOXEER Reaper AIO V3 CPU STM32F745 Power Supply 2~6S Lipo(8.4~25.2V) BEC Output DC5V/2.5A OSD BF OSD Black Box 16M Flash Memory UART 5 Set USB Micro USB Fireware BF:FOXE-FOXEERF745V3_AIO; Inav: FOXEERF745AIO V3 DJI/Vista Connector Supported, 7pin Size 32.5X32.5mm Mounting Hole 25.5X25.5mm,Φ3mm/M2 Weight(g) 8.9g Working Temperature -20℃ ~ +55℃ Working Humidity 20～95% Stora…

Since its launch, the GOKU GN745 AIO has stood as Flywoo’s top-tier AIO product, earning widespread acclaim from Betaflight, INAV, and Ardupilot enthusiasts. Now, we’re excited to introduce the latest upgrade in this series—the V3 version! The V3 boasts a new ESC two-in-one drive solution, enhancing the continuous current capacity to 45A and improving the overcurrent protection capability of the motor pads, resulting in a more powerful overall performance. Furthermore, the V3 version significant…

Product Specifications: Dreamfly RC-G473 AIO 3-6S Ø MCU: STM32G473 Ø IMU: ICM-42688 Ø DJI 03 Air Unit Supported Ø BlackBox: 16Mb onboard Flash Ø Type-C USB interface Ø OSD: 7456E Ø Baro：SPL06 Ø BEC Output: 5V BEC Ø Firmware: BETAFLIGHT Ø Mounting hole sizes: 25.5-26.5mm Ø Continuous current: 35A Ø Peak current: 40A Ø Power input: 3-6S LiPo (11.4v-22.2V) Ø Signal support: Dshot300/Dshot600 Ø ESC firmware: Blue-jay B_X_40 48Khz