This Lite TX module is designed by Happymodel and based on the open-source ExpressLRS which is a very popular low latency and high re-flashed rate RF module for RC Airplane and FPV Racing. This module works with the Jumper T-Lite. Its main hardware architecture is ESP32, ESP8285, and the SX1280 RF chip. The ES24TX-Lite module is a complete solution that is plug-and-play and already pre-loaded with Expresslrs firmware. Now equipped with a power module to ensure stability in high-powered conditi…

Introduce the World first true diversity 2.4 GHz ExpressLRS Rx with RF amps Item: Happymodel EP1 Dual receiver true diversity 2.4Ghz ExpressLRS RX ESP32 PICO D4, dual SX1280(SX1281) Antenna connector: IPEX MHF 1/U.FL RF Frequency: 2.4GHz (2400~2480MHz) Telemetry power: >19dbm Receiver protocol: CRSF Input voltage: 3.5v~8.4v Recommend +5V DC @ “+” pad PCB size: 19mm x 14mm Weight: 1gram exclude antenna Firmware: ExpressLRS v3.0.0 rc1 or latest version Target: Unified_ESP32_2400_RX, …

Frequency: 915 MHz Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: SMA Weight: 6.7 g Cable Length: 85 mm Width: 138 mm(915MHz) Compatibility: ES900TX and ES915TX and ES868TX

Frequency: 915 MHz Polarization: Horizontal polarization Impedance: 50 Ω S.W.R.: <= 1.7 Antenna Gain: 2.0DBi Working Temp: -40~80℃ Humidity: 95%~100% RH RF Cable : RG1.13 Connector: IPEX1 Weight: 2.9 g Cable Length: 85 mm Width: 138 mm(915MHz) Compatibility: ES900RX ,TBS CROSSFIRE NANO RX

EP2 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module SMD Ceramic antenna Frequency Range: 2400 MHz to 2500 MHz Receive refresh rate: 25HZ~500Hz Working voltage: 5v Weight: 0.44 gram Dimension: 10mm*10mm*6mm Peak gain: 3.7dB Default Firmware out of factory: HappyModel_EP_2400_RX V3.0.1 version Built-in a TCXO (temperature compensated crystal oscillator)

EP1 TCXO Receiver Type: ISM2.4GHz ESP8285 MCU SX1280(SX1281)IMLTRT RF Module Omni directional antenna Frequency Range: 2400 MHz to 2500 MHz Receive refresh rate: 25HZ~500Hz Working voltage: 5v Weight: 0.41 gram(without antenna) Dimension: 10mm*10mm*6mm Peak gain: 2.23dB Default Firmware out of factory: HappyModel_EP_2400_RX V3.0.1 version Built-in a TCXO (temperature compensated crystal oscillator)

Summary GEPRC ELRS NanoSE receiver is a new generation remote control system developed based on the ExpressLRS open source project. ExpressLRS sets new standartds for long-range connection, low latency and Maximum refresh rate of 500Hz. GEPRC ELRS NanoSE receiver operates at a frequency of 2.4 GHz. Compared with Nano receiver, NanoSE receiver uses an Integrated SMD ceramic antenna, which further reduces its size while ensuring signal reception, making it more suitable for use on drones w…

Summary GEPRC ELRS Nano 915M V2 Receiver is a new generation receiver system based on ExpressLRS open source project.ExpressLRS features long range operation, low latency, and low price. The ELRS Nano 915M V2 Receiver uses a TCXO temperature compensated crystal oscillator to avoid frequency shifts caused by temperature changes;the telemetry power is up to 50mW; Built-in WIFI antenna, firmware upgrade operation through WIFI. Feature 17x11mm Small size 0.7g weight WIFI Upgrade firm…

Summary The GEPRC ELRS Nano 915M PA500 receiver is an advanced reception system based on the ExpressLRS open-source project. ExpressLRS offers long-range operation, low latency, high refresh rates, and affordability. The ELRS Nano 915M PA500 receiver features a TCXO (temperature-compensated crystal oscillator) to prevent frequency shifts caused by temperature changes. It adopts an integrated high-power PA chip, boasting a telemetry power of up to 500mW. It features a built-in WIFI antenna, f…

Summary The GEPRC ELRS Nano 915M/2.4G Dual-Band Receiver is a new Dual-Band system developed from the ExpressLRS open-source project. It is designed based on Semtech’s third-generation LR1121 RF chip, supporting 150 – 960MHz (sub-GHz) and 2.4GHz bands for Dual-Band transmission. The ELRS Nano 915M/2.4G Dual-Band Receiver features dual LR1121 chips, allowing easy switching between 915M , 2.4G when paired with 915M/2.4G antennas. It is fully compatible with existing 915M and 2.4G ELRS TX modul…

Summary GEPRC ELRS Nano 2.4G PA100 Receiver is a new generation of 2.4G receiver system based on ExpressLRS open source project.ExpressLRS features long range operation, low latency, maximum 1000Hz refresh rate, and low price. The ELRS Nano 2.4G PA100 Receiver uses a TCXO temperature compensated crystal oscillator to avoid frequency shifts caused by temperature changes;Integrated PA+LNA,the telemetry power is up to 100mW; Built-in WIFI antenna, firmware upgrade operation through WIFI. Feat…

About this item ELRS Dual 915M PA500 Diversity Receiver High-Power 500mW WIFI TCXO for RC FPV Quadcopter Longrange Freestyle Drone Parts ELRS 915M PA500 Diversity Receiver for RC FPV Quadcopter Drone Parts Optimized performance: Equipped with a high-power PA chip, it ensures strong signal strength and reliability for your FPV quadcopter project. Enhanced power output: With 500mW power output, this receiver improves the range and responsiveness of your drone, making it ideal for long-ra…

Summary The GEPRC ELRS 915M/2.4G Gemini Xrossband Receiver is a new dual-band system developed from the ExpressLRS open-source project. It is designed based on Semtech’s third-generation LR1121 RF chip, supporting 150 – 960MHz (sub-GHz) and 2.4GHz bands for simultaneous dual-band transmission. The ELRS 915M/2.4G Gemini Xrossband Receiver features dual LR1121 chips, allowing easy switching between 915M Gemini, 2.4G Gemini, and dual-band 915M+2.4G modes (requires dual-band TX module support) w…

Summary The T antenna is designed and manufactured by GEPRC team.Each antenna is repeatedly tested to ensure correct use. Specifications 915MHz Mini T Antenna Antenna length：60.5mm Coaxial cable length：35mm Weight：1.7g Connector：ipex1 Gain：2dBi Frequency：868-915MHz Package Included 1 x Mini T Antenna

Summary The GEPRC 915M/2.4G Dual-band T Antenna is crafted for ELRS dual-band receivers, delivering superior reception on both 915MHz and 2.4GHz. Switch between frequency bands effortlessly without needing to change the antenna on ELRS dual-band receiver. Specifications Model: GEPRC 915M/2.4G Dual-Band T Antenna Frequency: 915M+2.4G Dual-Band Coaxial Cable Length: 80mm Weight: 5.3g Connector: ipex1 Gain: 2dBi SWR: <2.0

rSky XM+ Receivers are now coming installed with ACCST 2.0 firmware. This is not compatible with ACCST 1.0 controllers and firmware updates will be required if there is a firmware mismatch. Firmware can be found here: https://www.frsky-rc.com/xm-plus-mini-sbus-non-telemetry-full-range/ (Select history firmware download for ACCST 1.0 firmware) FrSky XM+ Ultra Mini SBUS Receiver , ONLY 1.6g Specification Dimension : 21.5x12x3.5mm(LxWxH) Weight : 1.6g Number of Channels : Up to 16CH f…

The X8R is in a smaller package than the previous 8 channel receivers but has so much more capability. The new Smart Port supports the new hub-less sensors as well as the older hub analog sensors. The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second. Th…

The X7S ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers. The battery compartment now uses 2 18650 Li-Ion batteries and can be balance charged via the Mini USB interface. The X7S ACCESS version features Hall-sensor gimbals and the PARA wi…

1 replacement IPEX antenna. Fits the latest FrSky R-XSR, X4RSB and S6R receivers. Note: FrSKY has changed the antenna plug on the latest X4RSB and S6R Receivers and this is the replacement antenna. Specifications Length: 10/15cm (Choose the length) Connector Height: 1mm Connector Width: 2.1mm

Description: The multirotor may crash, sometimes it will break the antenna of the receiver, the antenna outer covering will be damaged or directly broken, which will affect the radio link. Continue to use the broken antenna will have the risk of losing your quad. Use our replace antenna, just need to unplug your old antenna and plug in the new ones, no need soldering. 150mm standard length. Precision machining, low loss signal stability. High sensitivity, high quality, RG-113 silver plat…

Frsky R-XSR receivers are now coming installed with ACCESS firmware. To bind with ACCST only radios, a firmware update is required. Firmware can be found here: https://www.frsky-rc.com/r-xsr/ (Select history firmware download for ACCST 1.0 firmware) The FrSky ultra mini receiver R-XSR is the evolution of the popular full range XSR receiver. The R-XSR is a standalone receiver with all the functionality of the full size XSR (including telemetry), but at 1/3 size and weight of XSR receiver.…

Flysky X8B 2.4G 8CH PPM i-BUS Mini Receiver for AFHDS 2A FS-NV14 RC Drone Radio Specification: Brand name: Flysky Item name: X8B Receiver Channels: 8 Model Type: Multi Rotor Data Output: PPM/i-Bus Frequency Range: 2.408-2.475GHz Brandwidth: 500KHz Number of Bands: 135 Transmission Power: <20dBm Receiver Sensitivity: -92dBm 2.4GHz Protocol: AFHDS 2A Modulation: GFSK Low voltge alarm: None Chargeable: None Antenna length: 93mm Input Power: 4.0-8.4V Online Update: None No ground…

The FS-RX2A is an AFHDS 2A compatible receiver in a minuscule form factor. Weighing only 1g, this receiver is perfect for micro builds. The FS-RX2A Pro Radio Receiver Mini Receiver is built for use in multi-rotor drones and is a 1-way receiver (no telemetry). It uses the extremely stable AFHDS 2A (Automatic Frequency Hopping Digital System) protocol, supports standard PPM output and has i-BUS support for up to 10 channels. In the world of racing drones, the requirements are for small and l…

Specs: • Channels: PPM 8CH / IBUS 10CH • Frequency Range: 2.408‐2.475GHZ • 2.4GHz System: AFHDS 2A • Work Mode: IBUS or PPM • IBUS Connector: 1.0 SH 3pin plug • PPM Connector: Solder pad • Failsafe Function: Support (Only IBUS Mode) • Transfer Method: FHSS • Antenna Length: 30mm • Transmission: 300m • Working Current: 40mAh • Size: 20x13x4.5mm • Weight: 1.2g • Compatible Transmitter: FS‐i4, FS‐i6, FS‐i6S, FS‐i6X, FS‐i10, FS‐GT2E, FS‐GT2G, FS‐GT2F, Turnigy Evolution