Introduction M10G-5883 GNSS module integrates the u-blox 10th generation receiver chip – M10050, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 18 x 18 x 4mm patch antenna provides the best balance between performance and small size. Built-in flash , parameters can still be saved when module lost power. Specifications GNSS Receiver: U-BLOX M10 (M1…

Description The LR900-F is a new long-range telemetry radio developed by MicoAir Technology based on LoRa spread spectrum technology. It operates in the 890-915MHz frequency band with a maximum transmission power of 500mW and supports FHSS self-interference hopping mode. With the outdoor RF line-of-sight range of 30km or more, it can provide a reliable point-to-point bidirectional communication link for drones, ships, robots, and RTK devices. It has two ports: one is a TTL serial port, which…

Overview The LR24-F Telemetry Radio is a small, cheap radio with superior performance for flight controller that typically allows ranges of better than 10 kilometers. And it is very suitable for Pixhawk or other Audupilot/PX4 flight controller. It will connect automatically when power up without any configuration unless you need to implement some special features. The LR24-F works in the 2.4GHz, so is better to use 915M receiver (BlackSheep/ELRS 915) than any other 2.4G receiver on your dron…

MicoAir743 flight controller is officially supported by Ardupilot starting from version 4.6, you can update the firmware through Mission Planner or download all the firmware files(Copter/Heli/Plane/Rover/etc) here: ArduPilot Firmware Download Also you can use the online firmware builder provided by Ardupilot to customize your firmware for MicoAir743: ArduPilot Custom Firmware Builder Old version(v4.5.1) firmware can be download here: MicoAir743/Firmware/Ardupilot(v4.5.1) PX4 Mic…

SPECIFICAIONS: Flight Controller MCU: STM32H743VIH6, 480MHz, 2MB Flash IMU: BMI088+BMI270 Baro: SPL06 TF Card Slot 7x UART 9x PWM 1x I2C 1x SWD 2x ADC (VBAT, Current) 1x LED Strip 1x Beeper USB Type-C BEC 5V 2A output (for controller, receiver, GPS, optical flow or other devices) BEC 12V 2A output (for DJI O3/O4/O4 pro) ESC Firmware : AM32_F4A_4IN1_F421_2.17 PWM Freq : 48KHz ESC Protocol : PWM/DShot300/DShot600 (support BDShot) Continuous Current …

Unlock the full potential of your drone with the MicoAir H743 AIO 35A AM32 3-6S Flight Controller & ESC – 25×25mm. With an optimized size and powerful capabilities, this combination is designed for superior control and maximum performance. Get the most out of every flight with MicoAir. You can flash Betaflight , INAV, Ardupilot or PX4 firmware if needed. More information here: MicoAir743-AIO-35A – Flight Controller – MicoAir Tech Flight Controller MCU: STM32H743VIH6, 480M…

The MicoAir F405v2 Flight Controller supports two popular open-source flight control firmwares – INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates are easily done through Mission Planner or INAV Configurator. Pioneering Integration of the BMI088 IMU: The MicoAir F405v2 is the first flight controller to incorporate the BMI088 IMU and be compatible with INAV firmware. This IMU is renowned for its excellent stability, high …

Description The MicoAir405 v2 is a new cost-effective flight controller runs Ardupilot&INAV firmware, This is the first one which combine the STM32F405 with the high performance IMU sensor BMI088, allowing the flight controllers to have top performance and an attractive price at the same time. The BMI088 is a high-performance 6-axis IMU sensor that comes from Bosch®, its excellent temperature stability and vibration robustness far exceed similar products on the market, making it particularly…

Firmware : AM32_F4A_4IN1_F421_2.17 PWM Freq : 48KHz ESC Protocol : PWM/DShot300/600 Power Input : 2-6S LiPo Continuous Current : 55A * 4 MOSFET RDS(on): 0.75mR Current Sensor Output : 12.75mV/A Mounting : 20*20mm(Φ3mm) / 30.5*30.5mm(Φ4mm) Dimension : 44 * 43.5 * 5.2 mm Weight : 14g

Specifications MCU: STM32H743VIH6, 480MHz, 2MB Flash IMU: BMI088+BMI270 Baro: SPL06 Compass: QMC5883L OSD: AT7456E MicroSD Card Slot 8x UART 11x PWM 1x I2C 1x SWD 2x ADC (VBAT, Current) USB Type-C DJI O3/O4 VTX connector BEC 5V 3A output (for controller, receiver, GPS, optical flow or other devices) BEC 12V 3A output (for video transmitter, camera) Bluetooth Telemetry (connected to UART8 internally, baudrate 115200) VBAT Input Range: 2-6S (6-27V) UART Ma…

Description High Adaptability Voltage Input Support : Suitable for a wide range of voltage inputs from 4-6s, compatible with drones of different sizes and power specifications. From 3-inch mini drones to 7-inch or even larger drones, all can be perfectly matched. BlueJay Firmware Implementation : Equipped with the latest version of BlueJay firmware, utilizing up to 48K of default PWM frequency to effectively reduce electrical noise interference with the IMU, significantly improving flight …

Bluejay-4IN1-60A Firmware : Bluejay_0.19.2_JH40 PWM Freq : 48KHz ESC Protocol : DShot300/600 Power Input : 3-6S LiPo Continuous Current : 60A * 4 MOSFET RDS(on): 0.75mR Current Sensor Output : 12.75mV/A Mounting : 30.5*30.5mm (Φ4mm) Dimension : 44 * 43.5 * 5.2 mm Weight : 13.5g 3D Model Bluejay-4IN1-33A Firmware : Bluejay_0.19.2_JH40 PWM Freq : 48KHz ESC Protocol : DShot300/600 Power Input : 2-6S LiPo Continuous Current : 33A * 4 MOSFE…

LRS-350 series is a 350W single-output enclosed type power supply with a 30 mm low-profile design. Adopting the input of 115VAC or 230VAC(selectable by switch), the entire series provides an output voltage line of 3.3V, 4.2V, 5V, 12V, 15V, 24V, 36V and 48V. Applications: Industrial automation machinery Industrial control system Mechanical and electrical equipment Electronic instruments, equipment, or apparatus Features: Mean Well LRS-350-24 SMPS Output: 24V, 14.6A, 350.4W…

Mayatech MT10PRO Motor 10KG Tension Thrust Tester Propeller Power Measurement With Current LCD Display For RC Model Racing Drone Features Support current display function,can display voltage, current rate, discharging power and discharging time. LCD display, visible thrust measurement data Measuring range 0-10kg wide, accurate to 1g Supports conversion between grams and ounces Compatible with a variety of batteries, tester power supply is 5 -26v, support xt-60 connector Compatib…

Key attributes Gender: Unisex Age Range: 14 Years & up Use: Vehicles & Remote Control Toys Type: screwdriver Material: Metal Place of Origin: Hubei, China Brand Name: Mayatech Quantity: 1 pcs For Vehicle Type: Airplanes RC Parts & Accs: Bolt driver

Key attributes private mold: NO place of origin: Hubei, China brand name: Mayatech model number: Soldering Station Product Name: Five Arm Soldering Station With Swiveling Alligator Clip Material: Metal Application: Fixed-wing Aircraft Model Drone, etc Size: 150*80*15mm Weight: 567g

Key attributes private mold: NO type: accessories place of origin: Hubei, China brand name: Mayatech model number: 25T Gold Product name: Mayatech FUTABA 25T Gold Standard servo CNC metal model steering arm Brand: Mayatech Color: Gold Keyword: metal model steering arm Description: Mayatech FUTABA 25T Gold Standard servo CNC metal model steering arm Weight: 4g Size: 35*5.9mm…

1 X Mayatech Drop release mechanism (without servo)

Key attributes private mold: NO type: drone accessories place of origin: Hubei, China brand name: MAYATECH Product name: Aluminum alloy tool tray Brand: MAYATECH Material: Metal DIY: NO Product category: drone accessories Weight: 230g Processing customization: NO

Key attributes Gender : Unisex Age Range : 14 Years & up Use : Vehicles & Remote Control Toys Type : Tool Material : Metal Place of Origin : Hubei, China Brand Name : Mayatech Model Number : 4.0 5.5 7.0 8.0 Tool Supplies: Tools RC Parts & Accs; Glow Plugs For Vehicle Type : Airplanes Remote Control Peripherals/Devices : Servos Material : Metal Use: Vehic…

Key attributes type: Drone remote control place of origin: Hubei, China brand name: Mayatech model number: motor pliers material: alloy Specification: motor pliers Can DIY: no color: black Is it multifunctional: yes Suitable age: Youth (15-35 years old)

Key attributes private mold: NO type: drone accessories place of origin: Hubei, China brand name: MAYATECH Product name: UAV Fixed Wing Exhibition Support Removable Brand: MAYATECH Material: Composite Material DIY: NO Product category: drone accessories

Key attributes type: Drone remote control place of origin : Hubei, China brand name: Mayatech model number: H1.5/H2.0/H2.5/H3.0 Whether to import: no suit type: Allen screwdriver set Is it magnetic: no Included pieces: 4 Color; silver Size: H1.5/H2.0/H2.5/H3.0

Product description : Input 4-14S LiPo / max. 60V. Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p. Blue power “ON’ LED. 59mm x 29mm x 13mm / 26g with enclosure(without cables) Delivery in PP box: 55 x 55 x 20mm Scope of delivery: 1x 021: PL 4-14S HYB-BEC / 1x 5.3V / 3A 1x 040: PL – Series sensor cable / L=15…