Battery pack designed and made by techhobby with Molicel 2800mAh P28A Cells

Please note: These are original BIS-certified Molicel cells from authorized distributors. Please do not compare prices with B-grade cells found at lower prices on other websites. You can contact us after placing an order for the COC certificates. All cells will be OQC tested before shipping, along with IR and voltage checks, for extra precautions. Cells also carry a 3-month warranty based on the Serial Numbers dispatched. Description Specifications: Manufacturer Molic…

Designed and developed by techhobby.in with Molicel cells

PRODUCT DESCRIPTION MMCX to SMA male Adapter Cable Both the MMCX to SMA Female Adapter Cable are standard. Total Length:100mm Package included: 1pcs x MMCX to SMA Female Adapter Cable

A simple Miniware XT60 to DC Barrel Jack cable to use for your TS100 Soldering Iron or on field devices. Perfect for Lipos and Liion Packs Includes 1x XT60 to DC Cable

Temperature Range: 100℃ – 400℃ (Max) Power Input: 9V/2A (QC 3.0) Data/Power Interface: USB Type-C Temperature stability: ±3% Display: OLED Length: controller: 96mm; tip: 60+40mm Weight: 36.5g (power adaptor not included) Certifications: CE, FCC

Product description Features: OLED screen, full body CNC aluminum alloy casing USB Type-C PD2.0/QC3.0 standard input Power increased from 18W to 36W max Only 8s to heat from room temperature to 300℃ Brand new easy-push tip fastener, one push to loosen tips Builtin smart chip for Port Protection Share same tips with TS80 Specifications: Temperature Range: 100℃ – 400℃ (Max) Input: 9V/2A (QC 3.0) / 12V 3A（PD2.0） Power: 36W Max Fastest heating time (from room temperat…

TS80P is the upgrade version of TS80 Smart Soldering Iron. TS80P is a smart soldering iron powered by USB Type-C PD2.0/QC3.0 standard input, which can be powered by charging plugs, power banks and mobile power supplies that comply with PD2.0 (12V 2.5A)/QC3.0 (9V 2A) standard. Its output power has been increased from 18W to 30W max, with an 8-second heating time at fastest from room temperature to 300℃, meeting a wider range of soldering. TS80P controller is made of aluminum alloy through CNC i…

The TS1C rechargeable soldering iron is equipped with a wireless design and powered by a 750F capacitor. The soldering iron can be fully charged wirelessly at the control station in a short time of only 7 minutes. Wired charging is also possible via the USB-C port on the soldering iron and using the same power input parameters as for the control station. With a full charge, 180 soldering joints of the 0805 type can be soldered before having to recharge again. The TS1C can deliver up to 36W of po…

The TS100 Digital OLED Programmable Soldering Iron is an internal heating intelligent CNC soldering iron. It is easy to assemble and disassemble for storage. It has a comfortable handle and the highly effective heating function makes it an indispensable tool for any hobbyist. It is made from high-quality metal & plastic materials and assembled with great workmanship, for high durability and reliability. Our favorite feature of the TS100 is its ability to be so mobile. It can easily be powered …

Product description Model: TS80-K4, TS80-D25,TS80-B02,TS80-J02,TS80-BC02 Welding head shape: Horse’s hoof Welding head mouse shape: Horse’s hoof Applicable range: TS80 TS80P welding head Temperature adjustment range: 200-400℃ Maximum wattage: 60W Welding head length: approx. 115mm Package Contents: 1 * TS80 Soldering Iron Tips

MHP50-A5 Mini Hot Plate Preheater

This is DT71 Portable Digital Smart Tweezers with Measuring Arms. The measuring arm has magnetic elasticity, which is ergonomic, built‑in high‑power double lithium batteries, and long standby time. The shape of the tweezers with a 3‑section split structure can be divided into the controller, the measuring arm, and the tweezers head. Using 360‑degree adjustable windows, to meet different viewing angles. Intelligent attitude judgment, automatically distinguish left and right-hand…

Features : 1.This is a mini digital scale. 2.Portable and lightweight,easy to carry. 3.Auto power-off,clearing/taring function. 4.High accuracy,fast response. 5.LCD backlight display,easy to read. Description : 1.Multiple weighing modes:g/tl/oz/ct/gn. 2.Auto calibration,counting function. 3.Widely used in kitchen,pharmacy,home,DIY,jewellery,gold etc. Specification : Color:silver Range:200g Accuracy:0.01g Units:g/tl/oz/ct/gn Tare range:tare full capacity Auto O…

Product Features Hardware design based on PX4-V6 standar. Full adaptation of PX4 firmware (also providing a modified branch of 500HZ IMU rostopic). future maintenance and hardware updates. Hardware features：27mm x 29mm x 9mm Specifications MCU: STM32H743VIH6, 480MHz, 2MB Flash IMU: BMI088+BMI088(DUAL) Baro: SPL06 MicroSD Card Slot 7x UART 8x PWM 1x I2C 1x SPI 1x SWD 2x ADC (VBAT, Current) USB Type-C BEC 5V 2.5A output (for controller, receiver, GPS, optica…

Specifications Output Interface : UART/115200/LVTTL Protocol : Micolink/Mavlink/MSP Output Rate : 50Hz Firmware Supported : Ardupilot/PX4/INAV/FMT TOF Range : 6m@90% reflectance/1K Lux; 4m@90% reflectance/70K Lux; Center Wavelength : 940nm Emitting Angle : 2 ° Dead Zone : 2cm Ranging Accuracy : 2cm(<2m@90% reflectance); 1.5%(>2m@90% reflectance) Optical Flow FOV : 42 ° Max Speed Measurement : 7m/s@1m height Ambient Light Demand of Optical Flow : >60Lux Optical…

MicoAir MTF-01P Optical Flow & 12m Range 2IN1 Sensor You’ll achieve greater accuracy in navigation with our MTF-01P Optical flow & 12m Range 2IN1 Sensor, thanks to its advanced technology and 12 meter range. Make smarter decisions and stay in control with our optical sensor solution. SPECIFICATIONS: Output Mode: UART 115200 Output Interface: LVTTL (3.3V) Protocol: Micolink/Mavlink/MSP Output Rate: 100Hz Firmware Supported: Ardupilot/PX4/INAV/FMT(Default firmware flashed is iNav) …

Description MTF-01 is an optical flow ranging integrated sensor developed by MicoAir Technology. It uses uart to output data and is compatible with mainstream open source flight controllers such as Ardupilot, PX4 and INAV. It can be used directly after simple configuration without complicated development process. MTF-01 features an integrated PMW3901 optical flow sensor and a high-performance TOF sensor, which can be used normally in outdoor sunlight environments. Specifications Output…

Description Product ModelMT-15 Product Weight:5.5g Product Size28 * 13.5 * 21mm Output ModeUART/IIC Switchable Measurement Frequency800Hz-5Hz Adjustable Ranging Range0.05-15m Ranging Blind Spot5cm Ranging Accuracy2cm (0.05-2m) 1% (2m-15m) @ 90% Reflectance Object Laser Wavelength830-870nm Resistance To Ambient Light100K Lux Illumination Laser FOV1-2° Laser Safety LevelClass 1 Consumption500mw Working Voltage4.0-5.5V Working Temperature -10°C~60°C

6m ToF Range Sensor, Super mini, outdoor available supports Ardupilot/PX4/INAV

Specifications Output Mode : UART 115200; I2C 400K Output Interface : LVTTL (3.3V) Protocol : Micolink/Mavlink/MSP Output Rate : 800-5Hz (50Hz default) Firmware Supported : Ardupilot/PX4/INAV/FMT TOF Range : 10m@90% reflectance/600Lux; 8m@90% reflectance/70KLux; Center Wavelength : 808nm Emitting Angle : 1.5 ° Dead Zone : 2cm Ranging Accuracy : 4cm(0.02-2m@90% reflectance);2%(>2m@90% reflectance) Light source : LiDAR Power Consumption : 500mW Supply voltage : …

Introduction MG-A01(M10 Ultra) GNSS module integrates a special version of u-blox 10th generation receiver chip – M10050, which run with higher frequency than normal, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 25 x 25 x 4mm patch antenna provides the best performance. Built-in flash , parameters can still be saved when module lost power. Why M10 Ul…

Introduction MG-903 GNSS module integrates a u-blox 9th generation receiver chip – M9140 and the magnetic sensor – IST8310. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 20 x 20 x 4mm patch antenna provides the best performance. u-blox M9 receivers support concurrent reception of four GNSS.The high number of visible satellites allows the receiver to select the best signals. This maximizes th…

Introduction MG-902 GNSS module integrates a u-blox 9th generation receiver chip – M9140 and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation. The high-gain 25 x 25 x 4mm patch antenna provides the best performance. u-blox M9 receivers support concurrent reception of four GNSS.The high number of visible satellites allows the receiver to select the best signals. This maximizes t…