About this product Introducing the CUAV SKYE DroneCAN Airspeed Sensor, a groundbreaking innovation in UAV technology. This all-in-one sensor integrates a pitot tube, airspeed sensor, and temperature, and humidity sensor, along with an ARM M4 processor and dual temperature control system, delivering unparalleled performance in a compact package. Boasting a high-power 32W heating system, the SKYE automatically adjusts the heating to prevent data errors caused by freezing or rain obst…

NEO 3X is a GNSS receiver with IP66 protection level. It supports four-star system integration and has a variety of built-in waterproof and dustproof structural designs and materials to meet dustproof and waterproof requirements in various environments. It has built-in STM32F4 series processor, ICP2100 barometer, Ublox M9N module and RM3100 industrial grade compass, and supports DroneCan protocol. NEO 3X GPS Features: 1–Ublox M9N satellite receiver, accuracy up to 0.7m 2–Suppor…

About this product The CUAV NEO 3 Pro continues the hardware design of NEO V2, upgrades the GNSS module to Ublox NEO M9N, and supports Beidou, Galileo, GLONASS, and GPS at the same time. The horizontal positioning accuracy is up to 0.7M. The NEO 3 is Integrated with a safety switch, buzzer, and RGB light. VIDEO: Why the Neo 3 Pro is the Way a Standalone Should Be! Features Industrial-Grade Electronic Compass RGB Surround Light Buzze…

CUAV NEO 3 GNSS UAV Navigation Modules | GNSS U-blox M9N Drone Hardware CUAV NEO 3 GPS uses a hardware design similar to NEO V2. It upgrades the GNSS navigation module to the M9N module that supports the four mainstream satellite systems of Beidou, GPS, Galileo and Glonass. The positioning accuracy has been significantly improved. It is a highly cost-effective unmanned system positioning and navigation module. It integrates a compass, barometer, flight controller status light, buzzer, and sa…

About this product The CUAV CAN PMU is a drone power management unit with a built-in STM32F4 processor and running the CUAV ITT algorithm. It can accurately measure the drone voltage and current in real time. The PMU supports a maximum of 6-62V voltage and 110A current and can output 5.4V 5A (maximum instantaneous 8A / 120s, constant 5A). This unit powers the flight controller, uses CAN bus communication, supports standard UAV CAN protocol, and each PMU unit is factory calibrated t…

The BZGNSS BZ-181 is a reliable GPS module, designed to deliver accurate location data in a variety of environments. This module features a powerful antenna for enhanced accuracy and a wide range of integrations, making it an ideal choice for navigation and mapping applications. Check out our all our GPS and Lost Model Devices. Package Includes: 1x BZGNSS BZ-181 GPS Module

The BZGNSS BZ-121 Dual Protocol GPS Positioning Module is designed to bring unmatched reliability and precision to FPV and drone operations, especially where out-of-control rescue is a priority. Compatible with both fixed-wing and crossing drones, this versatile GPS module supports dual protocols, ensuring compatibility with a range of flight controllers for seamless integration. The BZ-121’s high-accuracy positioning capabilities make it ideal for recovery missions, reducing the risk of losin…

Specifications CPU: STM32F405RET6 Input Power: 3S-6S Dimensions: 38.5*38.5mm（30.5×30.5mm hole diameter 4mm） IMU: ICM-42688 OSD: AT7456E Barometer: SPL06-001 Black box: Support（capacity：16M） BEC: 5V/2A、10V/2A DJI: Supports direct insertion and welding IIC: Support Telemetry: UART1，UART2，UART3，UART4，UART5， UART6，UART5 is ESC Telemetrv telemetry USB Port: TYPE-C Galvanometer port: Pad CUR ESC outputs: M1-M8 LED: Support external LED Target firmware: betaflight_4.5.0 BROTHERHOBBYF4…

BOTWIRE Produce Name: BOTWINGF Dimension: 40mm x 9mm Weight: 1.47g About Racewire The BOTWIRE Race-wire is a specialized motor wire. It is a convenient bridge between the motor and the ESC (Electronic Speed Controller), which helps extend the existing length of wire on the motor, keeps the propellers from cutting motor wires and also makes it easier to swap motors on the field. Wiring and connection 1. Mount the motor on the drone arm and place the Bot-wire on the arm of the drone…

BOTWING Flight Controller: F722 Dimensions: 40x40mm Firmware: BetaFlight, iNav Firmware Target Name: BOTWINGF722 Mounting: 30.5mm x 30.5mm (4mm hole size) MicroController(MCU): STM32F722 Motors Outputs: 4 Motors and 2 Servos Gyro (IMU): ICM42688P Power Input: 3-6S LIPО On Screen Display (OSD): AT7456E BlackBox: 32 MB Winbond Blackbox Buzzer: BZ+ and BZ- pad used for 5V Buzzer i2C: Supported SDA & SCL pads on front side. Used for magnetometer, sonar etc. ESC Telemetr…

About Botwing F405 Meet BotWing F405, the versatile flight controller that powers everything – from FPV racing and cinematic drone shoots to DIY learning projects. Built around the reliable STM32F405 MCU and the precision ICM42688P gyro, BotWing F405 offers smooth, stable flight performance across a wide range of setups. With support for Mission Planner, iNav, and BetaFlight, and a wide power input range (3–6S LiPo), it’s designed to adapt seamlessly to your needs – whether you’re chasing racin…

The BotStack F722 FC + 50A ESC Combo is designed for pilots who want faster processing, sharper control, and reliable power, all in one streamlined package. At its core, the Botwing F722 Flight Controller is equipped with an STM32F722 processor and ICM42688P gyro, delivering high-precision flight handling and responsiveness. With support for Betaflight and iNav, it gives you the flexibility to choose between freestyle tricks or advanced navigation builds. Pairing it is the BotDrive 50A 8-bit…

Integrates the versatile, feature-packed F405 flight controller and a high-current AM32 ESC that provides a better throttle response, telemetry, and firmware tunability; excellent for pilots who want accuracy and the latest technology in their freestyle or power-hungry builds. F405 Flight Controller: The small and compact faderless FPV flight controller makes your setup much more accessible and easy to perform. Advanced ESC: The AM32 ESC firmware is installed in this ESC to make the per…

The BotStack F405 FC + 50A ESC Combo is built to give your drone both brains and brawn in a single, reliable package. At the heart of this stack is the Botwing F405 Flight Controller, designed with a solderless setup that makes installation clean and effortless. Packed with features like OSD, black box logging, and support for 2–6S LiPo batteries, it ensures smooth, precise control without the hassle of complicated wiring. Backing it up is the BotDrive 50A 8-bit ESC, engineered to handle hi…

Built around the ubiquitous u-blox M10 GPS chip, BotNavigator V1 allows you to use seven different receiving frequencies, such as GPS L1, GLONASS L1, BDS B1, Galileo E1, SBAS L1, and QZSS L1. It gets worldwide coverage and quick and stable satellite acquisition in every environment. Equipped with an LIS3 MDLTR compass for highly accurate heading and a high-sensitivity ceramic antenna, Bot Navigator GPS V1 guarantees a strong signal and reliable service. It is also equipped with UART (u-blox pr…

BOTGLOW Produce Name BOTWIRE Dimension: 40mm x 9mm Weight: 1.47g LED Type: WS2812B LED Count: 5 About Racewire Introducing the BOTGLOW LEDs, a next-generation lighting solution designed for drones and FPV enthusiasts. With 5 large, ultra-bright 5x5mm LEDs arranged in a robust yet lightweight form, these LEDs deliver unparalleled visibility and style for both day and night flights. The unique design features a convenient pin layout, making daisy- chaining simple and efficient, and …

Introducing BotDrive 32-Bit, the ultimate 4-in-1 ESC engineered for the next generation of high-performance drones, quadcopters, and RC vehicles. Designed for those who demand extreme power without compromise, BotDrive packs four 55A continuous (60A burst) ESCs into a lightweight, ultra-compact 30.5×30.5mm mounting footprint delivering elite performance with effortless installation. At its core, BotDrive is powered by the ultra-fast AT32F421G8U7 32-bit MCU and FD6288Q MOSFET DRIVER, unlocking …

Meet BotDrive 8-Bit, the 4-in-1 ESC built for drone pilots who demand peak performance and bulletproof reliability. Designed for high-powered quadcopters, drones, and RC vehicles, BotDrive combines four 50A ESCs into a single compact 30.5×30.5mm board delivering massive output without adding unnecessary weight or complexity. Powered by the robust EFM8BB21F16G MCU and equipped with the advanced FD6288Q MOSFET DRIVER, BotDrive ensures ultra-smooth throttle response and precise motor control even…

The RUSH BLADE F722 Stack for the DJI Digital FPV System by RUSHFPV features the RUSH BLADE F722 Digital Flight Controller and RUSH BLADE 60A 3-6S BLHeli_32 4-in-1 ESC (Extreme Edition), which can handle up to 6S input voltage and push your FPV racer to the max. SPECIFICATIONS: RUSHFPV RUSH BLADE F722 Digital Flight Controller For DJI Digital FPV System MCU： STM32F722RET6 GYRO： ICM42688P BLACKBOX ：16MB FLASH BEC：INPUT 7-36V / 3-6S LIPO，OUTPUT 1 5V 3A，OUTPUT 2 10V 3A PORT： 8×PWM 5…

PDB details 1. Compatible up to Octa copter configuration. 2. FMU PWM OUT. 3. I/O PWM OUT. 4. Can connect 1-8 ESC. 5. It can handle up to 100 Amps. 6. Circle shape with a 35 mm radius. 7. Weight: 17 gm. 8. Material: glass fiber The 100A ESC Power Distribution Board For drones is a lightweight distribution board that will easily power your multi-rotor aircraft and configures up to Octa. These boards are great for smaller multirotor builds. They’re compact and lightweight and offer larg…

*Function – The M80Q GPS with GLONASS, Galileo, QZSS and SBAS receiver technology and built-in micro patch antenna. For your UAV systems, Robots, RC, FPV or other projects. Electronic compass IST8310 integrated. – Industry leading -166 dBm navigation sensitivity – Navigation update rate up to 18 Hz, default 1Hz – Cold starts: 27s – 72 Searching Channels – Data Protocol: NEMA, UBX – Support Rate: 4800bps-921600bps, default 38400bps – Rechargeable 3V lithium backup battery – Powe…

Argus is axisflying electronic series that include ESC, FC and stack. The lightweight Argus Mini argus mini is specially designed for small size FPV drone, reducing the weight of the whole FPV to a greater extent, while providing stable and excellent control. Features: The FC supports up to 4 motor outputs, easily build your drone. Quickly check the working status of the FC by turning on and off the corresponding status indicator light. Open circuit board, free soldering equi…

When every millisecond counts, you can’t afford to compromise. The AxisFlying Argus Mini 55A 4in1 ESC is engineered for pilots who demand nothing less than lightning-fast response and unwavering performance. Powered by the AT32F421G8U7 processor, this ESC doesn’t just keep up—it stays ahead. With a continuous current capacity of 55A and the ability to handle bursts up to 65A, the Argus Mini gives you the power you need, when you need it. Whether you’re ripping through tight corners or making s…

More efficient, faster, here is the Argus Mini 40A 4in1 ESC from the manufacturer Axis Flying. Thanks to its AT32F421G8U7 processor , this ESC will guarantee you fast response and incredible performance in flight. It supports a continuous current of 40A which can peak up to 50A . Its PWM frequency can vary between 24 and 96kHz, all while operating under the BLHeli32 firmware. To install it in your machine, you need 20x20mm mounting holes . Finally, it will accept a LiPo power supply from 4S …