PRODUCT DESCRIPTION Features: – 6 layers double-sided PCB board; – 2OZ copper skin thickness for 1-4 layers,better operating load capacity; – Standard 20*20 Φ4mm mounting holes, rational layout, countersunk holes on extended power soldering pad enable each layer board can be powered; – Supports DShot DShot150/300/600/MultiShot/ OneShot etc. Specification: – Dimension: 31*29.5mm – Mounting Holes: 20*20mm/Φ4mm – Weight: 10.8g – Supports 2-6S lipo input – MCU：G071 – Con…

This iFlight Succex Micro Tower System includes the advanced SucceX Micro F4 V2.1 Flight Controller along with the SucceX Micro 15A V2 4-in-1 ESC, which can push your FPV racer to the max! Specifications SucceX Micro F4 V2.1 Pro Flight Controller STM32F411 Input voltage 2-4S LIPO Gyro: MPU6000 2x UART ports 4x motor outputs Betaflight OSD :AT7456E Blackbox FLASH: 8MB BEC 5V 2.5A cont. Size: 21mm*21mm Mounting holes distance: 16*16mm Weight: 2.5g Firmware : IFF411_…

The SucceX-E Mini F7 Stac by iFlight includes the advanced SucceX-E Mini F7 Flight Controller along with the SucceX-E Mini 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max! This stack is plug and play – meaning that no soldering is needed. You can plug this stack into your Caddx Vista, analog VTX and it comes with a universal receiver plug! FC // SucceX-E Mini F7 Features Gold-plated plug BlackBox: 8MB Vista HD Plug-and-Play. No need to s…

FC // SucceX-E Mini F7 Top Features: – Gold-plated plug – BlackBox: 16MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Changelog: Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented. Before BMP280 changed to DPS310 Before 8MB Flash changed to 16MB Flash August 2021: Barometer is not supported Specifications:…

The SucceX-E Mini F4 Stack by iFlight includes the advanced SucceX Mini F4 Flight Controller along with the SucceX 35A 4-in-1 ESC, which can handle up to 6S input voltage and push your FPV racer to the max. Specifications SucceX-E Mini F4 Flight Controller MCU：168MHz STM32F405 Gyro：MPU6000 Blackbox：8MB Betaflight OSD：YES BEC：5V 2.5A Uarts：5 ESC Telemetry：yes INA Pad：nuart2 Input voltage：2-6S Size:25*25mm /20*20mm φ3 mounting Weight: 4g Firmware：BETAFLIGHTF4 Moun…

ESC // SucceX-E Mini 35A Top Features: – 6 layers double-sided PCB board – 2oz 1.4mm thick power board – TDK MLCC Low ESR ceramic capacitors – Top grade 2R203 MOSFET Specification: MCU: BB21 F16G BLHeliS Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 35A / Burst: 40A BEC: No Supports up to Dshot600, Proshot, Oneshot, Multishot Targ et: G-H-30 Weight:6.9g Mounting pattern: 20*20, φ3mm with Grommets φ2mm Dimensions: 31*30mm (incl…

FC // SucceX-E F7 Top Features: – Gold-plated plug – BlackBox: 8MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Changelog: V1.0 – V1.4: Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented. Before BMP280 changed to DPS310 Before 8MB Flash changed to 16MB Flash Specifications: – MCU: STM32F22RET6 216 MHz –…

PRODUCT DESCRIPTION FC // SucceX-E F7 Top Features: – Gold-plated plug – BlackBox: 16MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Specifications: – MCU: STM32F722 216MHz – Gyro: MPU6000 – Baro: NO – OSD: IFLIGHT OSD （AT7456E） – BEC: 5V 2.5A – BlackBox: 16MB – Uart: 4*UART(UART1、UART2、UART4、UART5) – UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry – …

iFlight SucceX-E F7 Top Features: – Gold-plated plug – BlackBox: 16MB – Vista HD Plug-and-Play. No need to solder tiny wires. – BAT, +5V, 3.3, Start indicator – Smartaudio & IRC Tramp VTX protocol supported Specifications: – MCU: STM32F22RET6 216MHz – Gyro: MPU6000 – Baro: DSP310 – OSD: IFLIGHT OSD （AT7456E） – BEC: 5V 2.5A – BlackBox: 16MB – Uart: 4*UART(UART1、UART2、UART4、UART5) – UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry – UART2 fo…

PRODUCT DESCRIPTION Specs: – MCU：STM32F405 – Gyro：MPU6000 – Baro: NO – Betaflight OSD：IFLIGHT OSD （AT7456E) – Blackbox：16MB(W25Q128) – 4X Uarts – UART1 VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/Analog Telemetry – UART2 Receiver – UART4 Vacancy – UART6 ESC Telemetry – 1×12C – 1×SH1.0 10pin connector for ESC（GND/GND/BAT/BAT/M1/M2/M3/M4/CUR/R6) – 1 x SH1.0 6pin connector for Receiver（3.3V/RT2/5V/GND/R2/T2） – 1 x SH1.0 5pin connector for VTX/V…

SucceX-E F4 V2.1 Flight Controller features an STM32F405 MCU, MPU6000 gyro, 8MB Blackbox, 4 UARTs, 8 ESC outputs, Betaflight OSD, BMP280 barometer, VTX telemetry, WS2812 LED support, 5V/3A BEC, supports 2–6S LiPo (up to 8S max), and uses a 30.5×30.5mm mounting pattern.

PRODUCT DESCRIPTION The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. But the real magic of this flight controller lies in its TWIN GYRO configuration. The TwinG uses two identical gyros oriented side by sid…

The SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. But the real magic of this flight controller lies in its TWIN GYRO configuration. The TwinG uses two identical gyros oriented side by side with one offset 90 degre…

PRODUCT DESCRIPTION The iFlight SucceX-D Mini F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. But the real magic of this flight controller lies in its TWIN GYRO configuration. The TwinG uses two identical gyros oriented side by side …

PRODUCT DESCRIPTION The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. Features Universal USB Type C connector instead of micro USB Plug-and-Play. No need to solder tiny wires.) Supports BLHeli pass-through for eas…

PRODUCT DESCRIPTION The SucceX-D F7 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. Features Universal USB Type C connector instead of micro USB Plug-and-Play. No need to solder tiny wires.) Supports BLHeli pass-through for easy ESC…

PRODUCT DESCRIPTION The SucceX-D F7 V2.2 is designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module. Features Universal USB Type C connector instead of micro USB Plug-and-Play. No need to solder tiny wires.) Supports BLHeli pass-through for eas…

PRODUCT DESCRIPTION Top Features: DJI Plug-and-Play – No need to solder tiny wires! FC // SucceX-D F4 AIO Size：33*33mm Mounting pattern：25.5*25.5mm/φ3mm Connector：Micro-USB MCU：STM32F411 Gyro：MPU6000 Blackbox：16MB BEC output: 5V 2A INA pad：nR2 Barometer：no Constant current：20A，25A（Burst） Input：2-4S Current sensor：yes BLHeli：BLHeli-S ESC Telemetry：no Firmware Target：IFLIGHT_F411_PRO ESC Firmware：G-H-30 BLS Package Includes: – SucceX-D Whoop V3.2 F4 A…

This 20A F4 AIO whoop style board from iFlight is plug n’ play with the DJI Air Unit and Caddx Vista HD system. This all-in-one board is perfect for ultra-light and micro HD builds that use whoop-style mounting. (25.5×25.5mm) Features DJI Plug-and-Play – No need to solder tiny wires! BEC output: 5V 2A/10V 2A Specifications Size: 30.5×30.5mm Mounting pattern: 25.5mmx25.5mm Connector: Micro-USB MCU: STM32F411 Gyro: MPU6000 Blackbox: 8MB BEC: 5V 2A INA pad: nR2 Bar…

PRODUCT DESCRIPTION The traditional race wires prevent damage to wires or even propeller strikes from dropping you out of the air, while also making motor swaps super fast and easy without the need to open up your quad to access your 4in1 ESC or AIO board. that is a kind of progress of professional development. However, there’s still an extra soldering job needed to be done if you need to mount RGB LEDs on it. That’s why iFlight release this RGB 10 LED 3535 Multi-Colors Race Wire. It is de…

The traditional race wires prevent damage to wires or even propeller strikes from dropping you out of the air, while also making motor swaps super fast and easy without the need to open up your quad to access your 4in1 ESC or AIO board. that is a kind of progress of professional development. However, there’s still an extra soldering job needed to be done if you need to mount RGB LEDs on it. That’s why iFlight release this RGB 10 LED 3535 Multi-Colors Race Wire. It is designed with 2oz copper a…

Features Compatible with all USB Type-C powered hardware or cameras (GoPro Hero 5/6/7/8/9/10/11/12, Insta360, etc.) Stable power supply from any LiPo (4S-6S input) High power output (up to 5V/3A) Specifications Model: Type-C 90 degree to balance plug Product Weight: 5.5g Support: 4S-6S Output: 5V/3A Input Connector: XH2.54 Output connector: 90°Type-C Length: 110mm Packing List 1 xType C 90 degree to Balance Plug Power Cable

The iFlight Micro BEC features a step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 36V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (5 to 36V). * Short connect ON-12V, the output voltage is 12V 2A. When disconnected, the output voltage is 5V 3A. Features: – Step-down sw…

Description Introducing our Tiny LED Kit specifically designed for the Mach R5 Sport Analog. Easy to install and ready to brighten up your Mach R5 Sport. Don’t miss out, get yours now! Specifications Input voltage: 5V Size: 16.5*11*3mm Weight: 0.5g Current consumption: When using 8 Tiny LED Strips, the peak current is 0.8A (white light) LED button 1. Short press to switch colors (red, purple, yellow, orange, cyan, blue, green, white) 2. Long press to turn off …