This Skystars kit consists of 4 bars each equipped with 4 2812 RGB LEDs . These race wire LEDs have two functions: – Race wire only (motor supply via external pads). – LED by adding three other wires (inner pads) to power and assign the LED colors. You can use Race wire alone or Race wire + LED. Specifications Size: 33*8*2.5mm Weight: 1.12g PCB voltage: max 25V (6S) LED voltage: 5V Included 4x Power LED board 1x Wire set

Skystars KM65 65A F4 4in1 ESC The Skystars KM65 65A 4in1 ESC is a BLHeli32 4in1 ESC with fast F4 processor and 128KHz refresh rate. The KM65 supports upto 65A constant current and a very high 90A burst current. The flight controller is 30.5×30.5mm M3 mounting. The included metal heat sink helps with heat dissipation. The ESC runs BLHeli_32 firmware and has an F4 processor. The ESC is rated at 3-6S. Specifications of Skystars KM65 65A F4 4in1 ESC – Input voltage: 3-6S LiPo – C…

The Skystars H7 HD flight controller supports the DJI HD video system with a dedicated 10V output as well as traditional analogue video OSD. For analogue OSD the board features a dual channel analogue video switcher allowing two cameras to be connected. It features a high speed H743 processor and has 8 uarts for connecting peripherals. This version has a single BMI 270 gyro. Skystars H743 Single Gyro FC Specifications – MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash – Gyro: BMI270 – Baro: …

Experience bright lighting effects with the Skystars FPV LED Boards with Control Panel. With its control panel, you can customize the light to your liking, Leds On/Off, Flash mode and Led color for perfect lighting wherever you fly. Enjoy a professional FPV experience with Skystars. Specifications Input voltage: 7-26v ( 2-6s ) Output voltage : 5V/2A Mounting hole : 20*20*M3 Control panel size ： 32*9*3.5mm LED size :40*5*@mm ( 5LED ) Single channel can connect up to 24 light bea…

Skystars F7+KM65 is a powerful stack for 5″ freestyle and racing drones or 7-8″ long-range drones. The flight controller with modern F7 processor has 16MB memory for blackbox and 5V/3A and 10V/3A BEC. The flight controller can be conveniently used on a drone with both digital and analog video transmission. The pads for connecting the LEDs are in the corners. The integrated barometer for altitude measurement also comes in handy. The KM65 ESC supports 3-6S battery power and current…

Key Features Power supply: 3-6S Processor: STM32F405 Blackbox: 16MB IMU: BMI270 Integrated barometer BEC: 5V@3A, 10V@2A Connector for DJI FPV Mounting holes: 30.5×30.5mm M3 (with softmount) Current sensor ESC FW: BlHeli_S Package Includes 1x FC 1x ESCs 1x Accessory Kit

The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels. Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting. With an elegant, stylish, foldable and rotata…

Making decisions with your RC car or plane can be tough, and it’s even tougher when you lack proper information. Know the facts before you make modifications with the SKYRC GSM020 GNSS Performance Analyzer. This satellite-connected device records data from your remote control vehicle and records it for analysis. The analyzer connects with GPS and GLONASS satellite systems to read your vehicle’s speed, time, distance, velocity, acceleration, and G-forces, collecting all the data you need for anal…

Product Description: St-link supports a full range of STM8 / STM32 download debugging, with stable performance. Can be used to upload and debug ODESC firmware, color random delivery. Package Included: ST-LINK × 1 Cover DuPont Cable × 4 Product Size: Product Size: 56*20*8mm Net Weight Of Product: 9.7g Package Size: 60*100*10mm Packing Weight: 13g

Features High-performance STM32 F722 MCU with speeds up to 216MHz. Using MPU6000 with integrated accelerometer and gyroscope, stable and reliable. Built-in analog video OSD, 16M black box, SUART ports, 6PWM output ports, 2 ADC ports, 1 I2C port,1 camera control port. Integrated 36V input power supply, up to 6S lipo battery power supply, 5V 5A output. Modular cable design,with reliable locking structure,can be installed quickly, while retaining full-featured pads on the back,providi…

RushFPV Rush Blade F722 20×20 Mini Digital Flight Controller The Rush Blade Mini F722 Flight Controller is a 20×20 integrated flight controller that combines the MPU6000 high-performance 6-axis motion sensor, and a high-speed 32-bit STM32 F722 MCU to bring you unparalleled flight control capability. These features allow you to fly with full confidence even in tough environments. Easy DJI plug and play port. Note: This is a new batch from April 2022. Batches prior to this date have had qualit…

The Rush Blade PFB Power Filter Board by RUSHFPV was created to help the RUSH BLADES ESCs achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET’s and the power supply and can cause damage. This PFB board is suitable for any ESC but is perfectly matched for the Rush Blade 50A & 60A ESCs! The Rush Blade PFB is small in siz…

The RUSH BLADE F722 Stack for analog FPV System by RUSHFPV features the RUSH BLADE F722 Analog Flight Controller and RUSH BLADE 60A 3-6S BLHeli_32 128kHz 4-in-1 ESC (Extreme Edition), which can handle up to 6S input voltage and push your FPV racer to the max. SPECIFICATIONS: RUSHFPV RUSH BLADE F722 ANALOG FLIGHT CONTROLLER MCU：STM32F722RET6 GYRO：ICM42688P BEC： INPUT 7-36V / 3-6S LIPO，OUTPUT 5V 3A OSD ：AT7456E CVBS OSD BLACKBOX ：16MB FLASH TARGET： RUSH_BLADE_F7 PORT ：8×PWM…

BLADE 722 v2 Digtal version Features High-performance STM32 F722 MCU with speeds up to 216MHz. ICM42688P gyroscope, independent low-noise power supply. Built-in analog video OSD, 16M black box,5UART ports, 8PWM output ports, 2ADC ports, 1 I2C port. Dual high power synchronous rectifier BEC, supports up to 36V input and provides stable 5V/10V 3A output. Modular cable design, with reliable locking structure, can be installed quickly, while retaining full-featured pads on the back, p…

BLADE 722 v2 Analog version Features High-performance STM32 F722 MCU with speeds up to 216MHz. ICM42688P gyroscope, independent low-noise power supply. Built-in analog video OSD, 16M black box,5UART ports, 8PWM output ports, 2ADC ports, 1 I2C port, 1 camera control port. High power synchronous rectifier BEC, supports up to 36V input and provides stable 5V 3A output. Modular cable design, with reliable locking structure, can be installed quickly, while retaining full-featured pads …

Rush Blade F722 Digital 30×30 Flight Controller by RUSHFPV for your DJI Digital FPV System. This FC features high-performance STM32 F722 MCU, MPU6000, and Onboard OSD. Features of Rush Blade F722 Digital High-performance STM32 F722 MCU with speeds up to 216MHz. • Using MPU6000 with integrated accelerometer and gyroscope, stable and reliable. Built-in16M black box,Barometer,5 UART ports, 6 pwm output ports, 2 ADC ports, 1 l2C port. Integrated dual 40V input synchronous rectifier powe…

Rush Blade F722 Analog 30×30 Flight Controller For Analog by RUSHFPV. This FC features MPU6000, Onboard OSD, and beta flight firmware. Perfect for the Rush Tank II Video Transmitter . Features of Rush Blade F722 Analog High-performance STM32 F722 MCU with speeds up to 216MHz. • Using MPU6000 with integrated accelerometer and gyroscope, stable and reliable. Built-in 16M black box,Barometer,5 UART ports, 6 pwm output ports, 2 ADC ports, 1 l2C port. Integrated dual 40V input synchronous …

The Rush Blade 60A 3-6S 128kHz BLHeli_32 4-in-1 ESC Extreme Edition by RUSHFPV features, front & back special process aluminum shell, F4 MCU 200MHz with BLHeli_32 Firmware, 24kHz-128KHz PWM frequency 3oz dual board and 40V rated MOSFET. FEATURES BLHeli_32 firmware is the third generation of BLHeli firmware, following base BLHeli and BLHeli_S. 32-bit microprocessor running at a frequency of up to 200MHz for an excellent performance. Supports up to 128K PWM frequency, so the response spe…

Features Ultra small size for easy installation Built in automatic fast response gain control. No need to worry about ambient noise. Optimized for drones. High quality audio without need for configuration. Onboard Linear Anti Interference power supply. No more background audio noise floor. Specifications Input Voltage: 5V Dimensions: 12×6.5×2.8mm Weight: 0.3g Includes 1x Rush FPV Ultra-small External Automatic Gain Control VTX Microphone

In our FPV hobby, capacitors are becoming an essential component due to high power motors and noisy electronics. Don’t forget to use a capacitor to protect your electronic system and get better video quality! Description: Model Number: 50V 470uF Temperature: -55~+105°C Tolerance:±20% max Rated Voltage: 50V Includes: 1x 50v 470uf Capacitors

Brand Name Rubycon Item Shape Round Maximum Voltage 35 volts Model Number ZLH Number of Items 6 Operating Voltage 35 volts Part Number CAP130118 UNSPSC Code 32120000

When upgrading ELRS receivers, there are primarily two options: Wi-Fi and Serial Port. While Wi-Fi upgrading is very user-friendly and doesn’t require additional accessories, it can be susceptible to failures caused by unstable networks. For a more reliable and professional upgrade experience, RadioMaster ExpressLRS UART Flasher is your solution. This dongle is designed specifically for ELRS receiver serial port upgrades, providing a dependable and professional solution for flashing or recover…

Product Description 6061T6 Aluminum Alloy applied, full CNC processed. Applicable to X8, X6, X4 multi-copters. Fast and easy plug-in assembly The metal mount reduces flight vibration. Installation specification: M2.5 Installation pitch: 22MM Specification: Metal bottom mountx1 (28.3×17.3MM) 3.0G Metal GPS Mountx1 (29.4x12MM) 4mm CF link boltx1 (4x65MM)0.5G 7x29MM metal plugx1 4mm Phosphor Bronze ring x1 M2.5x5MM Hex Screw x2

Image for reference only! Product Overview EEUFR1J681L is a FR-series, Type ‘A’ radial leaded aluminium electrolytic capacitor. It is built upon Panasonic’s existing technology and allows for a quality, competitive product that better serves user requirements. This capacitor is suitable for switching mode adapters, line noise removal, and other products with long lifetime requirements. This series continues to provide excellent low ESR, high ripple current capabilities and can offer even…