Key attributes private mold: NO type: drone accessories place of origin: Hubei, China brand name: MAYATECH Product name: UAV Fixed Wing Exhibition Support Removable Brand: MAYATECH Material: Composite Material DIY: NO Product category: drone accessories

Product description : Input 4-14S LiPo / max. 60V. Output 5.30V / 3A -> +/- 0.05V –> Ripple 1mV @ 1.5A output current. Inclusive LDO power supply (+5.00V +/- 0.03V) for the sensor board PL-xxx as well as PL- Sensor Hub X2/X8 and output conector with Molex Clik-Mate 4p. Blue power “ON’ LED. 59mm x 29mm x 13mm / 26g with enclosure(without cables) Delivery in PP box: 55 x 55 x 20mm Scope of delivery: 1x 021: PL 4-14S HYB-BEC / 1x 5.3V / 3A 1x 040: PL – Series sensor cable / L=15…

200A – Current measurement sensor board, based on Allegro Hall Sensor ACS-200U. This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry… etc. The voltage reading of the LiPo is optimised for up to 6S LiPo packs. The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in…

100A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-100U. Voltage range is up to 20S (85V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400) Without CFK enclosure = 27.5 x 19.5 x 10.5m…

50A – Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS758-050U. Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the manual page for more details. This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2. Connected to the sensor are 2x10cm AWG12 wire (red) as a standard. REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400) Without CFK enclosure = 27.5 x 19…

MATEKSYS PM12S-3 Power Module The MATEKSYS PM12S-3 Power Module features 9-55V DC IN (3-12S LiPo), 3x independent Step-Down Voltage Regulators and BEC 5V, 4A continuous, 6A Peak, BEC 12V 4A continuous, 6A Peak and BEC Vx, 5.25V/6V/8V options, 15A cont., 25A Peak 1K:20K voltage divider built-in (Volt 1/21 Input voltage). Note: If the input voltage is noisy, capacitor is required to be soldered to the input pads. Features BEC Vx, 5.25V/6V/8V options,…

MATEKSYS Optical Flow & Lidar Sensor – 3901-L0X This sensor works the same way as an optical mouse, helping your iNAV quad maintain position without GPS! This module also integrates a laser time-of-flight range sensor. Specifications Optical Flow: PMW3901 Lidar: VL53L0X Interface UART Protocol: INAV MSP Working Range: 8cm~200cm Field of view: 42 degree(PMW3901), 27 degree(VL53L0X) Minimum Illumination >60Lux Input voltage: 4.5~5.5V Power Consumption: 40mA Size: 36*12mm,…

MATEKSYS MICRO BEC 6-30V TO 5V/9V-ADJ (3PCS) High Efficiency Synchronous Step-down regulator SPECIFICATION High Efficiency Synchronous Step-down regulator Wide 6V to 30V Operating Input Range Continuous load current: 1.5 Amps (Max.2.5A 5s/minute) VOut 5V or 9V Adj. Default is 5V. VOut Load Regulation: 2% Standby current: <5mA Maximum Duty Cycle: 95% OCP Protection and Hiccup Thermal Shutdown Output Short-circuit tolerant (5 seconds/minute) Pins distance: 2.54mm Size…

MATEKSYS M10Q-5883 GNSS & COMPASS The MATEKSYS M10Q-5883 supports GNSS (GPS, GLONASS, Galileo, and BeiDou) and thus offers excellent RF sensitivity. The SAM-M10Q uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. This feature will help you pick up the best signals. But also enhance the dynamic position accuracy with small a…

Description MATEKSYS H743-SLIM V3 FLIGHT CONTROLLER The MATEKSYS H743-SLIM V3 Flight Controller arrives with new features and improvements over the original! This FC is equipped with STM32H743VI, ICM20602 & MPU6000, DPS310, OSD, 7x UARTs, 2x I2C, 1xCAN, 13x PWM outputs, BEC5V, and much more! UPDATE V3, IMU ICM42688P, ICM42605 Features Equipped with IMU ICM42688P, ICM42605 Specifications MCU: STM32H743VIH6, 480MH…

MATEKSYS 12S Pro BEC – 9-55V To 5V/8V/12V – 5A The MATEKSYS 12S Pro BEC features a wide 9-55V Operating Input Range, 3x Output Voltage Options 5V/8V/12V and Supports continuous output current of up to 5A, peak current of 9A. This voltage regulator also features a synchronous switching step-down (buck) regulator, thermal Shutdown, output Short-circuit tolerance (2 seconds), overcurrent protection & self-recovery and much more! FEATURES: Synchronous switching st…

MATEK UBEC DUO 4A/5~12V & 4A/5V UBEC DUO Manual This device is a high-efficiency, switch-mode buck regulator with two output channels, works with 7~26Vdc input. One output channel is capable of supplying 0~4A/5V for your RX or Flight Controller. This device also features another output channel with 4A & 5~12V (adjustable), inbuilt power switch that is operated by a spare Aux Channel, this feature can also be used to power and switch on/off a wide variety of electric equip…

SAM-M10Q uses multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as…

MATEK PM20S-2 POWER MODULE 3~20S INPUT W/ 2X BEC The MATEKSYS PM20S-2 Power Module features 9-85V DC IN (3-20S LiPo) and 2 x independent Step-Down Voltage Regulators (BEC1 and BEC2) SPECIFICATIONS: PM20S-2 is made with 100V DC components. Support 9V to 85V DC operating Input voltage with 85V TVS protection 2x independent Step-Down Voltage Regulators Regulator 1 , 5.3V / 6.1V / 8.1V output options. supports typical continuous output current of up to 15A, Peak current…

Matek Micro BEC 6-60V to 5V/9V/12V. Get the voltage you need with this Matek BEC, convert 6-60V to either 5V, 9V, or 12V. This BEC defaults to 5V, select either 9V or 12V by soldering the respective jumper. Specifications Wide 6V to 60V Operating Input Range Start-up Voltage >=6.7V VOut 5V, 9V or 12V Adj. Default is 5V. Maximum Duty Cycle: 100%, when input voltage< setting value, Regulator output voltage = Input voltage Continuous load current: Depends on input voltage and h…

Electric Pen Features: 1. The heating tube is acid-resistant. Stainless steel material is not easy to rust. 2. Helps you cut polystyrene foam and similar materials more easily! 3. Start cutting foam at any position on the foam board. 4. Easily cut curves and advertising art. 5. Heats up quickly. The tube will reach 200 degrees within 10 seconds. Specifications: Type: Transformerless adapter with universal transformer Material: Stainless steel heat tube Diameter: 2mm Working power: 1…

JIYI Obstacle Avoidance Radar Module is mainly used to measure the relative distance between the drone and the obstacle in front of the flight, so as to avoid the obstacle effectively. Obstacle avoidance radar adopts 24GHz radar technology, which can work in all weather under strong light, high temperature, fog, dust, wind and night. Its sensitivity is high, the detection distance is long, the signal transmission is fast and stable. Electric wires, small trees with a trunk of 10 cm, people with …

JIYI KX Flight Controller JIYI KX flight controller is designed for industrial application scenarios, with redundant control of software and hardware. Compared to JIYI P3 , JIYI KX has advanced diagnostic algorithms to meet the applications of power line inspection, police, fire fighting, logistics, emergency rescue, transportation, surveying and mapping, etc. Provide API interface development according to different needs. Support More Peripherals 15KM Video & Data & RC Gimbal and…

JIYI K++V2 Flight Controller JIYI K++V2 Flight Controller is a new generation flagship flight controller system, K++V2 integrates the advantages of the classic flight controller K3A, and strengthens compatibility and multiple redundancy schemes to form a redundant control system with superior performance, strong reliability and effective guarantee work safety. Feature Precise Control-The flight accuracy of the route is increased by 25%. The vertical control accuracy is increased …

JIYI K3A PRO Flight Controller System Standard Version for DIY Special 4/6/8 Axis Agricultural Pesticide Spraying Drone JIYI K3-A Pro flight control is specially designed for agricultural sprayer drones. It has a variety of modes and exclusive functions for agriculture sprayer drones. It supports manual, semi-autonomous and autonomous flight. It can monitor drug flow in real time and intelligently match the spray volume to achieve precise UAV pesticide spraying . Equipped with professional App…

This Jiyi K++ V2 Flight Controller Kit is a professional-grade flight control developed by Jiyi and developed for industrial applications. It meets the needs of users such as plant protection, mapping, aerial photography, etc. Jiyi integrates the pursuit of high-quality products into the development of this flight control to make it more stable and reliable, but for the safety of you and others, it is strongly recommended that you remove the propeller when using the assistant software, and durin…

Terrain Following Radar The terrain following radar module uses millimeter-wave radar technology. Through continuous scanning of the radar, the aircraft can sense the terrain change in the flight direction, and adjust the flying height in time according to the terrain and crop height to achieve ground-like flight and ensure uniform spraying in flight. The ground-like radar module has stable detection performance and good environmental applicability, strong anti-interference ability, not affect…

he CAN HUB-12 module is mainly a CAN interface expansion device developed for Jiyi ’s new generation flight control K ++ and its peripheral supporting peripherals. It supports 6-14S power input, 12V CAN output, and 12V power output. The CAN HUB-12 interface has strong expandability. It integrates a step-down power supply and expansion interface into one, which is easy to use Features: Strong interface expandability; Integrated power supply and expansion interface. Good quality produc…

Description The 2RAW H7 Thunder represents a pioneering development in drone technology. It is distinguished as the first flight controller engineered to accommodate direct 12s input. The 2RAW H7 Thunder is crafted with an emphasis on durability and high performance, setting a new standard in flight controller design. Features High-Speed H7 Processor Powered by a high-speed H7 processor chip, it provides precise D-shot timings for enhanced performance, even with x8 motor config…